Contractor Bonuses By Job
Related Articles
Electrical Injury Day of Recognition
The Canadian electrical industry is calling on all tradespeople and those who benefit from them, to set aside October 6 as a day to raise awareness on the long-term consequences of electrical shock exposure.
SMS Engineering’s Bryan Smith on his Career and How Work Ethic Leads to Opportunity
Bryan Smith started his now 20-year career at the ground floor, so to speak, as a draftsperson and worked his way to a senior position at SMS Engineering, one of the largest independently owned consulting engineering firms between Calgary and Toronto.
Value of Building Permits Declines 4.6% in April
Municipalities issued $7.8 billion worth of building permits in April, down 4.6% from March. Declines were reported in every component except commercial buildings.
Electrician Job Vacancies & Assessing Labour Shortages in the Electrical Trade
January 25, 2024 Electrician Job Vacancies A report from Statistics Canada illustrates the electrician labour shortage in Canada, although the data looks at 2021 and 2022, it provides insight into where the industry is at with job vacancies for qualified electricians. For the thrid quarter of 2022, there were 5,275 job vacancies for construction electricians,…
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 1
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
Canadian Apprenticeship Strategy Investments in Training Equipment from 2022 & 2023 Call for Proposals
February 14, 2025 The Investments in Training Equipment funding stream, part of the Canadian Apprenticeship Strategy, helps unions and training providers improve the quality of training through the purchase of equipment and materials that meet the latest industry standards, or by investing in new technology needed to train workers in the Red Seal trades. These…
Electrical Injury Day of Recognition
The Canadian electrical industry is calling on all tradespeople and those who benefit from them, to set aside October 6 as a day to raise awareness on the long-term consequences of electrical shock exposure.
SMS Engineering’s Bryan Smith on his Career and How Work Ethic Leads to Opportunity
Bryan Smith started his now 20-year career at the ground floor, so to speak, as a draftsperson and worked his way to a senior position at SMS Engineering, one of the largest independently owned consulting engineering firms between Calgary and Toronto.
Value of Building Permits Declines 4.6% in April
Municipalities issued $7.8 billion worth of building permits in April, down 4.6% from March. Declines were reported in every component except commercial buildings.
Electrician Job Vacancies & Assessing Labour Shortages in the Electrical Trade
January 25, 2024 Electrician Job Vacancies A report from Statistics Canada illustrates the electrician labour shortage in Canada, although the data looks at 2021 and 2022, it provides insight into where the industry is at with job vacancies for qualified electricians. For the thrid quarter of 2022, there were 5,275 job vacancies for construction electricians,…
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 1
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
Canadian Apprenticeship Strategy Investments in Training Equipment from 2022 & 2023 Call for Proposals
February 14, 2025 The Investments in Training Equipment funding stream, part of the Canadian Apprenticeship Strategy, helps unions and training providers improve the quality of training through the purchase of equipment and materials that meet the latest industry standards, or by investing in new technology needed to train workers in the Red Seal trades. These…
Electrical Injury Day of Recognition
The Canadian electrical industry is calling on all tradespeople and those who benefit from them, to set aside October 6 as a day to raise awareness on the long-term consequences of electrical shock exposure.
SMS Engineering’s Bryan Smith on his Career and How Work Ethic Leads to Opportunity
Bryan Smith started his now 20-year career at the ground floor, so to speak, as a draftsperson and worked his way to a senior position at SMS Engineering, one of the largest independently owned consulting engineering firms between Calgary and Toronto.
Value of Building Permits Declines 4.6% in April
Municipalities issued $7.8 billion worth of building permits in April, down 4.6% from March. Declines were reported in every component except commercial buildings.
Electrician Job Vacancies & Assessing Labour Shortages in the Electrical Trade
January 25, 2024 Electrician Job Vacancies A report from Statistics Canada illustrates the electrician labour shortage in Canada, although the data looks at 2021 and 2022, it provides insight into where the industry is at with job vacancies for qualified electricians. For the thrid quarter of 2022, there were 5,275 job vacancies for construction electricians,…
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 1
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
Canadian Apprenticeship Strategy Investments in Training Equipment from 2022 & 2023 Call for Proposals
February 14, 2025 The Investments in Training Equipment funding stream, part of the Canadian Apprenticeship Strategy, helps unions and training providers improve the quality of training through the purchase of equipment and materials that meet the latest industry standards, or by investing in new technology needed to train workers in the Red Seal trades. These…
Latest Articles
-
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 30](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 30
Section 30, as outlined in rule 30-000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, protection, and control of all lighting equipment. Read More…
-
How ABB’s Hi-Tech Valiant™ Current Limiting Fuse for Fire Mitigation Impacts Safety & Reliability, Protecting the Environment & Critical Infrastructure
March 13, 2025 By Blake Marchand Discussing the Hi-Tech Valiant™ Fuse for Fire Mitigation with ABB’s Dominique Tardif There has been increased awareness on the impact of forest fires in recent years, as wildfire seasons have intensified in North America. We recently saw devastating fires in California, and in Canada, statistics show that each year wildfire seasons… Read More…
-
EFC Tariff Update Hub
March 13, 2025 EFC’s Tarrif Update Hub provides a centralized location for EFC actions, government advocacy, and key industry resources regarding the ongoing tariff situation between Canada and the United States. Designed to keep EFC members aligned and ahead of developments, check back for updates and insights to help you navigate the evolving landscape. EFC… Read More…
-
International Women’s Day 2025: Advancing Equity in the Skilled Trades
March 13, 2025 On March 8, 2025, CAF-FCA celebrates International Women’s Day (IWD) by reaffirming our commitment to breaking barriers and advancing opportunities for women and equity-priority groups in the skilled trades. This year’s theme, “For ALL Women and Girls: Rights. Equality. Empowerment,” is a powerful call to action—one that aligns with our efforts to… Read More…
Changing Scene
-
Mac’s II Agencies Strengthens Lighting Division
March 19, 2025 Mac’s II Agencies Announces Jamie Capell as the New Sales Manager for Lighting Specification Mac’s II Agencies is pleased to announce the expansion of its lighting division with the addition of Jamie Capell as the Sales Manager for Lighting Specification. Jamie brings 25 years of experience in the lighting and electrical industry, most notably… Read More…
-
RENO Lighting Announce New Vice President of Sales
March 19, 2025 It is with great excitement that RENO introduce Jean-Claude Lespérance as Vice President of Sales at RENO Lighting. With over 35 years of experience in the Canadian electrical industry, Jean-Claude brings unrivalled knowledge of the market and strong relationship with key industry stakeholders, suppliers, and customers. Holding a college diploma in Electrodynamics… Read More…
-
Canada Invests in Deep Energy Retrofits for Affordable Housing in Hamilton
March 13, 2025 There is a need and an opportunity for Canada to strengthen energy security and affordability for all Canadians. Canada’s buildings sector is the third-largest contributor to greenhouse gas emissions across the country. By increasing the scale and pace of building retrofits, we can make homes and buildings more energy-efficient and improve reliability in units. The federal… Read More…
-
Tesla Products Excluded from BC Hydro Incentive Program
March 13, 2025 CBC has reported that BC Hydro is excluding Tesla products from their EV charger incentive program. However, products purchased prior to March 12 will still be eligible. “As of March 12, Tesla chargers, energy storage batteries and inverters are not eligible for rebates, according to B.C. Hydro. Those who have purchased or… Read More…
