|

Applying for CAF-FCA Apprenticeship Hiring Incentive Program

May 16, 2023

By Blake Marchand

The federal government launched their SME (small and medium enterprises) apprenticeship funding program back in September of 2022, the program will run until March 31st, 2024. You can receive from $5,000 to $20,000 of funding when taking on up to two new apprentices. Hiring apprentices from equity deserving groups doubles the amount of funding you receive per apprentice.

There are 19 service providers for the funding, you can find a full list HERE. This article focuses on CAF-FCA and the wrap-around services they can provide, although you may be better served working with one of the other 19 providers, depending on your area or trade.

As a service provider, Canadian Apprenticeship Forum has partnered with Aboriginal Apprenticeship Board, Canadian Construction Association, BuildForce, SkillPlan and Apprenticesearch.com to administer funding as well as provide wrap around services for contractors, journeypersons, and apprentices.

Applying for CAF-FCA Apprenticeship Hiring Incentive Program

BuildForce and SkillPlan are providing complementary training courses for apprentices and journeypersons as part of the program to help build mentorship, learning, and fundamental skills. While Apprenticesearch.com has a platform that can match apprentices with employers.

The funder for the program is Employment and Social Development Canada (ESDC), CAF-FCA works with them to facilitate the administration of funding.

Program Goal: Support the hiring and training of Level 1 Apprentices in Canada.

Who Can Participate? Small and medium-sized businesses:

Micro (1 to 4 employees)

Small (5 to 99 employees)

Medium (100 to 499 employees)

Financial Incentive: $5,000 per apprentice per year for a max of two Level 1 apprentices per employer; or

$10,000 per apprentice per year for a max of two Level 1 apprentices if the apprentice identifies as being from an under-represented group.

Location: Available across Canada

Trades: Employers hiring and training in 39 Red Seal trades are included in the program. Of the 39 Red Seal trades are construction electrician, industrial electrician, and powerline technician.

Applying to the Program

The funding is meant to offset the costs associated with taking on an entry level apprentice. Health and safety training, gear and equipment, accommodations for block training, or even offset wages. Essentially, the funding is yours once you receive it and you can decide the best way to utilize it.

The fiscal year started on April 1st, if you already received funding in the previous fiscal year, you are still eligible to apply for funding for two apprentices.

Equity deserving groups include women, indigenous peoples, newcomers to Canada, persons with disabilities, visible minorities, and folks that are part of the LGBTQ+ community.

Both the employer and the apprentice need to register at the program website, this is where the apprentice will indicate if they are a part of an equity deserving group or not. Which is a self-disclosure done voluntarily by the apprentice.

CAF-FAC value-adds includes the aforementioned matching service provided through Apprenticesearch.com. It’s more than just an algorithm, they have people behind the scenes that can help match you with apprentices in your area.

They will also provide complimentary access to a mentorship course and app for apprentices as well as journeypersons who may or may not have had an apprentice work under them before. The course is online and self-directed, it takes about 2-3 hours to complete.

SkillPlan and BuildForce engaged in research to determine six competencies that make people great mentors.

For apprentices, they will learn how to ask good questions and get the most out of their training.

CAF-FCA will also provide complementary essential skills training through SkillPlan and BuildForce. It’s called Build Your Skills to help apprentices with ratios, measurements, percentages; skills that get used on a regular basis on most construction sites.

If you are applying for funding through CAF-FCA, the first step is to go to Apprenticesearch.com/cas to register. After you complete the registration form you will be contacted by a Job Developer from Apprenticesearch.com, they will ask you for a sub-agreement between you and the program to indicate you will follow program guidelines and follow through on the apprenticeship training.

Once you lock into a service provider you can’t work with another provider for the year.

You’ll also need to provide an electronic funds transfer document to receive payment, as well as your training agreement/sponsorship document.

An important note is that you need to register with CAF-FCA before you register with your regional authority. The program isn’t retroactive, it’s only eligible for new apprentices.

The apprentice and journeyperson must register for the mentorship training before funding is released.

For union indentured apprentices, the funding goes to the company that is paying the apprentice.

Companies that are a subsidiary of a larger company are still eligible if their payroll is housed within the subsidiary company.

The application process will likely take at least 2-4 weeks, so although the program runs until March 31, 2024, it will be best to begin the application at least couple months before that deadline.

Go HERE for more information

Related Articles


Latest Articles

  • Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    February 6, 2026 The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or the explanations of individual Read More…

  • 3D Printing: Inside Lighting’s Next Revolution

    February 5, 2026 While 3D printing in mass production was once a dream, advancements in the technology have moved it more into the mainstream. The technique, which is also referred to as additive manufacturing, has rapidly evolved from a niche prototyping tool into a transformative production method for many sectors, including the lighting industry. As Read More…

  • Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    February 5, 2026 In an era of extreme weather, aging infrastructure, and ever‑rising energy demands, many facility managers are rethinking their relationship with the grid. Microgrids offer a way to take control and operate autonomously when necessary. A microgrid is more than just backup, when designed properly, it becomes a platform for resiliency, efficiency, and Read More…

  • ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    February 5, 2026 Understanding NEMA Ratings for Electrical Enclosures NEMA Ratings are an essential classification system used across North America to define the environmental and mechanical protection provided by electrical enclosures. Developed by the National Electrical Manufacturers Association (NEMA), these ratings help engineers, installers, and specifiers identify the appropriate enclosure type for industrial, commercial, and outdoor Read More…


Changing Scene

  • Lighting What’s Next: Stanpro Celebrates 65 Years

    Lighting What’s Next: Stanpro Celebrates 65 Years

    February 6, 2026 “We didn’t get here by standing still. For 65 years, we’ve shaped how we think, how we design, and what responsibility means,” the company said in a LinkedIn post. “Today, that thinking takes a new form. Not to change who we are, but to express our evolution more clearly. This is Stanpro, Read More…

  • Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    February 6, 2026 Efforts to support the creation of new affordable housing and reduce chronic homelessness are on track, but there is still lots of work to do, according to David Hickey, the minister responsible for the New Brunswick Housing Corporation. New data indicates progress has been made on three key government priorities related to Read More…

  • BJ Electric is now Bernie’s Electric Supplies Ltd

    BJ Electric is now Bernie’s Electric Supplies Ltd

    February 6, 2026 BJ Electric has announced the company has rebranded as Bernie’s Electric Supplies Ltd, a nod to their founder. “BJ Electric Supplies is now Bernie’s Electric Supplies—in honor of our founder, Bernard Joseph Thompson, and the values that have guided the company for nearly 50 years. As we grow and evolve, this name Read More…

  • The Government of Canada Introduces the Build Canada Homes Act

    The Government of Canada Introduces the Build Canada Homes Act

    February 6, 2026 The Government of Canada has introduced the Build Canada Homes Act, legislation that will establish Build Canada Homes as a Crown corporation whose mandate will be dedicated to building affordable housing in communities across the country. As Canada’s affordable housing builder, this legislation will equip Build Canada Homes with the necessary tools to Read More…