Copper Spot Prices 2009-2014

Estimating is the foundation of any successful electrical contracting business. It is often overlooked though, due to its rapid turnaround nature and lack of direct revenue stream for contractors. However, proper investment in estimating is the key to business development, expansion and longevity.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
Canada’s clean energy sector employed 298,000 Canadians as of 2017. What’s more, it’s growing in value by 4.8% every year — a third faster than Canada’s economy as a whole (3.6%).
April 14, 2025 Today’s workplaces are expanding beyond the four walls of an office. As technology continues to evolve, employees are looking for new and alternative workspaces to inspire creativity and increase productivity. This includes taking their work to outdoor spaces. Bringing technology to outdoor spaces has become a challenge for facility managers and property…
March 3, 2023 Work is underway to engage licensed contractors as they build out their Licensing journey with the Ursa system. Follow the links below to participate. In early 2022 TSBC began an initiative to learn about your experiences and challenges with licensing, and listen to your ideas and priorities around improving the licensing function. Go…
Estimating is the foundation of any successful electrical contracting business. It is often overlooked though, due to its rapid turnaround nature and lack of direct revenue stream for contractors. However, proper investment in estimating is the key to business development, expansion and longevity.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
Canada’s clean energy sector employed 298,000 Canadians as of 2017. What’s more, it’s growing in value by 4.8% every year — a third faster than Canada’s economy as a whole (3.6%).
April 14, 2025 Today’s workplaces are expanding beyond the four walls of an office. As technology continues to evolve, employees are looking for new and alternative workspaces to inspire creativity and increase productivity. This includes taking their work to outdoor spaces. Bringing technology to outdoor spaces has become a challenge for facility managers and property…
March 3, 2023 Work is underway to engage licensed contractors as they build out their Licensing journey with the Ursa system. Follow the links below to participate. In early 2022 TSBC began an initiative to learn about your experiences and challenges with licensing, and listen to your ideas and priorities around improving the licensing function. Go…
Estimating is the foundation of any successful electrical contracting business. It is often overlooked though, due to its rapid turnaround nature and lack of direct revenue stream for contractors. However, proper investment in estimating is the key to business development, expansion and longevity.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
Canada’s clean energy sector employed 298,000 Canadians as of 2017. What’s more, it’s growing in value by 4.8% every year — a third faster than Canada’s economy as a whole (3.6%).
April 14, 2025 Today’s workplaces are expanding beyond the four walls of an office. As technology continues to evolve, employees are looking for new and alternative workspaces to inspire creativity and increase productivity. This includes taking their work to outdoor spaces. Bringing technology to outdoor spaces has become a challenge for facility managers and property…
March 3, 2023 Work is underway to engage licensed contractors as they build out their Licensing journey with the Ursa system. Follow the links below to participate. In early 2022 TSBC began an initiative to learn about your experiences and challenges with licensing, and listen to your ideas and priorities around improving the licensing function. Go…
June 26, 2025 50 Years in Canada and a New Strategic Location Reinforces Weidmüller’s Presence and Contributions in Canadian Industry By: Adora Hartley June has marked some major milestones for Weidmüller Canada, having recently celebrated 50 years of operation in Canada, in addition to 175 years of developing innovative solutions that have helped shape industries… Read More…
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. Read More…
June 30, 2025 Canada Mortgage and Housing Corporation (CMHC) released new estimates on Canada’s housing supply gaps showing that a return to housing affordability levels last seen in 2019 will require between 430k and 480k new housing units be built annually over the next decade. This is an approximate doubling of the current pace of home construction in Canada. New this year,… Read More…
June 30, 2025 In the face of growing pressure to build more, faster, nine in 10 Canadian construction leaders agree that the industry must move quickly to embrace new and advanced technologies, with most saying digital tools are already starting to boost their productivity, finds a new KPMG in Canada report on digital maturity in the construction industry. “It is… Read More…
June 30, 2025 ABB has been ranked 14th in TIME’s “World’s Most Sustainable Companies 2025” and third in Switzerland across all industries. TIME and Statista assessed over 5,000 of the world’s largest and most influential companies, considering factors such as revenue, market capitalization, and public prominence. The top 500 companies from 35 countries and 21 industries were… Read More…
June 25, 2025 The governments of Canada and Quebec, together with Desjardins, have announced the construction of 1,000 new affordable housing units over the next three years. These housing units will be created as part of the Desjardins Affordable Housing Initiative, a partnership launched in 2022 that will now enable the delivery of over 3,000 affordable housing units… Read More…
June 30, 2025 The Canada Infrastructure Bank (CIB) and Dream Industrial Real Estate Investment Trust have finalized a $50 million loan to fund commercial property retrofits related to energy efficiency savings and emissions reductions at 34 warehouses in Alberta, Ontario and Quebec. With buildings currently accounting for 18% of Canada’s total emissions, investments from the… Read More…
June 25, 2025 In a Canadian first, the Province and BC Hydro have launched a pioneering pilot project in Vancouver that has the potential to set new standards for supporting growing housing priorities and densification in Canada. Designed to support the transition from single-family homes to multi-unit residences, the initiative is exploring how full electrification –… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.