HALO Solar Area/Barn Light from Cooper Lighting Solutions

April 27, 2026

The Halo Outdoor Solar Area/Barn Light – a durable and versatile lighting solution for any outdoor space. With LED technology and a traditional barn light design, it’s perfect for residential, rural, and off-grid settings. Choose from 3 lumen packages and 3 selectable modes, including PIR motion sensor, dusk-to-dawn functionality, and a 120° detection range. Easy to install with a 90-minute operation time and an 8-hour recharge time, it’s a convenient, affordable, and dependable lighting solution for all-night use.

The light fixture will remain inactive in this mode even after the sun has set. Nevertheless, once motion is detected, it will activate itself with a remarkably bright output, ensuring maximum visibility. When there is no further motion detected, the light will turn off automatically to conserve battery life.

Dusk to Dawn Mode

When operating in this mode, the light fixture will activate automatically at a dim level of brightness once the sun sets. It will remain on for the entire night or until a duration of 12 hours has elapsed, after which it will turn off once the sun rises again.

Barn

Motion + D2D Mode

When set to this mode, the light fixture will automatically turn on at a dim brightness level once the sun sets. If it senses motion, it will increase in brightness for a set amount of time before returning to the dim level once again. This cycle will continue until the sun rises.

Features

  • Off-Grid – completely free to operate, plus no expensive wiring required
  • All-in-one design with LED, Solar Panel, and Battery built in for easy installation
  • 3 lumen packages at 5000K for varying brightness needs (1000, 1500, 3000 lumens)
  • Motion sensor included with 120° detection range and 25’ distance
  • 3 selectable modes of operation with remote control
  • Including Motion, Dusk-to-dawn, and Motion + Dusk-to-dawn
  • Battery runs up to 90mins at maximum output on full charge and lasts up to 500 cycles
  • Battery recharges in 8 hours in full sun
  • Fixture can be mounted up to 15ft on a wall or pole
  • 1-year warranty for added peace of mind
  • D2D mode runs for 8 hours at 10% lumen output
  • 8-hour recharge time to 10


Product Specificatinons

Related Articles


Latest Articles

  • NSAA Apprenticeship Management System (AMS) is Now Available

    NSAA Apprenticeship Management System (AMS) is Now Available

    June 19, 2026 NSAA has now launched the Apprenticeship Management System (AMS) to provide a faster, easier, and more transparent way for apprentices and employers to manage apprenticeship activity. For Apprentices, Apprenticeship Management System will allow you to:  For Employers, with Apprenticeship Management System, you will be able to:  For Tradespersons Your launch of Apprenticeship… Read More…

  • IP Ratings in Lighting: What They Actually Mean in the Field

    IP Ratings in Lighting: What They Actually Mean in the Field

    By CSC LED IP ratings are among the most frequently referenced specifications in lighting, yet they are often misunderstood or oversimplified. While they may appear to be just another number on a specification sheet, IP ratings play an important role in determining where a fixture can be installed and how it will perform over time.… Read More…

  • The Role of Offshore Sourcing: An Editorial Perspective for Manufacturers, Distributors, Agents, Contractors, and Industry Stakeholders

    The Role of Offshore Sourcing: An Editorial Perspective for Manufacturers, Distributors, Agents, Contractors, and Industry Stakeholders

    The real divide is not domestic versus offshore. It is between committed, accountable partners and transactional, price‑only players. The CSA mark sits inside that story as one important signal but it is only a subset of what the market should be looking at. Read More…

  • Alberta OHS Code Review

    Alberta OHS Code Review

    June 15, 2026 Albertans are invited to provide feedback for Alberta’s ongoing review of Alberta’s OHS Code. Complete the surveys by July 8. Albertans are invited to participate in our ongoing review of the Occupational Health and Safety Code (OHS Code). This is an opportunity to improve health and safety outcomes for workers and streamline… Read More…


Changing Scene

  • AEMC® Instruments welcomes Mark Stathenas as Authorized Factory Representative for Eastern Canada

    AEMC® Instruments welcomes Mark Stathenas as Authorized Factory Representative for Eastern Canada

    June 19, 2026 AEMC® Instruments, part of the Chauvin Arnoux Group® welcomes Mark Stathenas as Authorized Factory Representative for Eastern Canada.  Mark will serve as your primary point of contact for product information, technical support, and order coordination in the Eastern Canada region. With over two decades of experience in technical sales, distribution and business development, Mark brings a… Read More…

  • BCCA Response to Investment Announcement

    BCCA Response to Investment Announcement

    June 19, 2026 Statement from BCCA: The British Columbia Construction Association (BCCA) welcomes today’s joint announcement by the federal and provincial governments to invest in housing, infrastructure, healthcare, and public transit across British Columbia, including funding to reduce Development Cost Charges (DCCs). These investments will help support the infrastructure needed to enable new housing and… Read More…

  • ECAO Recognition of Safety Achievement Award Recipients

    ECAO Recognition of Safety Achievement Award Recipients

    June 15, 2026 ECAO is proud to recognize the recipients of their Recognition of Safety Achievement Award. This award honours member companies that demonstrate exceptional commitment to workplace safety through outstanding safety performance and a strong culture of prevention. The Recognition of Safety Achievement Award celebrates organizations that maintain injury and illness statistics below the… Read More…

  • ECS Announces the Promotion of Jeff Bartlette to Branch Manager, Winnipeg

    ECS Announces the Promotion of Jeff Bartlette to Branch Manager, Winnipeg

    June 15, 2026 ECS is pleased to announce the promotion of Jeff Bartlette to Branch Manager, Winnipeg. Jeff joined ECS with a mandate to establish the company’s presence in Manitoba. Having successfully balanced both sales and leadership responsibilities, he will now focus fully on developing his team, strengthening branch capabilities, and positioning Winnipeg for continued… Read More…