Northern Cables TECK90 Vertical
September 2, 2024
Northern Cables Inc.’s TECK90 is an interlocked armoured cable for use in petro-chemical, pulp and paper, and other industrial application environments. TECK90 can be used in open and concealed wiring, direct burial, and in hazardous locations.
The insulated conductors are made with cross-linked polyethylene and twisted with an uninsulated ground wire. The twisted core is covered with a PVC jacket, then covered with either interlocked aluminum or galvanized steel, and covered with a PVC jacket over the armour.
TECK90 is manufactured to CSA C22.2#131 and CSA C22.2 #174 to allow it to meet the certain CSA tests including; flame test FT4,-40C cold temperature impact test, low acid gas and sunlight resistance.
TECK90 is available in 600 and 1000-volt constructions from #14 to 500 kcmil in copper. Cables can be manufactured up to 50 conductors. Custom cables are available upon request including composites, vertical riser, and coloured jackets.
Ideal for:
- Vertical applications
- Concealed wiring in both dry and wet areas
- Exposed wiring, even in corrosive environments
- Weather-exposed installations
- Ventilated, non-ventilated, and ladder-type cable trays
- Direct earth burial with required protection
- Service entrance, above or below ground
- Variable frequency drive applications
Go HERE for more information
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 60 — Electrical Communications Systems](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
