Contractor Salaries by Years of Experience
Older is better, with steady progress evident from one age group to the next.
Related Articles
Schneider Electric’s Masterpact MTZ Circuit Breaker: A Power Distribution Innovation
A new “future ready” circuit breaker from Schneider Electric is described by the company as the next generation of power distribution for the Internet of Things (IoT) era.
Quebec Region YPN Welcomed Three Industry Leaders to Discuss the Future of the Industry
November 18, 2024 On November 7th, the YPN Quebec Region hosted its last 2024 event, the YPN Panel discussion. The panel discussion was moderated by Marcos Simard of Wesco, President of the Quebec YPN Committee. Three leaders from the electrical industry, Gilles Motard, VP operation, Lumen, Corinne Galarneau, company VP, Agence Ricard, Stéphanie Santini, VP…
NETCO’s Virtual Reality Motor Control Training Launches After Successful Completion of Train-the-Trainer
The National Electrical Trade Council (NETCO), a collaboration between the International Brotherhood of Electrical Workers (IBEW) Canada and the Canadian Electrical Contractors Association (CECA), has taken a major step in standardizing electrical training across Canada with the launch of its VR Motor Control Training.
Britech: A Canadian Leader in the Electric Heating Cable Industry
Britech is one of Canada’s oldest and largest companies in the electric heating cable industry. Britech entered the electric floor warming and snow melting industry in 1996 when it became the exclusive Canadian representative for one of the first electric floor warming systems available in Canada.
Guide to the Canadian Electrical Code, Part I — Instalment 20
In this article: Section 36 — High Voltage Installations. The CE Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or the explanations of individual requirements contained in the CEC Handbook, but will hopefully provide some help in navigating the code.
Schneider Electric’s Masterpact MTZ Circuit Breaker: A Power Distribution Innovation
A new “future ready” circuit breaker from Schneider Electric is described by the company as the next generation of power distribution for the Internet of Things (IoT) era.
Quebec Region YPN Welcomed Three Industry Leaders to Discuss the Future of the Industry
November 18, 2024 On November 7th, the YPN Quebec Region hosted its last 2024 event, the YPN Panel discussion. The panel discussion was moderated by Marcos Simard of Wesco, President of the Quebec YPN Committee. Three leaders from the electrical industry, Gilles Motard, VP operation, Lumen, Corinne Galarneau, company VP, Agence Ricard, Stéphanie Santini, VP…
NETCO’s Virtual Reality Motor Control Training Launches After Successful Completion of Train-the-Trainer
The National Electrical Trade Council (NETCO), a collaboration between the International Brotherhood of Electrical Workers (IBEW) Canada and the Canadian Electrical Contractors Association (CECA), has taken a major step in standardizing electrical training across Canada with the launch of its VR Motor Control Training.
Britech: A Canadian Leader in the Electric Heating Cable Industry
Britech is one of Canada’s oldest and largest companies in the electric heating cable industry. Britech entered the electric floor warming and snow melting industry in 1996 when it became the exclusive Canadian representative for one of the first electric floor warming systems available in Canada.
Guide to the Canadian Electrical Code, Part I — Instalment 20
In this article: Section 36 — High Voltage Installations. The CE Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or the explanations of individual requirements contained in the CEC Handbook, but will hopefully provide some help in navigating the code.
Schneider Electric’s Masterpact MTZ Circuit Breaker: A Power Distribution Innovation
A new “future ready” circuit breaker from Schneider Electric is described by the company as the next generation of power distribution for the Internet of Things (IoT) era.
Quebec Region YPN Welcomed Three Industry Leaders to Discuss the Future of the Industry
November 18, 2024 On November 7th, the YPN Quebec Region hosted its last 2024 event, the YPN Panel discussion. The panel discussion was moderated by Marcos Simard of Wesco, President of the Quebec YPN Committee. Three leaders from the electrical industry, Gilles Motard, VP operation, Lumen, Corinne Galarneau, company VP, Agence Ricard, Stéphanie Santini, VP…
NETCO’s Virtual Reality Motor Control Training Launches After Successful Completion of Train-the-Trainer
The National Electrical Trade Council (NETCO), a collaboration between the International Brotherhood of Electrical Workers (IBEW) Canada and the Canadian Electrical Contractors Association (CECA), has taken a major step in standardizing electrical training across Canada with the launch of its VR Motor Control Training.
Britech: A Canadian Leader in the Electric Heating Cable Industry
Britech is one of Canada’s oldest and largest companies in the electric heating cable industry. Britech entered the electric floor warming and snow melting industry in 1996 when it became the exclusive Canadian representative for one of the first electric floor warming systems available in Canada.
Guide to the Canadian Electrical Code, Part I — Instalment 20
In this article: Section 36 — High Voltage Installations. The CE Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or the explanations of individual requirements contained in the CEC Handbook, but will hopefully provide some help in navigating the code.
Latest Articles
-
Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara
By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
Changing Scene
-
Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity
June 13, 2025 Eaton, and Siemens Energy have announced a fast-track approach to building data centers with integrated onsite power. They will address urgent market needs by offering reliable grid-independent energy supplies and standardized modular systems to facilitate swift data center construction and deployment. The collaboration will enable simultaneous construction of data centers and associated… Read More…
-
Latest Social Media Challenge Puts Students at Risk of Electrical Shock
June 13, 2025 The Electrical Safety Authority (ESA) is warning Ontarians that a shocking new social media trend is putting students at risk of serious electrical injury including shock, burns or even fires. A pair of dangerous social media trends have been gaining interest from students. One has kids “challenging” each other to stick a… Read More…
-
Plan Group Announce New VP of Electrical
June 13, 2025 Plan Group are proud to announce the promotion of Dave Scott as Vice President of Electrical. Dave has been a key part of Plan Group’s success for the last 16 years, leading with drive, accountability, and a deep understanding of what it takes to get the job done right. He will now… Read More…
-
Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26
June 13, 2025 On Monday, May 26, 2025, Electro-Federation Canada (EFC) held its Annual General Meeting, which included an update on key initiatives, the welcoming of a new Chair, and the election of the 2025-2026 Board of Directors. EFC President & CEO Carol McGlogan shared key highlights from the past year and provided a summary of the… Read More…
