UL, ALA, NEMA Collaborate to Offer Ultraviolet Light Safety Guidance

LDS UVC UL 400

August 6, 2020

With a shared commitment to the safety and performance of electrical lighting, UL, the American Lighting Association (ALA) and the National Electrical Manufacturers Association (NEMA) have released a new position paper due to an increased demand for sanitizing and germicidal capabilities in the face of COVID-19. The position paper has two goals: to bring attention to ultraviolet light device safety risks; and to help manufacturers, retailers and consumers understand which devices are safe and under what conditions they can be operated safely.

The paper, “Ultraviolet-C (UVC) Germicidal Devices: What Consumers Need To Know, provides a deeper look at the UVC germicidal devices available to consumers and their potential to cause severe injuries to humans and pets, as well as damage to plants and materials.

“We are all extremely concerned about the impacts and elimination of COVID-19 and what can be done to mitigate the spread of the virus.  In this current global situation, the growing interest around sanitation and germicidal properties is putting UVC devices in greater focus than ever before,” said Todd Straka, global industry director of UL’s Lighting division. 

“There has been an alarming rise in the availability of consumer-facing ultraviolet germicidal devices that don’t effectively contain UVC light and carry very serious risks, including permanent eye, skin and lung damage. This is a major safety issue that urgently needs to be communicated to consumers and potential users of these devices. By teaming up with ALA and NEMA, who also share these concerns, we are aiming to educate consumers and manufacturers regarding the potential safety risk implications of using UVC light,” Straka said.

Ultraviolet (UV) naturally occurs in three types: UVA, UVB and UVC, all of which have certain benefits and pose certain hazards. While UVC is the type that has proven to have the most germicidal benefits, including killing bacteria and inactivating viruses, any uncontained UVC exposure that is strong enough to kill germs is a risk to people, pets and plants.

“Uncontained UVC germicidal products used in a healthcare setting do have benefits to help stop the spread of COVID-19. However, unlike those being marketed to consumers, they are used by trained professionals who have taken appropriate safety training and use the appropriate protective equipment to take precautions against UVC overexposure,” said Terry K. McGowan, director, Engineering and Technology, American Lighting Association.

“As the leading residential lighting industry trade association, it is our duty to promote the proper, safe application of lighting products, while also communicating to our members and the public lighting safety risks. By collaborating on the UVC position paper with safety expert UL and NEMA, ALA wants to help communicate to the lighting industry the importance of developing and marketing products that can be safely operated without risk to human health,” McGowan said.

“We know that UVC is a proven way to help eliminate dangerous bacteria and viruses in water, air and on surfaces. Nevertheless, in the midst of COVID-19, we are concerned about proliferation of UVC disinfecting devices being sold with uncertain safety features and incomplete operating instructions,” said Karen Willis, industry director, Lighting Systems, National Electrical Manufacturers Association.

“Establishing and maintaining the safety of UVC devices is a priority for NEMA and across the lighting industry in all sectors, including consumer, commercial and healthcare applications. We are proud to be a part of this important educational effort,” Willis said.

The “Ultraviolet-C (UVC) Germicidal Devices: What Consumers Need to Know position paper, a detailed chart of UVC products for consumer, commercial, healthcare and UVC germicidal device components and information about their path to certification can be found at UL.com/uvlighting.

Source

Related Articles


Latest Articles

  • Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara

    Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara

    By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…

  • Industrial Wiring Devices: A Brief Intro and How to Choose Them

    Industrial Wiring Devices: A Brief Intro and How to Choose Them

    June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…

  • Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience

    Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience

    June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…

  • Electrifying Connections: A Celebration of Legacy, A Vision for the Future

    Electrifying Connections: A Celebration of Legacy, A Vision for the Future

    June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections.   The energy and… Read More…


Changing Scene

  • Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity

    Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity

    June 13, 2025 Eaton, and Siemens Energy have announced a fast-track approach to building data centers with integrated onsite power. They will address urgent market needs by offering reliable grid-independent energy supplies and standardized modular systems to facilitate swift data center construction and deployment. The collaboration will enable simultaneous construction of data centers and associated… Read More…

  • Latest Social Media Challenge Puts Students at Risk of Electrical Shock

    Latest Social Media Challenge Puts Students at Risk of Electrical Shock

    June 13, 2025 The Electrical Safety Authority (ESA) is warning Ontarians that a shocking new social media trend is putting students at risk of serious electrical injury including shock, burns or even fires. A pair of dangerous social media trends have been gaining interest from students. One has kids “challenging” each other to stick a… Read More…

  • Plan Group Announce New VP of Electrical

    Plan Group Announce New VP of Electrical

    June 13, 2025 Plan Group are proud to announce the promotion of Dave Scott as Vice President of Electrical. Dave has been a key part of Plan Group’s success for the last 16 years, leading with drive, accountability, and a deep understanding of what it takes to get the job done right. He will now… Read More…

  • Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26

    Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26

    June 13, 2025 On Monday, May 26, 2025, Electro-Federation Canada (EFC) held its Annual General Meeting, which included an update on key initiatives, the welcoming of a new Chair, and the election of the 2025-2026 Board of Directors. EFC President & CEO Carol McGlogan shared key highlights from the past year and provided a summary of the… Read More…