12 Myths Surrounding Industrial LED Lighting, Part 2

October 4, 2016

The fundamental difference between LEDs and traditional industrial lighting sources is the cause of many misconceptions surrounding LEDs. Unlike high-intensity fluorescents (HIF), high-intensity discharge (HID), high-pressure sodium (HPS) and metal halides, LEDs are semiconductors, not light bulbs.

The challenge now is that the outdated evaluation criteria, which were applicable to legacy lighting, are still in use. In this second of two articles, let’s continue delving into those myths and look at the underlying facts.

7. LEDs don’t work well in high temperature environments

During temperature tests conducted by independent labs, LEDs performed at least equally as well as fluorescents and HID (see note below on testing parameters). Quality matters and a well-designed lighting system that carefully manages heat dissipation is a prerequisite for lighting operating at any temperature — hot, cold or anywhere in-between.

At the same time, it is important to note that LEDs do perform extraordinarily well in cold environments, an area that has been particularly challenging for other types of lighting, such as fluorescent and HID.

Note: an important indicator of the quality of an LED solution’s heat/thermal management is junction temperature, which measures the internal temperature of the LED chip within the lighting fixture. For specified operating intervals — usually 6,000- and 10,000-hours — these values are commonly available as are part of industry standard tests performed by independent testing labs. Be sure to request all testing data documents from your LED supplier, including LM-80 and TM-21.

8. LED light is too blue

FACT: LED lighting is ‘cooler’ than many of the traditionally yellowish colours of high-pressure sodium and HID lights.

LED lighting is available in a variety of colours, most of which are in the 5000K temperature range, making them ‘cooler’ than the extra-yellow high-pressure sodium fixtures they frequently replace. Customer experience suggests that this is an advantage for LEDs, as they are quick to cite improvements in light quality and effectiveness as key attributes of their LED lighting installations.

9. LEDs are not bright enough for industrial applications

FACT: Increases in LED efficacy have made LEDs ideal for industrial applications.

When LEDs were first introduced, a limited range of output was available, some of which were not bright enough for high-intensity applications. This is no longer the case. Today, a complete range of fixtures — from relatively low- to extremely high-lumen outputs —are available to industrial customers, allowing facilities to select the intensity that is appropriate for its specific needs. Light levels can be further enhanced through proper optics that ensure that light placement is aligned with the application, e.g., narrow racked aisles have different requirements than open spaces. Further, with efficacy ratios approaching 100 lumens per watt, there is no more energy-efficient illumination source available.

10. LEDs are too bright for high-intensity applications

FACT: High-output lights are bright by design, but well-designed LEDs manage glare and light placement with optics.

All high-output lights are bright if you look directly at them and LEDs are no exception. As is typical with any new lighting installation, people check LEDs out by looking directly at them. Once the newness wears off, this typically passes quickly and is not a commonly heard complaint. Well-designed optics on LED fixtures also minimize direct brightness and glare perceived when looking at an LED fixture. And, LEDs now have excellent colour temperature for industrial environments.

11. Unlike traditional light sources, LEDs contain rare earth elements

FACT: All contemporary light sources (e.g., fluorescents, LEDs) use rare earth elements, but they’re not rare.

“Rare earth elements” is the label given to 17 chemical elements that, contrary to their name, really aren’t that rare. Specifically, rare earth phosphors (e.g. europium, terbium and yttrium) are used alone, or mixed together, to produce different colour-qualities or intensities of light. Unlike mercury, which is highly toxic, no special requirements exist for the disposal of products that use rare earth elements.

12. LEDs don’t dim smoothly

FACT: Well-designed LEDs offer smooth, gradual dimming to manage light levels and energy.

Once again, quality matters. Well-designed LEDs offer gradual dimming across millions of increments, enabling facilities to smoothly vary the amount of lighting reaching a particular surface.

Further, when it comes to dimming, one of the most important variables is control. Can each individual fixture, or group of fixtures, be dimmed to target settings? Can these settings be easily modified through centralized controls that support rules-based logic (e.g., if a space is unoccupied for more than a user-defined number of seconds, say 60 seconds, then dim the lights by a user-defined percentage, say 90%)? That granularity of control maximizes lighting functionality and energy savings.

Conclusion

Interest in LED lighting is at an all-time high as industrial facilities increasingly zero in on energy efficiency, sustainability and cost containment as key metrics for capital investment decisions. Given the importance of these metrics to a facility’s bottom line and long-term competitiveness, few question that LEDs will soon become the lighting technology of choice in the industrial sector. The key is for customers to become knowledgeable about LEDs — with accurate information, independent test data, and feedback from the growing base of real-world installations willing to talk about their successes. Be sure to ask any industrial LED lighting company you speak with for full test results (LM-79, LM-80 and TM-21), and relevant listings (UL, cUL, NOM, or CE, for example).

This article was first published online by Digital Lumens. Read the first 6 myths here: https://electricalindustry.ca/latest-news/2495-12-myths-surrounding-industrial-led-lighting

Related Articles


Latest Articles

  • Breaking out of a Winter Slowdown

    Breaking out of a Winter Slowdown

    March 10, 2025 For many Canadian electricians, winter months bring a painful slowdown in business. You’re grateful for your projects, but snowbanks, cold temperatures and slippery surfaces mean a half-day project eats up most of the day and the battery in your heated hoodie always seems to be on “empty”. Generate new business by strengthening… Read More…

  • How Technology is Reshaping Lighting Design: Augmented Reality, Sustainability, Smart Lighting, and 3D Printing

    How Technology is Reshaping Lighting Design: Augmented Reality, Sustainability, Smart Lighting, and 3D Printing

    March 10, 2025 By Kaitlin Burke, Lead System Engineer at Cooper Lighting Solutions & Rajat Bhayana, Lighting Product Manager at Cooper Lighting Solutions Technology is rapidly reshaping the lighting design industry, offering new ways to streamline workflows, enhance aesthetics, and optimize energy efficiency. In 2025, lighting professionals will have more tools than ever to balance… Read More…

  • A Powerful Partnership

    A Powerful Partnership

    March 10, 2025 By Milwaukee® Milwaukee® believes in the power of relationships. The global leader in hand tools and power tools has built its reputation over the past 100 years from the combination of producing high-quality tools designed for the jobsite, while continuing to go above and beyond their user’s expectations. A perfect example of… Read More…

  • ECAO Tariff Tracker

    ECAO Tariff Tracker

    March 7, 2025 ECAO is closely monitoring the evolving tariff battle between Canada and the US. ECAO are staying in touch with their industry partners and legal resources, and continually monitoring news feeds. In addition, they will be meeting with affiliate partners, suppliers and other industry players to plan implementation of possible solutions, to advise… Read More…


Changing Scene

  • IDEAL Electrical™ Unveils Fresh, Modern Brand Identity

    IDEAL Electrical™ Unveils Fresh, Modern Brand Identity

    March 7, 2025 IDEAL Electrical was the first company to obtain a patent to make and sell wire connectors in the United States 96 years ago this month – and today IDEAL® announces a modern look for the brand, which captures the company’s spirit of relentless innovation and the optimistic future of the electrical trade. … Read More…

  • Noramco Announce Promotion at London Branch

    Noramco Announce Promotion at London Branch

    March 7, 2025 Noramco has announced the promotion of Erika Liddle to Commercial & Industrial Account Manager – London. “Since joining us in September as Sales Support, Erika has embraced every challenge with determination, quickly making a strong impression. Her ability to learn, adapt, and build meaningful relationships with our customers has set her apart…. Read More…

  • Leviton Canada Unveils New Conveyor System at the Canadian DistributionCenter in Pointe-Claire, Quebec

    Leviton Canada Unveils New Conveyor System at the Canadian DistributionCenter in Pointe-Claire, Quebec

    March 7, 2025 Leviton Canada is thrilled to announce the unveiling of their new conveyor system at the Pointe-Claire (Quebec) distribution center, designed to boost efficiency and enhance service for their valued customers across Canada. With cutting-edge automation and improved accuracy, we’re ready to handle your orders faster and more reliably than ever before. This… Read More…

  • ESA President and CEO Named One of Canada’s Top Women in Safety

    ESA President and CEO Named One of Canada’s Top Women in Safety

    March 7, 2025 The Electrical Safety Authority (ESA) is proud to announce that Josie Erzetic, President and CEO at ESA, has been named one of Canada’s Top Women in Safety by the Canadian Occupational Safety (COS) magazine for 2025. The awards recognize exceptional female leaders who shatter glass ceilings while influencing the health and safety… Read More…