Canadian Electrical Industry News Week

April 20 2016

Investment in non-residential building construction declined for the fifth consecutive quarter, down 1.6% from the previous quarter to $12.5 billion in Q1. Nationally, the decrease reflected lower spending in all three components: commercial, institutional and industrial. Commercial buildings accounting for most of the decline. Lower spending was recorded in eight provinces, with Alberta posting the largest decline and Quebec a distant second.

Chart 1: Investment in non-residential building construction



 

 

 

 

 

 

 

 

 

 

In Alberta, the decline came mainly from lower investment in commercial and industrial buildings, as spending on institutional buildings has been on an upward trend since the third quarter of 2014. In Quebec, lower spending on institutional and commercial buildings was responsible for the decrease.

British Columbia and Saskatchewan were the only two provinces to register advances. In British Columbia, the gain was a result of higher investment in commercial and industrial buildings. In Saskatchewan, the increase came from institutional structures and, to a lesser degree, commercial buildings.

Census metropolitan areas

Non-residential building construction spending fell in 22 of the 34 census metropolitan areas in the first quarter, led by Edmonton, followed by Montreal, Winnipeg and Calgary.
In Edmonton, the decrease was attributable to lower construction spending on commercial and industrial buildings. In Montreal, lower investment in institutional building construction was largely responsible for the decline.

The decline in Winnipeg resulted from lower spending on institutional and commercial buildings. In Calgary, the drop was attributable to decreased investment in commercial buildings, which was partly offset by higher investment in institutional buildings and, to a lesser extent, industrial buildings.

Conversely, the largest gains occurred in Saskatoon and Vancouver. In Saskatoon, the advance came mostly from higher investment in the institutional component, while in Vancouver, the increase stemmed from all three components, with commercial buildings accounting for much of the gain.

Commercial component

Investment in commercial building construction fell 1.8% to $7.2 billion in the first quarter, marking a fifth consecutive quarterly drop. Investment was down in seven provinces, with declines spread across several commercial construction categories.

Alberta posted the largest decline, followed distantly by Quebec and Newfoundland and Labrador.

In Alberta, spending in commercial building construction was down 6.9% to $1.7 billion in the first quarter, marking the fourth consecutive quarterly decline. This was a result of lower investment in most commercial categories, particularly warehouses and office buildings.

In Quebec, investment fell 1.7% from the previous quarter to $1.1 billion in the first quarter, mainly attributable to lower spending on office buildings, communication buildings and warehouses.

In Newfoundland and Labrador, investment fell 21.0% to $69 million, a third quarterly decline. Lower spending on the construction of office buildings, hotels and restaurants, and warehouses was responsible for most of the decline.

British Columbia had the largest increase in commercial building construction in the first quarter, up 3.2% to $913 million. The advance resulted mostly from higher spending on the construction of retail and wholesale outlets as well as warehouses. Ontario closely followed, with higher investment in retail and wholesale outlets, office buildings as well as laboratory and research centres.

Chart 2: Commercial, institutional and industrial components



 

 

 

 

 

 

 

 

 

 

Industrial component

Investment in industrial building construction decreased 2.5% to $1.8 billion in the first quarter. This fifth consecutive quarterly decline was attributable to lower spending in most industrial building categories.

Construction spending on industrial buildings fell in six provinces. Alberta registered the largest decline, reflecting less investment in every industrial building category, mainly manufacturing plants and maintenance-related buildings.

The largest increase occurred in British Columbia, mostly as a result of higher investment in manufacturing plants.

Institutional component

Following seven quarterly gains, spending in the institutional component edged down 0.9% to $3.5 billion in the first quarter. The decline was a result of lower spending on the construction of educational institutions and medical facilities, which more than offset increased investment in nursing homes and government buildings.

Institutional building construction investment declined in eight provinces, with Ontario, Quebec and Manitoba registering the largest decreases. Lower investment in medical facilities and educational institutions explained the drop in Ontario, while less spending on educational institutions was responsible for most of the decline in Quebec. In Manitoba, investment in every institutional building category registered declines.

Alberta and Saskatchewan were the two provinces to register advances in the institutional component. In Alberta, the gain was attributable to higher spending on educational institutions as well as nursing homes and retirement residences. In Saskatchewan, the increase came mainly from higher investment in medical facilities.

Source: Statistics Canada, www.statcan.gc.ca/daily-quotidien/160415/dq160415b-eng.htm?HPA.

 

Changing Scene

  • Prev
Aspiring skilled trades participants recently descended upon annual Skills Competitions held in ...
Join WiRE and partners 20/20 Catalysts Program and the Aboriginal Apprenticeship Board of Ontario ...
A new program launched by Nova Scotia with federal government support will provide rebates of up to ...
The National Electrical Contractor Association announced on June 18 that Southwire has been ...
Located 160 kilometres west of the Porcupine mine in Chapleau, Ontario, Borden is set to be ...
  Schneider Electric, the leader in the digital transformation of energy management and ...
The 2018 IDEAL Nationals Championship is well underway across Canada. In fact, we have reached the ...
  Schneider Electric, the leader in the digital transformation of energy management and ...
 Electro-Federation Canada (EFC) announced the launch of its new brand identity last ...
WANTED: Skilled Electrician. Apprentice. or Team  Must be able to perform a simple wiring ...

Electrician Forum Brought to you by Schneider Electric

Schneider Electric

June 25, 2018

Sponsored by Schneider Electric

Today we are all concerned with the energy we consume within our homes. But how many truly understand the ins and outs of home energy use, and where exactly does the electrician and the development of energy management systems come into play. There is much to consider when discussing home energy use. The consumer first off needs to be informed about energy use, how it is calculated and ultimately billed if they are to make changes to their energy consumption rates. But in terms of educating consumers does the residential electrician have a role? And beyond that are manufacturers developing products designed to help electricians and consumers better understand residential energy use? Throughout this article we will deal with each of these important questions.

Read More

Codes and Regulations Brought to You by the CSA Group

  • Prev
In this article: Section 58 — Passenger Ropeways and Similar Equipment. Rule 58-000 ...
  Unauthorized CSA Group certification marks have been found on wiring by Triumph Cable ...
In this article: Section 52 — Diagnostic imaging installations. The CE code is a ...
In this article: Section 46 — Emergency Power Supply, Unit Equipment, Exit Signs, and ...
  In this article: Section 44 — Theatre Installations. The CE Code is a ...
CSA has published C22.2 No. 60947-7-3, the harmonized standard for low-voltage switchgear and ...
  Electric welders. The CE Code is a comprehensive document. Sometimes it can seem ...
  In this article: Section 40 — Electric cranes and hoists. The CE Code is a ...

 

Schneider

A new “future ready” circuit breaker from Schneider Electric is described by the company as the next generation of power distribution for the Internet of Things (IoT) era. Masterpact MTZ increases efficiency and can adapt to ever-evolving needs for safety, reliability and sustainability. The world is becoming more connected, electric, digitized, decarbonized, and decentralized, says Schneider Electric. Power distribution is facing new regulations, becoming more seamless and connected. 

Masterpact MTZ is the latest in a series of circuit breaker innovations, following Masterpact M, and then Masterpact NT/NW.

Read More



Tools for the Trade

  • Prev
  IDEAL Industries has introduced Combination Drill Taps to its tool lineup. Combining the ...
  Stripping and crimping device, 100 - 240 V input voltage, for insulated ferrules with a ...
Professional all-in-one cutter/stripper for coaxial and twisted pair cables     ...
  Klein Tools' Coax Explorrer 2 tests coaxial cable and maps up to 4 locations   ...
  Ideal Industries' T-14 wire stripper s are ideal for all professionals working within the ...
  The ATS850 conveyor eliminates all types of electro static discharge requirements. ...
  Lorik Tool & Automation has the experience and ability to manufacture a variety of ...
  Ideal Industries' 26 piece insulated Journeyman kit is ideal for new electricians or for ...
  Klein Tools Deluxe Fish Rod Set comes in 19 pieces that when assembled can fish wire and ...
  BendWorks Software was designed to help electrical contractors adopt this new process ...

Product News

  • Prev
  The DM62 measures AC/DC voltage, current (A, mA, μA), and resistance/continuity for ...
  LED Power • 100 Watt 12VDC Dimmable. AC Input Voltage: 120V 60 Hz. DC ...
  Slim LED area light Specification (200W/250W/300W/400W). Modular lens design, ...
  36lm per module. 8 modules per meter or 3 modules per foot. Maximum module ...
  The Wandering Star pendant light fixture wins the prestigious Red Dot award ...
  Bay Light Reflector Aluminum 60 Degree Beam      
  With a simple tap or swipe, the Interact Landmark Scene management app enables lighting ...
  Inline Speed Reducer - 2:1 Ratio, 7/8 in Input Size, C-Face Quilled Input Type, 7/8 in ...
  WEG has released the new generation of WEG Motors for heavy duty applications. ...
  Intelligent QUINT4 DC UPS, thanks to IQ Technology. You know the charging state and ...

 

Peers & Profiles

  • Prev
David Johns is a unique and dedicated individual both at home and in the workplace. At home he is a ...
    Sean Freeman is a vibrant, enthusiastic and selfless individual who has taken his ...
  Automation companies are drivers of innovation, and have penetrated near every industry ...
Total Electrical Solutions was founded in 2013 by Jeremy Herrington in Quispamsis, on the outskirts ...
Andrew MacLeod is a territory sales manager with Leviton Manufacturing of Canada in British ...
  Floyd Lau founded Amptek Technologies in 2002 as an end to end engineering design ...
Mike Marsh, President and CEO of SaskPower, has been a leading figure in Saskatchewan’s ...
Gordon MacDonald is a cheerful, driven individual who loves to be challenged, a trait that suits ...
  Most of us have a difficult enough time managing one job and a home life. However, some ...
  Since 2012 Barnstormer has advanced the abilities of their brewery with the installation ...

Copper $US Dollar price per pound


Jeremy Herrington

Total Electrical Solutions was founded in 2013 by Jeremy Herrington in Quispamsis, on the outskirts of Saint John, New Brunswick. Since 2013 Jeremy has steadily grown Total Electrical Solutions in the residential, commercial and construction sectors. The growth is primarily the result of Jeremy’s customer first philosophy, plus his over 20 years of industry experience.

Jeremy grew up learning about the industry from his father who was an electrical contractor. Jeremy spent his early years helping and watching his father as a contractor and business owner. After high school Jeremy was, like many, not wholly aware of the course he wished to take and so he began an electrical apprenticeship at his father’s company.

Read More

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2018 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil