Where Electrical Technologists and Technicians Work
April 4 2016
Among nine categories, manufacturing employs one in 3, twice as much as the next highest category.
Source: Service Canada: www.servicecanada.gc.ca.
Related Articles
Where Innovation and Safety Intersect: GUV Devices in Canada
The electrical market is at the helm of innovation — from robotics and automation products that support advanced manufacturing to smart technology in homes and businesses, our industry leads innovation and competitiveness in Canada.
EFC Tariff Survey Confirms Significant Impact
March 3, 2025 In response to the proposed tariffs on Canadian goods, EFC conducted a survey to better understand and quantify the potential impact. The proposed tariffs have raised concerns across various industries, including Canada’s electrical and automation sector. With 85 member organizations represented (approximately 33% of membership), the results revealed tariffs on Canadian goods…
IEEE 1584.1 IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584
IEEE 1584.1 Guide for Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584 provides detailed guidance on how to complete an arc flash hazard incident energy analysis study and recommended content for the P.Eng. authenticated report.
CCA Bulletin: Managing Tariff Risks in Construction Projects
April 13, 2025 This bulletin was prepared by select members of the Canadian Construction Association’s (CCA) General Contractors National Advisory Council. Its purpose is to assess the potential impacts of tariffs and counter-tariffs on general contractors in Canada focusing specifically on: In both areas, the bulletin explores both upstream and downstream impacts – examining how…
Rigid PVC Conduit vs. ENT in High-Rise and Multi-Use Applications
February 7, 2025 By Phil Crangi Choosing the right high-rise construction conduit can significantly impact project efficiency and costs. While rigid PVC (Polyvinyl Chloride) conduit may have a lower upfront cost, ENT (Electrical Nonmetallic Tubing) offers more significant advantages due to its long-term labor savings and installation efficiency. ENT and fittings form an integrated system…
Where Innovation and Safety Intersect: GUV Devices in Canada
The electrical market is at the helm of innovation — from robotics and automation products that support advanced manufacturing to smart technology in homes and businesses, our industry leads innovation and competitiveness in Canada.
EFC Tariff Survey Confirms Significant Impact
March 3, 2025 In response to the proposed tariffs on Canadian goods, EFC conducted a survey to better understand and quantify the potential impact. The proposed tariffs have raised concerns across various industries, including Canada’s electrical and automation sector. With 85 member organizations represented (approximately 33% of membership), the results revealed tariffs on Canadian goods…
IEEE 1584.1 IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584
IEEE 1584.1 Guide for Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584 provides detailed guidance on how to complete an arc flash hazard incident energy analysis study and recommended content for the P.Eng. authenticated report.
CCA Bulletin: Managing Tariff Risks in Construction Projects
April 13, 2025 This bulletin was prepared by select members of the Canadian Construction Association’s (CCA) General Contractors National Advisory Council. Its purpose is to assess the potential impacts of tariffs and counter-tariffs on general contractors in Canada focusing specifically on: In both areas, the bulletin explores both upstream and downstream impacts – examining how…
Rigid PVC Conduit vs. ENT in High-Rise and Multi-Use Applications
February 7, 2025 By Phil Crangi Choosing the right high-rise construction conduit can significantly impact project efficiency and costs. While rigid PVC (Polyvinyl Chloride) conduit may have a lower upfront cost, ENT (Electrical Nonmetallic Tubing) offers more significant advantages due to its long-term labor savings and installation efficiency. ENT and fittings form an integrated system…
Where Innovation and Safety Intersect: GUV Devices in Canada
The electrical market is at the helm of innovation — from robotics and automation products that support advanced manufacturing to smart technology in homes and businesses, our industry leads innovation and competitiveness in Canada.
EFC Tariff Survey Confirms Significant Impact
March 3, 2025 In response to the proposed tariffs on Canadian goods, EFC conducted a survey to better understand and quantify the potential impact. The proposed tariffs have raised concerns across various industries, including Canada’s electrical and automation sector. With 85 member organizations represented (approximately 33% of membership), the results revealed tariffs on Canadian goods…
IEEE 1584.1 IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584
IEEE 1584.1 Guide for Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584 provides detailed guidance on how to complete an arc flash hazard incident energy analysis study and recommended content for the P.Eng. authenticated report.
CCA Bulletin: Managing Tariff Risks in Construction Projects
April 13, 2025 This bulletin was prepared by select members of the Canadian Construction Association’s (CCA) General Contractors National Advisory Council. Its purpose is to assess the potential impacts of tariffs and counter-tariffs on general contractors in Canada focusing specifically on: In both areas, the bulletin explores both upstream and downstream impacts – examining how…
Rigid PVC Conduit vs. ENT in High-Rise and Multi-Use Applications
February 7, 2025 By Phil Crangi Choosing the right high-rise construction conduit can significantly impact project efficiency and costs. While rigid PVC (Polyvinyl Chloride) conduit may have a lower upfront cost, ENT (Electrical Nonmetallic Tubing) offers more significant advantages due to its long-term labor savings and installation efficiency. ENT and fittings form an integrated system…
Latest Articles
-
New Gender Equality Report Card Shows Most Jurisdictions are Failing
November 10, 2025 The Canadian Coalition of Women in Engineering, Science, Trade and Technology (CCWESTT) has just released the first Gender Equality Report Card, which provides comprehensive, evidence-based insight into the state of gender equality across Canada’s provinces and territories in science, engineering, trades and technology (SETT) workplaces. The report draws on 18 participatory research… Read More…
-
![Guide to the Canadian Electrical Code, Part 1[i] 26th Edition – A Road Map: Section 46](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i] 26th Edition – A Road Map: Section 46
November 10, 2025 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendices B and… Read More…
-
Calgary Project Transforms Office Building into Energy Efficient Housing
November 10, 2025 More than 200 Calgarians now have new homes in Downtown West as the former Dominion Centre office reopens as Dominion Civic Apartments. The former Dominion Centre has been transformed from 100,000 square feet of vacant office space to an energy efficient and climate resilient residential building with 132 modern rental suites. The… Read More…
-
Remembering Katy Shebath, A Kind And Thoughtful Leader
November 10, 2025 By Stanpro Katy Shebath played a critical role alongside her brother, David Nathaniel, throughout the last 32 years of Standard Products journey. She remains, with David, the heart and soul of this company. A Driving Force Behind STANDARD When Katy joined STANDARD in 1986, she took on the administration of the company. At… Read More…
Changing Scene
-
A Groundbreaking Return to the Sir Robert Peel Centre for Ellis Don
November 10, 2025 In a full circle moment, EllisDon has broken ground on the Sir Robert Peel Centre Redevelopment Project, a facility originally constructed by EllisDon in the 1980s. Now, this milestone marks the beginning of a new chapter in Peel Region’s public safety infrastructure. The redevelopment will deliver a modern, high-performance policing hub designed… Read More…
-
BCCA Response to Federal Budget 2025
November 10, 2025 The BCCA welcomes the federal government’s investments into construction and infrastructure in Budget 2025. The budget includes increasing Canada Infrastructure Bank funding by $10 billion and funding the new Major Projects Office to the tune of $213.8 million over 5 years. The BCCA also supports the government’s investment into the construction workforce,… Read More…
-
Government of Canada Releases Budget 2025
November 10. 2025 Canada faces a rapidly changing and increasingly uncertain world. The rules-based international order and the trading system that powered Canada’s prosperity for decades are being reshaped – hurting companies, displacing workers, causing major disruption and upheaval for Canadians. In the face of global uncertainty, Canada’s new government is focused on what we… Read More…
-
CME: Budget 2025 Delivers Key Gains for Manufacturers Facing Tariff Pressures, but Canada Still Needs Deeper Competitiveness Reforms
November 10, 2025 Canadian Manufacturers & Exporters (CME) applauds Budget 2025 for recognizing the serious challenges facing Canada’s economy amid ongoing U.S. trade actions and for introducing new incentives to spur investment. “This budget takes meaningful steps to support manufacturers under pressure and acknowledges the critical role our sector plays in Canada’s economic future,” said… Read More…
