Top 5 Optical Fibre Myths

March 30 2016

Luis Cardenas

Optical fibre has been the backbone of Internet infrastructure for years and almost all our communications rely on it: telephony services, Wi-Fi or CATV. It is also responsible for building-to-building connectivity in campuses and is used in a variety of military applications. But still there are some myths about this incredible technology and we’d like to expose them.

1. Fibre is fragile

Yes, glass used in everyday products is easy to break, but although optical fibre is as thin as a human hair it is actually stronger  than copper. Optical fibre cables are designed to resist the roughest installations, tolerating higher temperature levels and withstanding more than 200 pounds of pulling tension.

2. Installations are challenging

Fibre may have been difficult to install many years ago, when connectors had to be polished and terminations needed to be done by hand. Nowadays, technology improvements have made it easy to install and to test.

3. Fibre doesn’t support wireless

Due to optical fibre large bandwidth capacity and its long -term compatibility with networking hardware, telecoms rely on optical fibre to transmit wireless mobile signals from towers to central networks. So if you are reading this article on your phone, it’s probably thanks to optical fibre technology.

4. You can’t bend it

It’s true that fibre was sensitive to bending, but that changed some years back with the introduction of insensitive fibre, a kind of fibre in which an optical trench was constructed into it to reflect light back into the core. This type of fibre is perfect to be used in hard to reach places without affecting its performance.

 

 

 

 

 

 

 

 

 

 

 

5. Fibre is more expensive than copper

When considering the entire structure, fibre ends up being cheaper than copper. Fibre networks need less equipment, therefore they consume less power, which means lower costs over the long term. Also, optical fibre maintenance costs are less than copper’s.


With information from Corning. This article first appeared as a blog. Source: Beyondtech, Inc.

Photo of fibre optic cables courtesy of pixabay: pixabay.com/en/fiber-optic-cable-rainbow-colors-246272/.

 

 

 

Related Articles


Latest Articles

  • New STANDATA Interpretation & Variance: Use of Neutral Conductors in Consumer’s Service Reporting of Electrical Incidents

    New STANDATA Interpretation & Variance: Use of Neutral Conductors in Consumer’s Service Reporting of Electrical Incidents

    October 6, 2025 There are two new STANDATA releases for the province of Alberta: The purpose of these two releases is to clarify requirements for reporting electrical incidents in Alberta and to permit the use of underground service entrance cable (USEB) with a bare neutral conductor in underground installations at service entrance equipment. STANDATA variance… Read More…

  • BizEnergySaver Program Available in Toronto & Ottawa

    BizEnergySaver Program Available in Toronto & Ottawa

    October 6, 2025 Commercial buildings in Ottawa and Toronto’s Richview South area can receive direct installation and instant discounts on energy-saving equipment upgrades for lasting benefits. The Save on Energy BizEnergySaver program is designed to help industrial, commercial and institutional (ICI), and multi-residential building owners and operators make equipment improvements to reduce their energy consumption…. Read More…

  • Electrical Industry Day of Recognition – October 6, 2025: John’s Story

    Electrical Industry Day of Recognition – October 6, 2025: John’s Story

    October 6, 2025 The Electrical Injury Day of Recognition is sponsored by the Electrical Contractors Association of Alberta, the Canadian Electrical Contractors Association, the Electrical Contractors Association of British Columbia, and the National Electrical Trade Council. The Canadian electrical industry is calling on all tradespeople and those who benefit from them, to set aside October 6 as a day… Read More…

  • Research Report: Visible and Invisible Consequences of Electrical Injury

    Research Report: Visible and Invisible Consequences of Electrical Injury

    October 6, 2025 This report was produced by the Infrastructure Health & Safety Association (ISHA). You can find the report, as well as sources on their website. This report has been written by Dr. Manuel Gomez, director of the St. John’s Rehab Research Program at Sunnybrook Health Sciences Centre in Toronto. Electricity is an important… Read More…


Changing Scene

  • Ontario Takes Next Step in Bowmanville Hospital Expansion

    Ontario Takes Next Step in Bowmanville Hospital Expansion

    October 6, 2025 The Ontario government is marking a key milestone in delivering high-quality hospital care for families in Durham Region by issuing a Request for Proposals (RFP) to select the team that will lead the expansion and revitalization of Lakeridge Health’s Bowmanville Hospital. This project will mark one of the largest redevelopments at Lakeridge… Read More…

  • Nova Scotia Takes Further Steps to Unlock Development in Halifax

    Nova Scotia Takes Further Steps to Unlock Development in Halifax

    October 6, 2025 Nova Scotia is taking more action to support housing growth in Halifax Regional Municipality (HRM), issuing new orders and moving policies forward. The measures include Municipal Affairs Minister John Lohr designating HRM as an interim planning area. Under this order, new minimum planning requirements for HRM take effect immediately. The designation also enables… Read More…

  • E.B. Horsman & Son Announces Stephen Murray as New Calgary Branch Manager

    E.B. Horsman & Son Announces Stephen Murray as New Calgary Branch Manager

    October 6, 2025 EB Horsman & Son is pleased to announce the appointment of Stephen Murray as Branch Manager of its Calgary location, effective Tuesday, September 3, 2025. Stephen Murray brings over two decades of experience in the industrial automation sector, where he has built a strong reputation for driving growth, expanding market presence, and… Read More…

  • E.B. Horsman & Son Announces Maxim Laberge as New Process Instrumentation Manager

    E.B. Horsman & Son Announces Maxim Laberge as New Process Instrumentation Manager

    October 6, 2025 EB Horsman is excited to welcome Maxim Laberge as its new Process Instrumentation Manager. Maxim Laberge brings over 25 years of experience in electrical, instrumentation, and control systems, with a proven record in business development, client engagement, and strategic project leadership. He is known for his consultative approach, combining technical insight with… Read More…