Survey Says: Where Electrical Contractors Work
Related Articles
5 Mistakes Electrical Contractors Repeatedly Make on Social Media
Social media has become an integral part of our daily lives. It has also become a place for businesses to make connections, network and spread the word about anything they would like to share. Despite the unlimited potential social media marketing offers electrical contractors, only some of them use it. Even fewer use it properly.
Overcoming the Challenges Facing Motor Controllers
There are two types of electric motors, alternating current (AC) and direct current (DC). AC motors can be synchronous or asynchronous.
Shifts: Emerging Low-Voltage Trends, Impacts and Opportunities for the Canadian Electrical Channel
The shift from electrical to digital systems, and the emerging low-voltage power options to supply them, may be the biggest change the electrical industry has seen in the last 100 years.
A Guide To The Most Essential Hand Tools for Electricians
February 22, 2024 By Jonard Tools It is currently a great time to be an electrician- however, you’ll need the right hand tools for the job. In this article Jonard Tools highlight the most essential hand tools for electrical work, as well as dive into the specifics of how they are utilized and why they’re…
TSE Agricultural Canopies: PcVue at the Heart of a System of Photovoltaic Shades
July 5, 2023 Transitioning to sustainable energy sources is the major challenge of our era. Emission reduction, optimization of consumption, clean energy that is accessible to all, and de-carbonization are some of the challenges to be met in order to preserve the environment and combat energy insecurity. Faced with these many challenges, a host of…
Flexible Workplaces — It’s What They Want!
As organizations compete to attract top talent, more and more job applicants ask about the ability to work remotely, and/or flexible work hours.
5 Mistakes Electrical Contractors Repeatedly Make on Social Media
Social media has become an integral part of our daily lives. It has also become a place for businesses to make connections, network and spread the word about anything they would like to share. Despite the unlimited potential social media marketing offers electrical contractors, only some of them use it. Even fewer use it properly.
Overcoming the Challenges Facing Motor Controllers
There are two types of electric motors, alternating current (AC) and direct current (DC). AC motors can be synchronous or asynchronous.
Shifts: Emerging Low-Voltage Trends, Impacts and Opportunities for the Canadian Electrical Channel
The shift from electrical to digital systems, and the emerging low-voltage power options to supply them, may be the biggest change the electrical industry has seen in the last 100 years.
A Guide To The Most Essential Hand Tools for Electricians
February 22, 2024 By Jonard Tools It is currently a great time to be an electrician- however, you’ll need the right hand tools for the job. In this article Jonard Tools highlight the most essential hand tools for electrical work, as well as dive into the specifics of how they are utilized and why they’re…
TSE Agricultural Canopies: PcVue at the Heart of a System of Photovoltaic Shades
July 5, 2023 Transitioning to sustainable energy sources is the major challenge of our era. Emission reduction, optimization of consumption, clean energy that is accessible to all, and de-carbonization are some of the challenges to be met in order to preserve the environment and combat energy insecurity. Faced with these many challenges, a host of…
Flexible Workplaces — It’s What They Want!
As organizations compete to attract top talent, more and more job applicants ask about the ability to work remotely, and/or flexible work hours.
5 Mistakes Electrical Contractors Repeatedly Make on Social Media
Social media has become an integral part of our daily lives. It has also become a place for businesses to make connections, network and spread the word about anything they would like to share. Despite the unlimited potential social media marketing offers electrical contractors, only some of them use it. Even fewer use it properly.
Overcoming the Challenges Facing Motor Controllers
There are two types of electric motors, alternating current (AC) and direct current (DC). AC motors can be synchronous or asynchronous.
Shifts: Emerging Low-Voltage Trends, Impacts and Opportunities for the Canadian Electrical Channel
The shift from electrical to digital systems, and the emerging low-voltage power options to supply them, may be the biggest change the electrical industry has seen in the last 100 years.
A Guide To The Most Essential Hand Tools for Electricians
February 22, 2024 By Jonard Tools It is currently a great time to be an electrician- however, you’ll need the right hand tools for the job. In this article Jonard Tools highlight the most essential hand tools for electrical work, as well as dive into the specifics of how they are utilized and why they’re…
TSE Agricultural Canopies: PcVue at the Heart of a System of Photovoltaic Shades
July 5, 2023 Transitioning to sustainable energy sources is the major challenge of our era. Emission reduction, optimization of consumption, clean energy that is accessible to all, and de-carbonization are some of the challenges to be met in order to preserve the environment and combat energy insecurity. Faced with these many challenges, a host of…
Flexible Workplaces — It’s What They Want!
As organizations compete to attract top talent, more and more job applicants ask about the ability to work remotely, and/or flexible work hours.
Latest Articles
-
Code Question on Section 24 – Patient Care Areas
July 14, 2025 The rules for the installation of panelboards, circuits, and bonding in Patient Care Area depends on whether the area is designated as either, Basic Care, Intermediate Care or Critical Care. How are these areas defined? Read more on Section 24 — Health care areas Read More…
-
Ontario’s Institutional Component Drives Non-Residential Construction Intentions in May 2025
July 14, 2025 In May, the total value of building permits issued in Canada rose by $1.4 billion (+12.0%) to reach $13.1 billion. The increase in construction intentions was driven by Ontario’s institutional component (+$1.3 billion). On a constant dollar basis (2023=100), the total value of building permits issued in May increased 11.8% from the previous month and was… Read More…
-
Plan Group Partners in Construction of UHN Surgical Tower at Toronto Western Hospital
July 14, 2025 Plan Group is proud to be a partner in the construction of the UHN Surgical Tower at Toronto Western Hospital. Plan Group will provide work on the project in: Mechanical: Plumbing, HVAC, Controls, Medical GasElectrical: Lighting & Controls, Power Distribution, Emergency Generators, UPSTechnology: Structured Cabling, AV Systems including Digital Signage and IPTV UHN’s 15-storey Surgical… Read More…
-
How Canada Can Equip Workers for a Low-Carbon Future
July 14, 2025 The Canadian economy is shifting towards low-carbon industries, and the workforce is shifting with it. New roles are emerging, traditional ones are evolving and the demand for skilled workers is growing fast — particularly in light of the ambitious nation-building agenda the federal government has set out. In the federal Speech from… Read More…
Changing Scene
-
Luxxbox Launches Quick Ship Program to Accelerate Project Timelines
July 16, 2025 Luxxbox announces the launch of its new Quick Ship Program, designed to provide architects, designers, and project managers in the United States and Canada with expedited access to a curated selection of their most in-demand acoustic lighting products. With a two-week turnaround from order to dispatch, the program ensures that project timelines… Read More…
-
ECS Earns Platinum Status for 8th Consecutive Year in Canada’s Best Managed Companies Program
July 16, 2025 Electrical Cable Supply (ECS), Canada’s largest independently owned wire and cable distributors, is proud to announce its re-certification with the prestigious Platinum designation in Deloitte’s Canada’s Best Managed Companies program for the eighth consecutive year. This announcement recognizes ECS’s sustained excellence in strategy, innovation, culture, and strong financial performance. The Canada’s Best… Read More…
-
Nexans Canada Partners with Skills Compétences Canada to Sponsor WorldSkills Team Canada 2026
July 16, 2025 Nexans has announced its partnership with Skills Compétences Canada (SCC), a not-for-profit organization that actively promotes careers in skilled trades and technologies. As part of the partnership, Nexans will sponsor WorldSkills Team Canada 2026 as they prepare to compete at the 48th WorldSkills Competition, taking place in Shanghai, China, from September 22 to 27, 2026. “At Nexans,… Read More…
-
OEL Apprentice Success Project Available Until March 2026
July 14, 2025 With renewed funding by Ontario’s Skills Development Fund, the OEL Apprentice Success Project is now available for another year until March 2026. The project is part of OEL’s Employer Engagement Program (EEP) consisting of wage, training, and equipment subsidies for apprentices. These funding opportunities are available to OEL Members and non-Members. For… Read More…
