Britech Electric Radian Heating Systems

BRITECH SNOW-CABLE units are designed to be installed under concrete, asphalt or interlocking bricks. Maximum flexibility, they are perfect for driveways, walkways, or ramp as well as stairways and irregular shapeds areas. BRITECH Snow Melting Cables are the perfect solution to new construction and landscaping renovations because of their tough construction and ease of installation.

The BRITECH PT – POWER TRACE system is ideal for frost protection, maintaining temperature and heat-up in pipes, tanks, vessels or at surfaces in non-ex areas and in explosive atmospheres for process industry. High output, high temperature, chemical resistant. The system is easy to design and install utilizing the required connection kits. The cable can be cut to length at the job site and installed directly on pipes simplifying the installation process and reducing waste.

The Britech Ground Fault Interrupter (GFI) panel is rated at 75, 100 or 200 Amp and can be used on single or three phase loads as required. The GFI panel consists of a three phase contactor, a current transformer (CT), GFI controller, and snow melt control system.

TraceMate Series Controllers not only control and monitor temperature but they also monitor your heat trace system for current and ground leakage. TraceMate™ Series Controllers are compatible with every type of electric heat trace and tubing bundle available.

TECH-MATS will warm tile, marble, ceramic, slate, vinyl, carpet, hardwood or laminate floors in your kitchen, bathrooms, foyers … anywhere in your entire home where warm floors would make a welcome addition. Because of their thin construction and ease of installation, BRITECH TECH-MATS are the perfect solution to new construction and home renovations. TECH-MATS will provide you with years of worry free warmth and pleasure.

Bri-Thin cables are an alternative to floor heating mats for tile and stone flooring. With high heating efficiency, they are a more economical option to floor heating mats and suited better for irregular shaped rooms. The cable can be easily formed and adapted to almost any geometrical layout.

This heating cable is deal for floor warming and radiant heating in concrete and wood floor constructions. They are also used in snow melting installations, frost protection of roof, gutters, drains, pipe tracing and soil heating applications, where each radiant heating system is custom designed.

 The heating cable units are ideal for floor warming and radiant heating in concrete and wood floor constructions. They are also used in snow melting installations, frost protection of roof, gutters, drains, pipe tacing and soil heating. Each unit has a unique factory made internal splice which is marked =>SPLICE<= on the cable surface. There is no need for a return conductor. The sealed end is 100% waterproof (factory made seal). The cold end is marked with snowflakes on the cable surface.

The DS-2B is the base model of the DS series. It is primarily designed for small satellite antenna/broadcast tower deicing, pavement snow melting applications, and use as a sensor for larger control systems. The unit may also be used as a stand-alone rain diversion controller for Ku band satellite applications.