Electrical Contractor Salaries by Employer Type
June 7, 2016
Self-employed contractors lead among 6 categories. At the opposite end: franchisees.
Source: Payscale, Inc.
Related Articles
Western Memorial Regional Hospital Sets New Infrastructure Precedent and Receives LEED Silver Certification
August 16, 2024 The new Western Memorial Regional Hospital in Corner Brook is home to Canada’s largest geothermal system, which has set a precedent for modern infrastructure for both Newfoundland and Labrador and North America. The geothermal field is approximately 600 feet below the hospital’s parking lot, and provides 100 per cent of the ground…
Understanding the Differences Between Calibration, Testing, and Validation
Calibration, testing, and validation are intertwined within the science field and it can be complicated when looking at the differences and true meanings. Each activity is used to ensure quality in the measurement process and to comply as per the requirements of a standard.
Smartflower Microgrid Project Enhances Provincial Curriculum Resources and Showcases Saskatchewan Tech
The official launch of the Smartflower Microgrid (MG) marked another milestone for the future of green technology in Saskatchewan.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Guide to the Canadian Electrical Code, Part I — Instalment 48
In this article: Annex J18, Part C. This annex is optionally permitted for use in additions, modifications, renovations or operation and maintenance of existing facilities employing the Division system of classification.
Western Memorial Regional Hospital Sets New Infrastructure Precedent and Receives LEED Silver Certification
August 16, 2024 The new Western Memorial Regional Hospital in Corner Brook is home to Canada’s largest geothermal system, which has set a precedent for modern infrastructure for both Newfoundland and Labrador and North America. The geothermal field is approximately 600 feet below the hospital’s parking lot, and provides 100 per cent of the ground…
Understanding the Differences Between Calibration, Testing, and Validation
Calibration, testing, and validation are intertwined within the science field and it can be complicated when looking at the differences and true meanings. Each activity is used to ensure quality in the measurement process and to comply as per the requirements of a standard.
Smartflower Microgrid Project Enhances Provincial Curriculum Resources and Showcases Saskatchewan Tech
The official launch of the Smartflower Microgrid (MG) marked another milestone for the future of green technology in Saskatchewan.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Guide to the Canadian Electrical Code, Part I — Instalment 48
In this article: Annex J18, Part C. This annex is optionally permitted for use in additions, modifications, renovations or operation and maintenance of existing facilities employing the Division system of classification.
Western Memorial Regional Hospital Sets New Infrastructure Precedent and Receives LEED Silver Certification
August 16, 2024 The new Western Memorial Regional Hospital in Corner Brook is home to Canada’s largest geothermal system, which has set a precedent for modern infrastructure for both Newfoundland and Labrador and North America. The geothermal field is approximately 600 feet below the hospital’s parking lot, and provides 100 per cent of the ground…
Understanding the Differences Between Calibration, Testing, and Validation
Calibration, testing, and validation are intertwined within the science field and it can be complicated when looking at the differences and true meanings. Each activity is used to ensure quality in the measurement process and to comply as per the requirements of a standard.
Smartflower Microgrid Project Enhances Provincial Curriculum Resources and Showcases Saskatchewan Tech
The official launch of the Smartflower Microgrid (MG) marked another milestone for the future of green technology in Saskatchewan.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Guide to the Canadian Electrical Code, Part I — Instalment 48
In this article: Annex J18, Part C. This annex is optionally permitted for use in additions, modifications, renovations or operation and maintenance of existing facilities employing the Division system of classification.
Latest Articles
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
-
Code Quiz: Canadian Electrical Code, Part 1, 26th Edition Section 28 – Motors and Generators
by William (Bill) Burr Question: Adam is working in his garage cutting wood on his table saw. Suddenly the lights go out and the sump pump and the table saw stop running. There is obviously a power outage. After a short time, the lights and the sump pump come back on, but thetable saw stays off. Adam needs to restart it. Can you explain why the lights and sump pump come back on… Read More…
Changing Scene
-
Andrey Goreev Joins Mersen Electrical Power as Regional Sales Manager
June 9, 2025 MERSEN CANADA TORONTO INC. is pleased to announce effective June 2nd, 2025, Andrey Goreev has joined Mersen Electrical Power as Regional Sales Manager for the Western Canada Region. He will report to Tom Arbanas, Vice President of Distribution Sales and Customer Care, Canada. Andrey has over 18 years of experience in industrial… Read More…
-
Electric Avenue Powers Ahead with Major Win and New Flagship Product: Watti Pro Echo
June 9, 2025 In an industry dominated by global giants, a startup from Canada’s East Coast is quickly becoming one of the most compelling cleantech success stories in the country. Electric Avenue, a Nova Scotia–based EV charging manufacturer, is making waves in the North American market with the official launch of its Watti Pro Echo… Read More…
-
Manitoba and BC Establish Free Trade Agreements
June 9, 2025 The Manitoba government will sign a new memorandum of understanding with British Columbia to advance free trade between the two provinces and cabinet will pass regulations by July 1 to ensure mutual recognition of other provinces by Canada Day, Premier Wab Kinew announced today at the MBiz Breakfast Series hosted by the… Read More…
-
Nova Scotia Removing Trade Barriers With Other Provinces, Federal Government
June 9, 2025 Trade barriers between Nova Scotia, several provinces and the federal government will soon be removed. Nova Scotia, along with Alberta, British Columbia, Manitoba, Ontario and Prince Edward Island have taken action to remove barriers and red tape that will open up new trade and investment opportunities. It is also anticipated that the… Read More…
