IBEW and ECAO Promote Apprenticeship Model for Ontario

IBEW

Mar 18, 2019

The International Brotherhood of Electrical Workers Construction Council of Ontario (IBEW CCO) and the Electrical Contractors Association of Ontario (ECAO) have released a research paper they believe can assist the provincial government in its quest to introduce apprenticeship reforms.

“We look forward to working with the government to help them develop a model that will work,” says James Barry, Executive Chairman of the IBEW CCO.

The report — A Legacy for the Future: An Apprenticeship System that Works — was developed in response to the Ontario government’s recent announcement of plans to close the Ontario College of Trades and make changes to the provincial apprenticeship system.

“As leaders in training with the highest apprentice completion rates in the electrical industry, we believe we have the experience and knowledge to help the government with its reforms,” continues Barry.

The report — prepared by an independent expert in the industry — looks at apprenticeship systems across the country and what has worked and what has not been successful.

Specifically, IBEW-ECAO proposes that the new system be constructed on the following three pillars.

1. A Red Seal commitment

    • Alberta’s apprenticeship system has the highest percentage (3.9%) in Canada of registered apprentices in its labour force. This is because its strong Red Seal commitment ensures apprenticeship completion has real economic value to employers and workers.

    • British Columbia’s apprenticeship system has a much lower percentage (2.2%) because it moved to a skill set or modular certification system. This system has now been largely abandoned (90% cancelled) due to negligible economic value for employers and workers.

    • Ontario’s new apprenticeship system should focus on real economic value by basing all competency standards, all training standards, all scopes of practice, and all certificates of qualification on the Red Seal standards.

2. ESA enforcement

    • Ontario’s former apprenticeship system lacked adequate enforcement mechanisms. Enforcement responsibility should be assigned to the widely respected Electrical Safety Authority (ESA), which already has a statutory mandate to protect the public interest.

    • In addition, the ESA should take on administration of ratio rules and compulsory status in the electrical trades as well as authority for changing electrical trade status or responsibility. This would be replicated by similar respected authorities in other trades.

    • The cost of these new ESA functions should be funded by a levy on journeypersons, and ministerial oversight of the ESA should be increased.

3. Industry leadership

    • Apprenticeship system leadership, in the form of an independent Chief Training Officer, a 7-person board, and a streamlined organization, should be recruited from industry.

    • This new apprenticeship system should maximize effectiveness by maintaining authority for both training standards and for managing the delivery of training.

    • The mandate to alter the default 1:1 ratio should be vested in the Minister, not an adjudicative process. Default ratio changes would be recommended to the Minister by the Chief Training Officer based on industry engagement and economic forecasting.

“I would encourage our members to read this report and hope business managers arrange to share it with MPPs in their region as well as take the time to offer tours of our training facilities,” says Barry.

“By working with government in a constructive way, we can help ensure we have a skilled workforce for the future that has been trained safely and to the high standards the people of Ontario deserve.”

The report also offers suggestions on how to better promote compliance within the industry.

Read the full report here.

Related Articles


Latest Articles

  • Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    February 6, 2026 By William (Bill) Burr The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or Read More…

  • 3D Printing: Inside Lighting’s Next Revolution

    February 5, 2026 While 3D printing in mass production was once a dream, advancements in the technology have moved it more into the mainstream. The technique, which is also referred to as additive manufacturing, has rapidly evolved from a niche prototyping tool into a transformative production method for many sectors, including the lighting industry. As Read More…

  • Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    February 5, 2026 In an era of extreme weather, aging infrastructure, and ever‑rising energy demands, many facility managers are rethinking their relationship with the grid. Microgrids offer a way to take control and operate autonomously when necessary. A microgrid is more than just backup, when designed properly, it becomes a platform for resiliency, efficiency, and Read More…

  • ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    February 5, 2026 Understanding NEMA Ratings for Electrical Enclosures NEMA Ratings are an essential classification system used across North America to define the environmental and mechanical protection provided by electrical enclosures. Developed by the National Electrical Manufacturers Association (NEMA), these ratings help engineers, installers, and specifiers identify the appropriate enclosure type for industrial, commercial, and outdoor Read More…


Changing Scene

  • Lighting What’s Next: Stanpro Celebrates 65 Years

    Lighting What’s Next: Stanpro Celebrates 65 Years

    February 6, 2026 “We didn’t get here by standing still. For 65 years, we’ve shaped how we think, how we design, and what responsibility means,” the company said in a LinkedIn post. “Today, that thinking takes a new form. Not to change who we are, but to express our evolution more clearly. This is Stanpro, Read More…

  • Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    February 6, 2026 Efforts to support the creation of new affordable housing and reduce chronic homelessness are on track, but there is still lots of work to do, according to David Hickey, the minister responsible for the New Brunswick Housing Corporation. New data indicates progress has been made on three key government priorities related to Read More…

  • BJ Electric is now Bernie’s Electric Supplies Ltd

    BJ Electric is now Bernie’s Electric Supplies Ltd

    February 6, 2026 BJ Electric had been teasing a major announcement on their social media recently, before finally announcing last week they have rebranded as Bernie’s Electric Supplies Ltd, a nod to the company’s founder and legacy. “BJ Electric Supplies is now Bernie’s Electric Supplies—in honor of our founder, Bernard Joseph Thompson, and the values Read More…

  • The Government of Canada Introduces the Build Canada Homes Act

    The Government of Canada Introduces the Build Canada Homes Act

    February 6, 2026 The Government of Canada has introduced the Build Canada Homes Act, legislation that will establish Build Canada Homes as a Crown corporation whose mandate will be dedicated to building affordable housing in communities across the country. As Canada’s affordable housing builder, this legislation will equip Build Canada Homes with the necessary tools to Read More…