Bonus Value by Job Title
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
The Manitoba government invites the public to participate in the development of the Apprenticeship and Certification Board five-year strategic plan and share its views on the province’s apprenticeship and certification system and workforce development, Advanced Education, Skills and Immigration Minister Jon Reyes announced today.
December 2, 2022 You saw him take the crown in the 2021 IDEAL National Championship and place in the top 5 at the 2022 IDEAL National Championship finals, now hear his story. When Anthony Kovalchick started in the trade 10 years ago, being an electrician was just a job. Now, he says, it’s more than…
Section 12 is a general section of the Code and applies to all low voltage and extra low voltage wiring installations except for…
January 22, 2024 Statistics Canada is reporting significant growth in Saskatchewan’s building permits. The total value of building permits in the province reached $249 million in November 2023 (seasonally adjusted). This is an 83.9 per cent increase from November 2022, and the highest increase in all of Canada. Saskatchewan also experienced notable month to month…
Rule 28-000 – Scope states that Section 28is a supplementary or amendatory section of the code and provides additional and specific requirements for the installation, wiring methods, conductors, protection, and control of all motors and generators.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
The Manitoba government invites the public to participate in the development of the Apprenticeship and Certification Board five-year strategic plan and share its views on the province’s apprenticeship and certification system and workforce development, Advanced Education, Skills and Immigration Minister Jon Reyes announced today.
December 2, 2022 You saw him take the crown in the 2021 IDEAL National Championship and place in the top 5 at the 2022 IDEAL National Championship finals, now hear his story. When Anthony Kovalchick started in the trade 10 years ago, being an electrician was just a job. Now, he says, it’s more than…
Section 12 is a general section of the Code and applies to all low voltage and extra low voltage wiring installations except for…
January 22, 2024 Statistics Canada is reporting significant growth in Saskatchewan’s building permits. The total value of building permits in the province reached $249 million in November 2023 (seasonally adjusted). This is an 83.9 per cent increase from November 2022, and the highest increase in all of Canada. Saskatchewan also experienced notable month to month…
Rule 28-000 – Scope states that Section 28is a supplementary or amendatory section of the code and provides additional and specific requirements for the installation, wiring methods, conductors, protection, and control of all motors and generators.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
The Manitoba government invites the public to participate in the development of the Apprenticeship and Certification Board five-year strategic plan and share its views on the province’s apprenticeship and certification system and workforce development, Advanced Education, Skills and Immigration Minister Jon Reyes announced today.
December 2, 2022 You saw him take the crown in the 2021 IDEAL National Championship and place in the top 5 at the 2022 IDEAL National Championship finals, now hear his story. When Anthony Kovalchick started in the trade 10 years ago, being an electrician was just a job. Now, he says, it’s more than…
Section 12 is a general section of the Code and applies to all low voltage and extra low voltage wiring installations except for…
January 22, 2024 Statistics Canada is reporting significant growth in Saskatchewan’s building permits. The total value of building permits in the province reached $249 million in November 2023 (seasonally adjusted). This is an 83.9 per cent increase from November 2022, and the highest increase in all of Canada. Saskatchewan also experienced notable month to month…
Rule 28-000 – Scope states that Section 28is a supplementary or amendatory section of the code and provides additional and specific requirements for the installation, wiring methods, conductors, protection, and control of all motors and generators.

November 4, 2025 The inaugural Joint Leadership Conference hosted this October in Toronto by three Ontario contractor associations, Electrical Contractors Association of Ontario (ECAO), the Mechanical Contractors Association of Ontario (MCAO), and the Construction Labour Relations Association of Ontario (CLRAO), featured some interesting discussions around AI and changes coming to the Ontario Construction Act. The… Read More…

November 3, 2025 La Pêche (Quebec, Canada) has constructed a new townhall that was designed for the future. The dramatic two-story structure is comprised of solid wood, both inside and out, and presents an impressive facade on the main street of the community. And it incorporates the latest innovations in sustainable construction. With its forthcoming… Read More…

November 3, 2025 Houle has announced the company has begun work on the Broadway Subway Project in BC. The project will extend the TransLink Millennium Line by 5.7 km to serve the Broadway Corridor, one of BC’s busiest routes, becoming a critical link that connects communities, increases frequency and reliability for transit users, and enhances… Read More…

Overall, the total value of investment in building construction edged up 0.1% to $22.8 billion in August. The non-residential sector edged up $22.9 million, while the residential sector increased slightly by $10.5 million. Year over year, investment in building construction grew 8.7% in August. On a constant dollar basis (2023=100), the total value of investment in building construction in August… Read More…

November 2, 2025 The Electrical Safety Authority (ESA) has announced the appointment of new Board Member Feaz Rahim. “As Chair and on behalf of our Board of Directors, we are pleased to announce that effective October 31st, Feaz Rahim has been appointed by the ESA Board of Directors,” said ESA Chair Arjan Arenja. Feaz Rahim presently… Read More…

November 2, 2025 Shovels are going in the ground for a new BC Cancer centre that will deliver expanded cancer care and treatment for people in Nanaimo and nearby communities. “The new BC Cancer centre in Nanaimo will transform cancer care for people across central Vancouver Island,” said Bowinn Ma, Minister of Infrastructure. “This facility… Read More…

November 2, 2025 George Brown College has announced they will officially become George Brown Polytechnic (GBP). This change demonstrates their commitment to providing advanced educational opportunities and marks a new era in the institution’s evolution. A key highlight of this transformation is the launch of the Master of Construction Management (MCM) program, which serves as… Read More…

November 2, 2025 The Ontario government announced it’s investing more than $8.6 million through the Skills Development Fund (SDF) to help more than 1,700 women across the GTA access training and prepare for good-paying, in-demand jobs in the skilled trades. This funding is part of the government’s $2.5 billion investment in the SDF to protect workers by… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
