Swing-Out Industrial Wall Mount Rack Cabinet
December 1, 2024
- Dual access to equipment via the double hinge design for indoor industrial applications.
- The main body and door swing from right-to-left.
- The entire cabinet can be flipped 180 degrees to mount and swing left-to-right.
- Available in three options:
- “N” Version comes without climate control or cutouts.
- “F” Version includes rear and door filters that maintain UL Type 12 ratings. Compatible with fan kits (See table below).
- “A” Version comes bundled with a 900-1300 BTU DTS3021A115LG air conditioner (shipped inside the cabinet) along with a cord.
- All options are available with a solid or window door.
- The door is removable and swings more than 120 degrees.
- The middle section swings to 130 degrees to access the rear pan, allowing for easy maintenance.
- Both door and middle section include draw-latching locks, keyed alike.
- Optional padlock kit available.
- The heavy-duty rear pan is constructed in 14-gauge welded steel and features a hinge pin for easy installation.
- A heavy-duty wall mounting back pan can be used for cable entry.
- The rear of the enclosure include factory-installed external mounting feet positioned sixteen (16) inch centers.
- Two (2) pairs of adjustable depth threaded 10-32 EIA-compliant rack rails.
- Includes starter pack of SCREW1032-50
- Looking for a third (3) pair of rails? Order our corresponding RU from our H1 Rails.
- Bonding studs are provided on the door, body and back pan.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit is sold separately.
Specifications
- Constructed in 14-gauge steel.
- Window door constructed with UV-resistant polycarbonate material.
- UL Listed 2416 Type 12 rated with a load rating of 350 lbs (158 kg).
- Complies with NEMA Type 12.
- Independently tested to IEC 60529 and IP56.
- Seismic rated up to 200 lbs (90.72 kg) of dynamic load with an Ip factor of 1.5 in accordance with the IBC 2018, CBC 2019, NBC 2018, ASCE 7-16, and ASCE 7-10.
- Rack rails are drilled and tapped 10-32 to EIA 19″ standards and are finished in a smooth powder coat.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- Finished in a textured RAL7035 light gray or RAL9005 black powder coat.
- TAA-compliant for GSA Schedule purchases.
- BAA/TAA-compliant documentation available upon request.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Go HERE for more information
