Lighting the Way for Our Aging Eyes

Aging Eyes

People 65 and older are North America’s fastest growing demographic group. Along with the rapid growth of this category comes a host of new products, services, and outreach activities, says the Illuminating Engineering Society (IES). One of these is the need for home lighting designed especially for the aging eye. Here’s a primer, courtesy of IES’ Lighting Your Way to Better Vision.

The issue

As we age, even healthy eyes become more sensitive to glare and require higher contrasts and illumination levels. They also take longer to adjust to changes in light levels. The need for higher light levels means greater control of sources of light is especially important.

Compensating for our aging eyes

Installing these three types of lighting can help us adjust to changing light levels, create higher levels of light, and minimize glare:
• ambient lighting. Install fixtures that are designed to conceal the light bulb/tube from view or have a diffuser to diminish the brightness of the bulb/tube to control glare. Lighting directed to the ceiling and walls will provide ambient light. Options include fixtures installed out of sight, a light valance, wall wash fixtures, or a torchiere.
• task lighting: fixtures or portable table/floor lamps with adjustable lighting levels provide higher light levels in a specific area. Age-related changes within the eye restrict the light coming in and absorb the light, so more light is needed to compensate.
• glare-free light. Light scatters within the eye, causing greater sensitivity to glare and less ability to see subtle details at lower light levels.
Indoor modifications

When installing or upgrading lighting, introduce multiple light levels, including ambient and task lighting.
Suggestions include:
• all rooms — switches and dimming controls that are easy to reach and use
• kitchen and bathroom — undercabinet fixtures, over-the-sink fixtures, strip lighting above cabinets to reflect light off the ceiling, ceiling fixtures
• hallways and areas used at night — illuminated light switches
Place enough electrical boxes to accommodate lots of task lighting and situate them in a way that reduces the slip and trip hazards posed by trailing cords.
Outdoor modifications
Install or upgrade lighting that illuminates surface and elevation changes, and makes movement easier. For example:
• pathway lighting to illuminate steps and level changes, and compensate for porch lights, which can cause glare, and landscaping, which can block mounted lighting and create shadows.
• illuminated house numbers.

Pay special attention to exterior flights of stairs. Lighting mounted at the head of the stairs may not illuminate the entire flight. Concealed rope-lights attached to the underside of the stair rail, or solar powered or electrically powered step lights can provide additional light on stair treads. 

According to IES, the presence of “quality environmental lighting can enhance the visual experience and maintain productivity for a lifetime.” For more lighting tips, download the IES guidelines: http://www.ies.org/PDF/Education/LightingForAgingEye.pdf.

 

Related Articles


Latest Articles

  • Code Quiz: Section 26 – Installation of Electrical Equipment

    Code Quiz: Section 26 – Installation of Electrical Equipment

    April 7, 2025 By Bill Burr Section 26 – Installation of Electrical Equipment Receptacles Question: Rule 26-706 specifies that all receptacles of CSA configuration 5-15R and 5-20R installed in: …must have a particular feature, what is this feature? Source: CSA C22.1:24, Canadian Electrical Code, Part 1 – Safety Standard for Electrical Installations. © 2021 Canadian… Read More…

  • Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 32

    Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 32

    Section 32, as outlined in rule 32 -000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, and protection, of fire alarm systems… Read More…

  • Alberta Municipalities EV Charging Installation Rebate

    Alberta Municipalities EV Charging Installation Rebate

    April 4, 2025 Alberta Municipalities are proud to provide financial rebates for applicants to purchase and install electric vehicle charging stations in Alberta as part of the Electric Vehicle Charging Program (EVCP), funded by Natural Resources Canada (NRCan) & Alberta Municipalities.  The funding will cover up to 46% of your total project cost, which can… Read More…

  • Industry Legend Bill Smith Retires

    Industry Legend Bill Smith Retires

    April 4, 2025 By Electro-Federation Canada On March 25, Electrozad, a Sonepar Company, hosted a special retirement reception at Caesars Windsor for industry titan Bill Smith who marked an incredible 50-year career with the company.  The reception was held in the elegant Caesars Ballroom, which featured an array of food stations and elegant decor. In… Read More…


Changing Scene

  • NSAA Fee Change Effective April 1, 2025

    NSAA Fee Change Effective April 1, 2025

    As of April 1, 2025, the Nova Scotia Apprenticeship Agency’s fees have changed due to the 1% reduction in HST in Nova Scotia. NSAA noted on their website that due to the number of references across various pages, you may still come across old fee amounts as they work through updating their website. Here is… Read More…

  • Nominations Open for 2024 NETCO Leadership Excellence Award

    Nominations Open for 2024 NETCO Leadership Excellence Award

    Established in 2016, the NETCO Leadership Excellence award honours an industry training professional for his/her role for the success and their outstanding contributions to apprenticeship training and continuing electrical training. Read More…

  • Munded Partners with Kane Test Equipment in Atlantic Canada

    Munded Partners with Kane Test Equipment in Atlantic Canada

    April 4, 2025 Munden Enterprises has announced a partnership with Kane Test Equipment to bring their test and measurement solutions to Atlantic Canada. “We are now excited to announce a new and promising partnership with Kane Test Equipment. Kane Test Equipment brings innovative solutions that align with our dedication to providing the best tools for… Read More…

  • Nedco Announces Western Canadian Wire & Cable Sales Manager

    Nedco Announces Western Canadian Wire & Cable Sales Manager

    April 4, 2025 Don Blake has joined Nedco as their Western Canadian Wire & Cable Sales Manager. “With over 20 years of experience in the Wire & Cable industry, Don brings a wealth of knowledge and expertise to our Nedco West team,” said the company on LinkedIn. “His focus will be on expanding our product… Read More…