Canadian Electrical Industry News Week

Apr 16, 2020

Electro MotorControllerThere are two types of electric motors, alternating current (AC) and direct current (DC). AC motors can be synchronous or asynchronous. Synchronous motors are found in applications where speed and accuracy are essential, including synchronous clocks, timers in electronic appliances, and audio recorders. Able to operate at variable speeds, low-maintenance, and durable, asynchronous, or induction, motors see wide industrial use. Applications such as lifting, mixing, pumping, compressing, and drilling find induction motors easy to operate and more cost-effective than synchronous and DC motors.

Of the two main types of induction (asynchronous) motors, single-phase and three-phase, the single-phase motors are usually limited to applications with small electrical loads, such as household appliances, because single-phase motors cannot self-start. Three-phase motor systems have much broader industrial and commercial use because they require less copper wiring and are therefore less expensive, smaller in size, more efficient, and run more smoothly (less vibration).

Sensata DRMS Hybrid Motor Starters offer the optimal solution for induction motors with six functions in the same unit including Forward/Reverse, Soft Start/Soft Stop, Motor Overload Protection, and Mains Isolating Relay.

Controllers are crucial

Motor systems rely on a starter, or controller, because it controls the performance of the motors by starting, stopping, forwarding, reversing, accelerating, and decelerating the motor as well as protecting it from overloads or faults.
The most basic controller is an on/off switch between the motor and the power supply, while the more complex controllers control the speed and torque of the motor.

Direct-on-line (DOL, or across-the-line) starters are the most basic type of motor starter; when energized, they immediately connect the motor terminals to the power supply. DOL starters are useful if the high inrush current of the motor does not cause excessive voltage drops in the supply circuit. These starters are suitable for small water pumps, compressors, fans, and conveyor belts. However, across-the-line starters cannot provide feedback.

In addition, in the case of an asynchronous motor, such as the three-phase induction motor, which draws a high starting current that is typically six to seven times that of the full load, the DOL starters will not be able to protect the motor from the inrush.

Protecting equipment and extending its life

Motor controllers face many forms of wear and tear. In particular, three-phase induction motor starters must deal with damaging factors such as inrush current and electric arcing.

Inrush current, also known as the switch-on surge or the input surge current, is the high level of current drawn by the motor to start accelerating to full speed. During this period, the motor often needs to draw in current that is up to seven to 10 times the normal operating load. Current overloading, although lasting less than one second, will cause torque surges that cause mechanical stress on the machine, especially when the start and stop cycle is repetitive. The basic DOL starters will not be able to protect the motor from the inrush. Therefore, the controller needs to have a protective mechanism to buffer the downstream equipment adequately.

Electric arcing — where the flow of an electric current through a gas causes electrical breakdown of the gas and discharge — occurs most frequently in motor controllers where contacts repeatedly open (break) and close (make) an electrical circuit. Electric arcing produces a large amount of heat, which will melt or even vapourize small parts of the contact surface, damaging the motor controller.

In addition to dealing with inrush current and electric arcing, three-phase induction motor starters also need a soft start and stop function. Soft starts and stops prevent damaging equipment as well as the heavy and bulky objects moved by compressors, conveyor belts, and gate systems. Due to their mass, such objects have considerable momentum even at low speeds.

Soft starters and variable frequency drives can both be used to protect the equipment and extend the life of the motor by reducing inrush current and the ensuing heat generation caused by frequent starts and stops.

Major types of motor starters

Motor soft starters, or reduced voltage solid state starters, can temporarily reduce the current load and torque surge during the start-up of a motor while smoothly ramping up the speed of the motor. As a result, the soft starter lowers the mechanical stress on the motor and shaft and lengthens the system’s life. Soft starters can be customized for individual applications. They can help avoid pressure surges in pump applications and start moving conveyor belts smoothly to aid in minimizing jerk, stress, or slip. Because soft starters have higher electrical complexity than across-the-line starters, they often incur cost-performance issues.

A variable-frequency drive (VFD) uses electromechanical drive systems to control motor speed and torque by varying motor input frequency and voltage. As a result, VFDs can reduce the current needed to start the motor. A VFD easily interfaces with automatic control systems. Variable-frequency drives are also highly energy-efficient, helping reduce peak energy demand. However, the global market penetration for VFDs is relatively small due to their high price point and sensitivity to environmental factors such as temperature and voltage surge.

While soft motor starters and variable-frequency drives already offer obvious benefits for motors, manufacturers are continuing to develop systems with greater functionality and lower price points.

Hybrid motor starter advantages

Sensata’s DRMS Series hybrid motor starters can provide up to six functions in the same unit: Forward/Reverse, Soft Start/Soft Stop, Motor Overload Protection, and Mains Isolating Relay.

With their soft start/stop feature, Sensata’s DRMS Series hybrid motor starters offer especially pronounced benefits to conveyor systems. In addition to their electromechanical relay feature, the DRMS Series hybrid motor starters include a solid state relay feature, which uses semiconductors for contact-free operation to achieve quick and wear-free power control.

With the performance offered by the solid state relay and the reliability of the electromechanical relay, the DRMS Series hybrid motor starters are more effective in mitigating the destructive effects of high inrush currents, the resulting mechanical stress, and the formation of gaps in the system. As a result, the combined relay features achieve higher performance and consistency, lower power consumption, better safety, and longer equipment life.

In addition, the DRMS Series hybrid motor starters are compact at only 22.5mm in width, which reduces the space requirement for a motor starter by up to 75 percent. Lastly, compared to variable-frequency drives, which cost anywhere from $400 to $1200, the DRMS devices offer a more economical option.

The DRMS Series hybrid motor starters can be used in conveyor systems, gate systems, and compressors by machine builders, panel designers or builders, and production facilities. Furthermore, these hybrid motor starters have a higher max motor rating of 400V versus other comparable products; the high max motor rating enables the use of DRMS Series hybrid motor starters in a wider range of industrial applications than other products can handle.

Conclusion

Motor starters for induction motors undergo many start and stop cycles. Factors to consider when comparing motor starters include performance, durability, reliability, size, price point, and protecting equipment from inrush current and other potentially damaging phenomena. Direct-on-line starters are reliable but offer little self-protection or protection for the assets the motors move. Greater protection is available with VFDs but at an expensive price point. Hybrid motor starters strike a balance between all these factors and therefore, deserve significant consideration for motors that work with valuable assets.

Source 

Changing Scene

  • Prev
A New Brunswick provincial program aimed at supporting and mentoring women in apprenticeable trades ...
Government Relations Minister Lori Carr announced the transfer of gas and electrical licensing ...
IDEAL continues to recognize the essential work electricians are doing during this global crisis. ...
Total investment in building construction increased 60.1% to $13.4 billion in May, ...
IDEAL Industries recently put together a new supply catalogue focused on panel builders and ...
ECAO is piloting a young leaders group, named Future Leaders Advisory Council (FLAC).   ...
Cooper Lighting extends its commitment to education and support of its customers and specifiers. ...
Stay Wired to Win is a monthly at-home challenge designed to keep your competitive spark going ...
Join the Electrical Contractors Association of Ontario (ECAO) for a live webinar on July 7 at 2:00 ...
Following the latest COVID-19 announcements from the Ontario Government, ESA has decided to ...


 

LDS Aug Products Eaton AL Series Dimmers 400Eaton's Wiring Devices AL series dimmers offer a versatile option for any dimming application - fine tune the dimming performance to match your exact needs and change colors as needed to suit any décor.

Color change kits come with three color faceplates, offering design flexibility within one product. Select models are available in 4 different color combination packs.

 

 


Read More

 

ESAAs the government continues a gradual, staged approach to reopen Ontario, ESA is assessing how they can safely resume in-person classroom training while adhering to Ontario Public Health guidelines. ESA is continuing to monitor key public health indicators and Stage 3 restrictions as efforts begin to reschedule previously postponed in-person classroom courses.

If you are registered in a postponed ESA course, they will notify you in the next couple of weeks of the rescheduled date. Please note that online courses are continuing as scheduled.

 

Read More

 


 



Case Study: EikoPro Electric LLC had a customer that had just constructed a new horse barn and was looking to light it quickly. The barn was designed to be lit with ten high bay lights for maximum efficacy and efficiency. Together with EiKO’s distributor partner, Platt Electric Redmond located in Redmond, Oregon, Pro Electric selected the EiKO 200W BAY-C high bay fixture, which puts out an impressive 30,000+ lumens at a 5000K color temperature. This high lumen output and the long life of the fixture – 72,000 hours – made it an ideal choice for the application.

Obviously, when lighting a barn, the security and safety of the animals, riders, and care givers is paramount. EiKO’s LED high bay products fill the space with light, eliminating shadows and blind spots.

Read More

Product News

  • Prev
Eureka announced the release of its Knit pendant. Knit provides high-quality lighting while ...
The SlimLED you know and love is now available with a 5-position CCT selectable switch.   ...
Intense Lighting, a Leviton company, today announced the launch of the highly anticipated V-Rail ...
Beluce has developed a line of social distancing signs and “face covering required” signs to remind ...
Eaton's Wiring Devices AL series dimmers offer a versatile option for any dimming application - ...
The YDD-L is an energy-efficient dusk to dawn yard light. It was designed for barns and ...
Arani's single-sided LED plastic running man sign comes in 2 versions: with battery, and without ...
With three shapes and 14 sizes available, Lumewerx’s latest addition to the Pop family comes in ...
Midwest’s Metallic RV power centers are a cost-effective favorite among campground owners ...
The IDEAL SLK® Disconnect Fuse Kit is a waterproof breakaway safety device that ...


 

Yard LightThe YDD-L is an energy-efficient dusk to dawn yard light. It was designed for barns and farms. It is a versatile and economic light source that is good on the environment and uses long-life LED’s. The YDD-L comes standard with photo control which helps to provide significant power savings.

Lens
Polycarbonate diffused lens encloses high performance LEDs.

 

 

 

Read More

 


 

Peers & Profiles

  • Prev
At 14, Tom Miguel was sitting in the counselor’s office of Silverthorn Collegiate Institute in ...
Meredith Halfpenny is a Wind Site Technician with Boralex where she inspects, maintains, and ...
Rutul Bhavsar is a final year Electrical Engineering student at Mohawk College. He recently ...
Shannon Tymosko is a first-year apprentice with IBEW (International Brotherhood of Electrical ...
ELG Electric is an electrical contractor based out of Goderich, Ontario serving the area’s ...
Founded by Warren Osak, Electromate specializes in Robotic and Mechatronic Solutions, distributing ...
 Will West is a first-year apprentice working in the solar industry with Hakai Energy ...
“It’s definitely the Olympics of our trade,” said Lance Giesbrecht of the Ideal National ...
Tommy Carducci is a 14-year industry veteran working with Seneca Electrical and was one of 18 ...
Legend Power Systems is an innovative Canadian company headquartered out of Vancouver, B.C. Their ...


Tom MiguelBy Sarah PickardTom Miguel

At 14, Tom Miguel was sitting in the counselor’s office of Silverthorn Collegiate Institute in Etobicoke with his entire life ahead of him. In 1981, the world was changing, and like so many young men and women, he was faced with a world of choices that would go on to define both his career and his life.

It was in this office that some counsellor suggested becoming an electrician, and Tom’s interest was piqued. “I knew from that point on what field of studies I needed to focus on to become an electrician,” Tom said.

 

Read More

 


Rutul Bhavsar 1 400By Blake Marchand

Rutul Bhavsar is a final year Electrical Engineering student at Mohawk College. He recently co-authored a whitepaper on Mohawk College’s Joyce Centre for Partnership & Innovation discussing the technologies utilized in the state-of-the-art zero-carbon/carbon-neutral facility. Rutul was the lead author on the project, supported by Dr. Mariano Arriaga, General Manager of Mohawk’s Energy and Power Innovation Centre (EPIC) and Dr. Tony Cupido Research Chair, Sustainability at Mohawk College. Rutul’s interests lie in the more progressive areas of the industry, automation, control, and energy efficient technologies.

Read More


 

Copper $US Dollar price per pound

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil