Nexans Continues Its Commitment to Canada

Nexan's Fergus, Ontario plant to expand

June 5, 2016

Celebrating 50 years in Fergus, ON in June, Nexans has reinforced its commitment to Canada with a $15 million dollar investment in warehousing logistics and new equipment.

The increased capacity allows Nexans more capacity in the production of low voltage residential, commercial, and industrial cables, and a fundamental change in the way the company produces its wire products.

A community open house will be held on Saturday, June 11 from 10:00 am to 2:00 pm.

This technological edge and change in process did not come without the understanding the plant’s run rates would fall during the changeover, and the team at Nexans had to roll up their sleeves to make this change happen. The result: a state of the art wire plant.

Nexans to invest $15 million in Fergus, Ontario plant

The additions to the plant (a new warehouse facility on the north side) enlarged the facility from 285,000 to 385,000 square feet. A 100,000 square foot outside storage was added as well. This allowed the Milton warehouse facility to be moved to Fergus, and now the Fergus facility boasts a staff of 220.

 

 

 

 

 

 

 

 

The 50-year-old plant (shown here under construction in 1965/66) has had its share of continual change and focus.

Original Fergus plant under construction in 1965/66The 60-acre plant site was bought by Canada Wire and Cable and Essex Wire in 1965, which ran smaller cables for the automotive segment, morphing to its core focus of industrial and commercial product today. Its first full day of production was August 6, 1966. After Canada Wires’ acquisition of Essex in 1968 the plant became Canwirco and then again changed names after successive reorganizations to Alcatel and now Nexans.

The plant is located at 670 Gzowski Street in Fergus.

Related Articles


Latest Articles

  • Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    February 6, 2026 The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or the explanations of individual Read More…

  • 3D Printing: Inside Lighting’s Next Revolution

    February 5, 2026 While 3D printing in mass production was once a dream, advancements in the technology have moved it more into the mainstream. The technique, which is also referred to as additive manufacturing, has rapidly evolved from a niche prototyping tool into a transformative production method for many sectors, including the lighting industry. As Read More…

  • Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    February 5, 2026 In an era of extreme weather, aging infrastructure, and ever‑rising energy demands, many facility managers are rethinking their relationship with the grid. Microgrids offer a way to take control and operate autonomously when necessary. A microgrid is more than just backup, when designed properly, it becomes a platform for resiliency, efficiency, and Read More…

  • ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    February 5, 2026 Understanding NEMA Ratings for Electrical Enclosures NEMA Ratings are an essential classification system used across North America to define the environmental and mechanical protection provided by electrical enclosures. Developed by the National Electrical Manufacturers Association (NEMA), these ratings help engineers, installers, and specifiers identify the appropriate enclosure type for industrial, commercial, and outdoor Read More…


Changing Scene

  • Lighting What’s Next: Stanpro Celebrates 65 Years

    Lighting What’s Next: Stanpro Celebrates 65 Years

    February 6, 2026 “We didn’t get here by standing still. For 65 years, we’ve shaped how we think, how we design, and what responsibility means,” the company said in a LinkedIn post. “Today, that thinking takes a new form. Not to change who we are, but to express our evolution more clearly. This is Stanpro, Read More…

  • Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    February 6, 2026 Efforts to support the creation of new affordable housing and reduce chronic homelessness are on track, but there is still lots of work to do, according to David Hickey, the minister responsible for the New Brunswick Housing Corporation. New data indicates progress has been made on three key government priorities related to Read More…

  • BJ Electric is now Bernie’s Electric Supplies Ltd

    BJ Electric is now Bernie’s Electric Supplies Ltd

    February 6, 2026 BJ Electric has announced the company has rebranded as Bernie’s Electric Supplies Ltd, a nod to their founder. “BJ Electric Supplies is now Bernie’s Electric Supplies—in honor of our founder, Bernard Joseph Thompson, and the values that have guided the company for nearly 50 years. As we grow and evolve, this name Read More…

  • The Government of Canada Introduces the Build Canada Homes Act

    The Government of Canada Introduces the Build Canada Homes Act

    February 6, 2026 The Government of Canada has introduced the Build Canada Homes Act, legislation that will establish Build Canada Homes as a Crown corporation whose mandate will be dedicated to building affordable housing in communities across the country. As Canada’s affordable housing builder, this legislation will equip Build Canada Homes with the necessary tools to Read More…