Survey Says: What Products Consulting Engineers Specify
Related Articles
New Report: Preparing Alberta’s Buildings for Severe Weather
April 13, 2025 Alberta is facing more severe weather events, with rising temperatures, wildfires, and more frequent extreme storms threatening homes and businesses. Our report, Preparing Alberta’s Buildings for Severe Weather−written in partnership with the Alberta Ecotrust Retrofit Accelerator program−highlights the need for deep retrofits to ensure the province’s buildings can withstand these changing conditions. Four…
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits
Although Section 16 is a general section of the Code, the Scope applies specifically to remote control, signal circuits, Class 2 power and data communication circuits connecting power sourcing equipment and powered devices, and voltage or energy limited circuits installed in accordance with the requirements of the Code, unless amended or modified by other sections.
Lethbridge College launches Intro to Trades dual credit program
February 9, 2023 Two dozen southern Alberta high school students are getting a better understanding of the trades – as well as potential future careers – by participating in Lethbridge College’s Introduction to the Trades Dual Credit Pathway Program. Presented in partnership with Career Transitions and area school divisions, the newly developed, 15-week course highlights all trades…
An Electrician’s Guide to Evolving with Technology
I am asked this question quite frequently, as I’m not what most consider to be a “typical electrician.” For me, it was a rather pragmatic decision. I had been working in a factory as a production worker, doing the same boring thing 800 times a day.
Adapting to Change: The Evolution of Technology and Its Impact on the Workplace
The evolution of technology has all companies thinking about what they need to do to adapt and stay ahead of the curve.
Guide to the Canadian Electrical Code, Part I
Section 26 is a general section of the code and applies to the installation of all electrical equipment. Appendix B contains important additional helpful notes. This section is divided into a number of parts, with the general rules 26-002 to 26-014 applying to all electrical equipment and additional parts for specific types of equipment.
New Report: Preparing Alberta’s Buildings for Severe Weather
April 13, 2025 Alberta is facing more severe weather events, with rising temperatures, wildfires, and more frequent extreme storms threatening homes and businesses. Our report, Preparing Alberta’s Buildings for Severe Weather−written in partnership with the Alberta Ecotrust Retrofit Accelerator program−highlights the need for deep retrofits to ensure the province’s buildings can withstand these changing conditions. Four…
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits
Although Section 16 is a general section of the Code, the Scope applies specifically to remote control, signal circuits, Class 2 power and data communication circuits connecting power sourcing equipment and powered devices, and voltage or energy limited circuits installed in accordance with the requirements of the Code, unless amended or modified by other sections.
Lethbridge College launches Intro to Trades dual credit program
February 9, 2023 Two dozen southern Alberta high school students are getting a better understanding of the trades – as well as potential future careers – by participating in Lethbridge College’s Introduction to the Trades Dual Credit Pathway Program. Presented in partnership with Career Transitions and area school divisions, the newly developed, 15-week course highlights all trades…
An Electrician’s Guide to Evolving with Technology
I am asked this question quite frequently, as I’m not what most consider to be a “typical electrician.” For me, it was a rather pragmatic decision. I had been working in a factory as a production worker, doing the same boring thing 800 times a day.
Adapting to Change: The Evolution of Technology and Its Impact on the Workplace
The evolution of technology has all companies thinking about what they need to do to adapt and stay ahead of the curve.
Guide to the Canadian Electrical Code, Part I
Section 26 is a general section of the code and applies to the installation of all electrical equipment. Appendix B contains important additional helpful notes. This section is divided into a number of parts, with the general rules 26-002 to 26-014 applying to all electrical equipment and additional parts for specific types of equipment.
New Report: Preparing Alberta’s Buildings for Severe Weather
April 13, 2025 Alberta is facing more severe weather events, with rising temperatures, wildfires, and more frequent extreme storms threatening homes and businesses. Our report, Preparing Alberta’s Buildings for Severe Weather−written in partnership with the Alberta Ecotrust Retrofit Accelerator program−highlights the need for deep retrofits to ensure the province’s buildings can withstand these changing conditions. Four…
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits
Although Section 16 is a general section of the Code, the Scope applies specifically to remote control, signal circuits, Class 2 power and data communication circuits connecting power sourcing equipment and powered devices, and voltage or energy limited circuits installed in accordance with the requirements of the Code, unless amended or modified by other sections.
Lethbridge College launches Intro to Trades dual credit program
February 9, 2023 Two dozen southern Alberta high school students are getting a better understanding of the trades – as well as potential future careers – by participating in Lethbridge College’s Introduction to the Trades Dual Credit Pathway Program. Presented in partnership with Career Transitions and area school divisions, the newly developed, 15-week course highlights all trades…
An Electrician’s Guide to Evolving with Technology
I am asked this question quite frequently, as I’m not what most consider to be a “typical electrician.” For me, it was a rather pragmatic decision. I had been working in a factory as a production worker, doing the same boring thing 800 times a day.
Adapting to Change: The Evolution of Technology and Its Impact on the Workplace
The evolution of technology has all companies thinking about what they need to do to adapt and stay ahead of the curve.
Guide to the Canadian Electrical Code, Part I
Section 26 is a general section of the code and applies to the installation of all electrical equipment. Appendix B contains important additional helpful notes. This section is divided into a number of parts, with the general rules 26-002 to 26-014 applying to all electrical equipment and additional parts for specific types of equipment.
Latest Articles
-
Virtual Training for Electricians Available at Many IBEW Canada Training Centres Across the Country
June 23, 2025 Virtual Training for Electricians (VET) is now available at many IBEW Canada Training Centres nationwide — and more are coming online soon! Whether your centre is already equipped or in the process of setting up, this is a game-changing opportunity you won’t want to miss. Need assistance? Contact the NETCO team. What… Read More…
-
Designing for Demand: The Role of Transformers in a Resilient EV Future
June 23, 2025 Transformers in the EV Charging Boom: Are We Ready for the Load? As electric vehicles (EVs) continue their rapid rise, one question looms over the energy sector, municipalities, and developers alike: Is our infrastructure truly ready for the surge in demand? From city streets to highway rest stops, new EV chargers are… Read More…
-
The Time is Now: An Industrial Energy Efficiency Action Plan
June 23, 2025 In a whitepaper released on June third, ABB has set out the scale of the challenge facing the global industrial sector and emphasizes the critical role of industrial energy efficiency in meeting rising energy demand while strengthening energy security & affordability and driving industrial competitiveness. With 45% of the world’s electricity converted… Read More…
-
Multi-Family Construction Intentions Weigh Down Residential Sector
June 23, 2025 In April, the total value of building permits issued in Canada decreased by $829.6 million (-6.6%) to $11.7 billion. British Columbia (-$1.2 billion) led this decrease in construction intentions, which was mitigated by Ontario (+$299.3 million). On a constant dollar basis (2023=100), the total value of building permits issued in April fell by 6.6% from the previous… Read More…
Changing Scene
-
Stanpro Makes Significant Donation to Help Haven on the Queensway Move to a Larger Facility
June 23, 2025 In an effort to provide essential resources to individuals and families in need in the GTA, EFC members once again stepped up to support Haven on the Queensway, a community resource centre in Etobicoke, ON. Earlier this year, Haven secured a new, larger location nearby its existing facility to meet growing demand… Read More…
-
Metalumen Manufacturing, Inc. Announces NRG INTENSI-T as New Sales Agency in Quebec
June 23, 2025 Metalumen Manufacturing, Inc. is pleased to welcome NRG INTENSI-T as its new sales agency for the Quebec region. This partnership strengthens regional support and reflects a shared commitment to innovation and excellence. Since 1977, Metalumen has been designing, engineering, and manufacturing lighting products that blend functionality with design, offering luminaires tailored to… Read More…
-
IDEAL Electrical™ and BILT® Make it Easier to Learn Conduit Bending
June 23, 2025 Conduit bending – one of the hardest skills for professional electricians to master – is now easier than ever to learn, thanks to a first-of-its kind partnership between BILT, an app that has revolutionized step-by-step interactive instructions for DIYers and IDEAL Electrical, a 108-year old manufacturer of electrical tools and supplies for professional electricians…. Read More…
-
Introducing the New WAGO App: Your Jobsite Sidekick
WAGO at your fingertips — scan the QR to get the app now. Stay connected with WAGO wherever you go. Download the WAGO App to access product details, documentation, configuration tools, as well as local distributors — all from your mobile device. Scan the QR code to get started on the App Store or Google… Read More…
