Ask Britech your questions Here

 

 

Heating CableOcotber 17, 2017

The BRITECH PT - POWER TRACE system is ideal for frost protection, maintaining temperature and heat-up in pipes, tanks, vessels or at surfaces in non-ex areas and in explosive atmospheres for process industry. High output, high temperature, chemical resistant. The system is easy to design and install utilizing the required connection kits. The cable can be cut to length at the job site and installed directly on pipes simplifying the installation process and reducing waste.

Technical Data

VOLTAGE: Available from 120 to 254 Volts (AC)
HEAT OUTPUT: 3~18 watts/ft
INSTALLATION TEMP:
Minimum installation temperature: -60°C
Minimum switched on temperature: -60°C

OPERATING TEMP: 
Max. operating temperature switched off max. 190°C (1000 hours cumulative)
Max. operating temperature switched on max. 120°C  
CABLE DIMENSION: 10.2mm x 4.8 mm
MIN. BENDING RADIUS: 25mm

http://www.britech.ca/sr.html

 

Emergency Lighting PrinciplesBy Kevin Smee, Vice President Sales at AimLite

Most of us take light for granted. It has become so ubiquitous and cheap to use that we don’t really stop to think about emergencies. Thankfully most buildings are required by law since 1974 to be equipped with emergency lighting that automatically activates during power failures to facilitate our exit.

Emergency lighting is only one component of a building’s life safety systems, but perhaps one of the most important. 

 

 

Read More  

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil