From Past to Present: The Evolution of Emergency Lighting

Jeff Beare

May 20, 2021

By Noemie Belime

A conversation with Jeff Beare, Executive VP of Marketing at Stanpro, on the evolution of emergency lighting.

What was the state of emergency lighting when you first began in the industry?

I began working in Emergency Lighting on February 13, 1995. I remember this date very well because it was the day after my son was born. Emergency lighting hadn’t evolved much back then. We were still using 15 W T6.5 lamps as primary lamps in Exits and Sortie signs when AC was present as well as a single 6 W wedge base lamp in the center of the sign in Emergency or DC mode. Photometrics were not used to calculate paths of egress. Instead, we would use a rule of thumb metric. Looking back, people never thought of Emergency Lighting as innovative technology and still don’t think that, but in 1995, red LEDs were coming into use for Exit and Sortie signs because of their energy savings and longevity; they were costly, but highly efficient. There are signs in the Viger tunnel in Montréal that are original and still in good working order more than 20 years later.

How would you describe the evolution of emergency lighting to date?

Emergency LightingA lot has changed over the years, primarily the adoption of Running Man signs in 2010, as first published in the National Building Code and then adopted by various provincial codes shortly thereafter, as opposed to what had been used for decades, the words Exit and Sortie. Because of this shift, the LEDs used in signs migrated from Red to White because a Running Man sign has a green background with white pictograms as opposed to red when we manufactured Exit and Sortie.

LEDs are now the light source of choice for remote heads because of their high lumen output and low wattage consumption, resulting in longer durations on battery units and reduced capacity sizes. As authorities across Canada have become more aware of life safety in buildings, we are asked more often to provide point-by-point calculations for egress paths, so now IES files housed on our web site have become a necessity. The LED technology of today’s lighting fixtures is also allowing us to develop various methods of Emergency Lighting solutions such as our new patent pending LINK. This module basically transforms a normal lighting fixture used as a day-to-day lighting device into an emergency lighting remote in case of a power failure. I could talk more about the LINK, but I suggest you visit the product page or contact your Stanpro sales representative for more details. Lastly, I would add that bringing intelligence to Emergency Lighting is no longer the future, but rather the present. IoT is everywhere, so it only makes sense that life-safety devices are fitted as well.

What is Stanpro’s main strength in emergency lighting?

This is the easiest question of all: ”Its people”. Selling a product is one thing, understanding it is another. From senior management to all levels in between, when it comes to emergency lighting, we are the most knowledgeable company in Canada, bar none! We design, certify, build and sell our products right here in Canada. You will never meet a more passionate bunch. I always say, ”If you cut off our arms, we bleed Running Man signs”.

What are the most common regulation differences between Canada and the rest of the world in the field of emergency lighting?

Typically, I have often been asked this question. The most common answer to that question is duration. In Canada, the duration of an emergency lighting module runs from a minimum of 30 minutes all the way to 120 minutes, depending on the class of the building, whereas in the US, the standard duration is 90 minutes.

When compared to the rest of the world, I have a fun fact to share. Back in 2010, when running man signs were introduced in Canada, people thought we were going to be like Europe. The irony is that emergency lighting around the world has different versions of signs depending on the country’s jurisdiction. So, a running man sign is different in France, Germany, and the UK, etc. In an attempt to standardize this symbol, ISO adopted a Standard for Running Man signs entitled ISO7010 and when Canada adopted the Running Man, we followed the international standard. So, Canada is the first country to have adopted an international standard with respect to Running Man signs.

What is the future of emergency lighting?

For the most part, changes in emergency lighting are dictated by code, so it’s difficult to say. If I had a crystal ball and wanted to use a riddle, it would be ”The path to enlightenment will be your guide.”

Source

Related Articles


Latest Articles

  • Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara

    Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara

    By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…

  • Industrial Wiring Devices: A Brief Intro and How to Choose Them

    Industrial Wiring Devices: A Brief Intro and How to Choose Them

    June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…

  • Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience

    Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience

    June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…

  • Electrifying Connections: A Celebration of Legacy, A Vision for the Future

    Electrifying Connections: A Celebration of Legacy, A Vision for the Future

    June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections.   The energy and… Read More…


Changing Scene

  • Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity

    Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity

    June 13, 2025 Eaton, and Siemens Energy have announced a fast-track approach to building data centers with integrated onsite power. They will address urgent market needs by offering reliable grid-independent energy supplies and standardized modular systems to facilitate swift data center construction and deployment. The collaboration will enable simultaneous construction of data centers and associated… Read More…

  • Latest Social Media Challenge Puts Students at Risk of Electrical Shock

    Latest Social Media Challenge Puts Students at Risk of Electrical Shock

    June 13, 2025 The Electrical Safety Authority (ESA) is warning Ontarians that a shocking new social media trend is putting students at risk of serious electrical injury including shock, burns or even fires. A pair of dangerous social media trends have been gaining interest from students. One has kids “challenging” each other to stick a… Read More…

  • Plan Group Announce New VP of Electrical

    Plan Group Announce New VP of Electrical

    June 13, 2025 Plan Group are proud to announce the promotion of Dave Scott as Vice President of Electrical. Dave has been a key part of Plan Group’s success for the last 16 years, leading with drive, accountability, and a deep understanding of what it takes to get the job done right. He will now… Read More…

  • Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26

    Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26

    June 13, 2025 On Monday, May 26, 2025, Electro-Federation Canada (EFC) held its Annual General Meeting, which included an update on key initiatives, the welcoming of a new Chair, and the election of the 2025-2026 Board of Directors. EFC President & CEO Carol McGlogan shared key highlights from the past year and provided a summary of the… Read More…