Electrical Contractors’ Salaries by Company Size, 2014-2015

May 5, 2023 Elle Bremmer As one of the largest distributors of renewable energy solutions in Canada, Guillevin Greentech is proud to offer its customers cost-effective solutions with its solar streetlights. This superior technology provides municipalities with better lighting and ease of installation. Le monde de l’électricité en ligne spoke with Guillevin Greentech’s experts, Ndiaga…
When working with electricity, no hazard should be overlooked. According to specialists, there is no situation where electricity represents a lesser risk for workers. If the power is on, there is danger.
In last week’s issue, you had the opportunity to answer our questions about the Code and best practices. Here are the answers to those questions.
Ever notice that sometimes folks act differently around wealthy people? I think it’s because (whether we admit it or not) most of us want rich people to like and accept us.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
May 5, 2023 Elle Bremmer As one of the largest distributors of renewable energy solutions in Canada, Guillevin Greentech is proud to offer its customers cost-effective solutions with its solar streetlights. This superior technology provides municipalities with better lighting and ease of installation. Le monde de l’électricité en ligne spoke with Guillevin Greentech’s experts, Ndiaga…
When working with electricity, no hazard should be overlooked. According to specialists, there is no situation where electricity represents a lesser risk for workers. If the power is on, there is danger.
In last week’s issue, you had the opportunity to answer our questions about the Code and best practices. Here are the answers to those questions.
Ever notice that sometimes folks act differently around wealthy people? I think it’s because (whether we admit it or not) most of us want rich people to like and accept us.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
May 5, 2023 Elle Bremmer As one of the largest distributors of renewable energy solutions in Canada, Guillevin Greentech is proud to offer its customers cost-effective solutions with its solar streetlights. This superior technology provides municipalities with better lighting and ease of installation. Le monde de l’électricité en ligne spoke with Guillevin Greentech’s experts, Ndiaga…
When working with electricity, no hazard should be overlooked. According to specialists, there is no situation where electricity represents a lesser risk for workers. If the power is on, there is danger.
In last week’s issue, you had the opportunity to answer our questions about the Code and best practices. Here are the answers to those questions.
Ever notice that sometimes folks act differently around wealthy people? I think it’s because (whether we admit it or not) most of us want rich people to like and accept us.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
May 26, 2025 The Global EV Outlook is an annual publication that reports on recent developments in electric mobility around the world. It is developed with the support of members of the Electric Vehicles Initiative (EVI). The report draws on the latest data to assess trends in electric vehicle deployment, demand for their batteries and… Read More…
Sales Outsource Solutions (SOS) held the third edition of their SOS Show on April 10th at the Pearson Convention Centre. The show had a highly concentrated feel… Read More…
May 19, 2025 As the EV charging industry is poised for profitability, network operators still face many challenges. But what are their biggest challenges, are they ready to scale up to support their business growth, and how will they provide drivers with a better charging experience in 2025. This report answers these questions and more,… Read More…
May 19, 2025 ELECTRI has sponsored a research project to create a playbook for electrical contractors that will help you: Unpaid rework refers to activities in the field (including prefabrication) that have to be done more than once, or activities that remove work previously installed as part of the project, where no change order has… Read More…
May 26, 2025 Siemens will invest CAD $150 million over five years to establish a Global AI Manufacturing Technologies Research and Development (R&D) Center for Battery Production in Canada. The new R&D center, located initially at Siemens Canada’s head office in Oakville, as well as in Toronto and Kitchener-Waterloo, Ontario, will focus on developing cutting-edge AI manufacturing technologies with an initial emphasis… Read More…
May 26, 2025 Honda is postponing its plan to invest in a comprehensive EV supply chain in Ontario. The CBC reported that the investment is being push back by two years. “Due to the recent slowdown of the EV market, Honda Motor has announced an approximate two-year postponement of the comprehensive value chain investment project in Canada…. Read More…
May 26, 2025 George McClean, former President of Sonepar Canada, has decided to leave Sonepar for an opportunity outside of the electrical industry. Serge Leblanc, current President of Lumen Canada, has been appointed interim President of Sonepar Canada. Leblanc will manage both responsibilities until a successor is named. Leblanc joined Lumen in 1997 and has… Read More…
May 26, 2025 On Monday, May 26, the Ontario Building and Construction Tradeswomen (OBCT), will host its first-ever Advocacy Day at Queen’s Park. Tradeswomen from across the province will gather to meet with Members of Provincial Parliament, including Minister of Labour David Piccini, to advocate for progress in the skilled trades for tradeswomen. OBCT’s top priorities include:… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.