Market Report on DC Distribution Networks

DC Distribution

The market for direct current (DC) distribution networks encompasses several disparate opportunities — telecommunications towers, data centres, grid-tied commercial buildings, and off-grid military networks — that revolve around different market assumptions, dynamics, and drivers. The industry is currently focused on medium-voltage DC distribution networks — systems that are mostly concentrated on the data centre market segment, but which can also apply to commercial buildings.

A heated debate continues about the advantages and disadvantages of DC. The majority of progress in developing DC-based technologies has occurred at either the high-voltage (more than 1,000V) or low-voltage (less than 100V) level. Since microgrids and building-scale nanogrids typically operate at medium voltage (roughly 380V–400V), much work needs to be done to bridge this voltage innovation gap. Another challenge facing DC distribution networks lies with the need for standards and open grid architectures that can help integrate the increasing diversity of resources. Yet, there is momentum at the distribution level of electricity service to diversify power offerings and pursue hybrid solutions that incorporate a growing proportion of DC. According to Navigant Research, implementation revenue in the global DC distribution network market is expected to grow from $2.8 billion in 2015 to $5.1 billion in 2024 under a base scenario.

This Navigant Research report analyzes the global market for DC distribution networks in four key segments: off-grid/bad grid telecommunications, data centres, commercial building grids, and off-grid military applications. The study provides an analysis of the market issues, including opportunities, drivers, and implementation challenges, associated with DC distribution networks. Global market forecasts for capacity and implementation revenue, broken out by segment, region, and scenario, extend through 2024. The report also examines the key technologies related to DC distribution networks, as well as the competitive landscape.

Key questions addressed:

• What are the efficiency and control advantages of direct current (DC)?
• What applications of DC power make sense today? Tomorrow?
• What efforts are being made to create new standards for DC medium-voltage products?
• Which segments are leading this market?
• Which companies are the lead pioneers with DC technologies?
• How does DC fit in with the current push related to microgrids for resiliency?
• What unique safety issues need to be addressed in order for DC to become fully commercialized?

Find out more: www.navigantresearch.com/research/energy-technologies/microgrids-energy-technologies


Navigant’s Microgrids Research Service focuses on alternative distributed energy resource (DER) networks and related platforms that add enhanced resilience, redundancy, and security to the electrical distribution system. The service features research and analysis covering microgrids, nanogrids, virtual power plants, and direct current distribution networks, along with an in-depth examination of deployment strategies, enabling technologies, policy and regulatory factors, business and financing models, and applications for these networks in various industry verticals. The research includes a comprehensive strategic analysis of the market landscape in addition to detailed market forecasts, segmented by technology, world region, and application area.

Related Articles


Latest Articles

  • Hazardous Environment vs. Intrinsically Safe Sensors: Understanding the Differences

    Hazardous Environment vs. Intrinsically Safe Sensors: Understanding the Differences

    May 5, 2025 Sensors designed for industrial applications often face harsh conditions, including extreme temperatures, high humidity, exposure to chemicals, and the presence of combustible gases or dust. Two common classifications for sensors used in such environments are hazardous environment sensors and intrinsically safe sensors. While they share some overlap, they serve different purposes and… Read More…

  • The Wild and Wonderful of Thermal by FLIR – How Thermal Imaging is Augmenting More Than Just Cameras

    The Wild and Wonderful of Thermal by FLIR – How Thermal Imaging is Augmenting More Than Just Cameras

    May 5, 2025 By Krystie Johnston Teledyne FLIR OEM launched their Thermal by FLIR about six years ago, to expand support for original equipment manufacturers (OEMs) who integrate FLIR thermal camera technology into their products. Since then, these collaborations have taken thermal into completely new spaces. Mike Walters, Vice President of Emerging Product Management at FLIR… Read More…

  • Ontario Leads Residential Sector Increase in February Construction Investment

    Ontario Leads Residential Sector Increase in February Construction Investment

    May 5, 2025 Overall, investment in building construction rose 1.5% (+$331.7 million) to $22.4 billion in February, with gains being recorded across all components. The residential sector increased 1.8% to $15.7 billion, while the non-residential sector was up 0.8% to $6.8 billion. Year over year, investment in building construction grew 8.9% in February. On a constant dollar basis (2017=100), investment in building construction… Read More…

  • MCEE 2025 Marks Big Return to the Palais des congrès

    MCEE 2025 Marks Big Return to the Palais des congrès

    May 4, 2025 By Electro-Federation Canada Canada’s largest Mechanical, Plumbing, Hydronics, HVAC, Electrical and Lighting Expo did not disappoint. On April 24-25, more than 6,000 attendees flocked to the Palais des congrès in the heart of Montreal to attend the Mechanical, Conditioning, Electrical, and Equipment (MCEE) trade show to see the latest products, learn about… Read More…


Changing Scene

  • Luminis Wins Red Dot Award for Pelican

    Luminis Wins Red Dot Award for Pelican

    May 12, 2025 Luminis has announced its Pelican family has received a Red Dot Design Award for Product Design. Dating back to 1955, the Red Dot Design Award is one of the world’s largest design competitions. Every year, the Red Dot Award: Product Design sets out to find the year’s best products. The Red Dot… Read More…

  • Fieldwire by Hilti and BoxLock Introduce Real-Time Integration for Lockout Tagout on Single-Line Drawings

    Fieldwire by Hilti and BoxLock Introduce Real-Time Integration for Lockout Tagout on Single-Line Drawings

    May 12, 2025 Fieldwire by Hilti and BoxLock have announced an innovative first-to-market integration that provides real-time Lockout/Tagout (LOTO) status directly onto electrical single-line drawings.   The new integration, officially being launched in tandem with the industry’s annual Construction Safety Week, allows Fieldwire users to assign LOTO tasks directly to single-line electrical diagrams. Each task is seamlessly… Read More…

  • ESA Board of Directors Recruiting for a Director Representing Ontario Licensed Electrical Contractors

    ESA Board of Directors Recruiting for a Director Representing Ontario Licensed Electrical Contractors

    May 12, 2025 The Electrical Safety Authority’s (ESA) mission is to improve electrical safety for the well-being of the people of Ontario. With the unprecedented changes in technology and the electrification transformation underway in Ontario, it’s an exciting time to help guide ESA, a delegated administrative authority (DAA), as it evolves its role as a… Read More…

  • EFC’s Women’s Network Ontario Region Unveils New Committee

    EFC’s Women’s Network Ontario Region Unveils New Committee

    May 12, 2025 EFC’s Women’s Network Ontario Region is pleased to unveil a new committee to support its numerous initiatives to support women in the electrical industry. The Women’s Network originated in 2018 to offer a dynamic program specifically tailored to women. Earlier this year, EFC updated its three core pillars to better reflect the… Read More…