September 20, 2017

BendWorks Software was designed to help electrical contractors adopt this new process easily. BendWorks Software allows smooth information transferring between 3D electrical modelers and the electrical prefabrication shop or foreman on the jobsite.

BendWorks Software is a first of its kind add-in software application for Autodesk Revit and Revit MEP that helps designers more efficiently optimize electrical conduit runs. BendWorks Software ensures that all conduit runs are error-free and export-ready for prefabrication or on-site bending with most Greenlee benders, saving time and reducing cost for the electrical contractor.

For more information:

http://www.greenlee.com/products/BendWorks.html

 

 The Evolution Series. Poke-Thru Devices, Floor, Wall and Ceiling Boxes 

Legrand Wiremold EvoFrom poke-thru devices to floor, wall and ceiling boxes, the Evolution Series has continued to increase device efficiency and reliability while providing durability and quality. Customizing your space and maximizing access to all the power, A/V and communications you could ever need. Evolution Series boxes bring power, communications and A/V to walls, floors and ceilings. Evolution adds flexibility, functionality and stylish good looks to every room you create when planning office buildings, airports, schools and hospitals.

 

 

Watch the video Here

 

Alta EnergyAlta Energy has completed the installation of solar power systems at 14 campuses across California’s Poway Unified School District (PUSD). Alta Energy installed a total of 632 kilowatts (kW) on 65 of PUSD’s standard 24 by 40 feet relocatable, portable classrooms. Financed through a power purchase agreement (PPA) with no out-of-pocket costs to the district, the project reduces PUSD’s electricity expenses by nearly 15 percent and will save the district $250,000 per year.

 

 

Read More

 

 

 

Connected SecurityClimate change, a dwindling supply of natural raw materials, continuous migration to the metropolises: tomorrow’s challenges can only be solved with intelligent, networked buildings, so called smart buildings.

Networking encompasses all parts of a building — from the electricity supply, taking account of regenerative energy (smart grid), via safety and security technology and operational regulation through interconnected building-automation systems, to control via mobile devices. The prerequisite for all this is systems interoperability, the only way network risks can be mastered.

Read More

 

 

Tools for the Trade

  • Prev
  IDEAL Industries has introduced Combination Drill Taps to its tool lineup. Combining the ...
  Stripping and crimping device, 100 - 240 V input voltage, for insulated ferrules with a ...
Professional all-in-one cutter/stripper for coaxial and twisted pair cables     ...
  Klein Tools' Coax Explorrer 2 tests coaxial cable and maps up to 4 locations   ...
  Ideal Industries' T-14 wire stripper s are ideal for all professionals working within the ...
  The ATS850 conveyor eliminates all types of electro static discharge requirements. ...
  Lorik Tool & Automation has the experience and ability to manufacture a variety of ...
  Ideal Industries' 26 piece insulated Journeyman kit is ideal for new electricians or for ...
  Klein Tools Deluxe Fish Rod Set comes in 19 pieces that when assembled can fish wire and ...
  BendWorks Software was designed to help electrical contractors adopt this new process ...

 

Greenlee Versi-Tugger Handheld PullerEmerson announced the addition of a handheld puller to its Greenlee pulling lineup – the new G1 Versi-Tugger. The versatile and portable G1 is designed for pulls normally done by hand and can pull up to 68-percent faster when compared to manual pulling.

“We engineered and built G1 based on honest feedback from professionals,” said Adele Hendrix, product manager for Greenlee, Emerson. “We learned being fast wasn’t only about pull speed. From setup and pulling to unspooling the line after – the entire process should be quicker than pulling by hand. Our design delivers that speed.”

 

 

Read More

 

 


 

Paul HannaniaBy Blake Marchand

Held from November 7th to 9th in Orlando, Florida, the Ideal National Championships gives electricians a chance to display their skills in a high-level competition. For the first time, the event expanded internationally — over 55,000 electricians from 5 countries attempted to qualify for a chance to compete in the championship event.

For the second consecutive year, Paul Hannania was among the 162 professionals and apprentices to compete in the National competition. 

 

Read More

 

 

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil