Survey Says: What Sectors Electrical Maintenance People and Mechanics Work In
Related Articles
B.C. Electrical Code, 2021 Edition Comes into Effect October 1, 2022
Effective October 1, 2022 the Canadian Electrical Code, Part I, 25th Edition, Safety Standard for Electrical Installations, Canadian Standards Association Standard C22.1-21 is adopted as the BC Electrical Code. All electrical work that is subject to the BC Electrical Code must be in compliance with the updated edition effective November, 30, 2022.
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 10 – Grounding and Bonding](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 10 – Grounding and Bonding
April 8, 2024 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes, it can seem daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B, or the…
Value of Building Permits in February Declined 5.7% from January
Canadian municipalities issued $7.8 billion worth of building permits in February, down 5.7% from the previous month. The decline was largely due to lower construction intentions for multi-family dwellings.
Networking & Dating: How the Two Go Hand in Hand
Building a professional network can often feel like dating: putting yourself out there to strangers, not knowing what to say and carrying that fear of rejection. But just like dating, there are ways to make networking much easier. Here’s how.
Planned Shift from Gas to Electric Heat Required to Avoid High Costs and Emissions: Report
June 14, 2024 New research published today by the Canadian Climate Institute finds that a system-wide shift from gas to electric heat is the lowest-cost path through the clean energy transition. The report, Heat Exchange: How today’s policy choices will drive or delay Canada’s transition to clean, reliable heat, concludes that provincial government action will be necessary to protect reliability and…
Guide to the Canadian Electrical Code, Part I
Since earlier articles were based on the 23rd Edition of the CEC, Part I, I have revised this series of articles to reflect any changes made pursuant to the 24th and 25th Editions.
Latest Articles
-
Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara
By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
Changing Scene
-
Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity
June 13, 2025 Eaton, and Siemens Energy have announced a fast-track approach to building data centers with integrated onsite power. They will address urgent market needs by offering reliable grid-independent energy supplies and standardized modular systems to facilitate swift data center construction and deployment. The collaboration will enable simultaneous construction of data centers and associated… Read More…
-
Latest Social Media Challenge Puts Students at Risk of Electrical Shock
June 13, 2025 The Electrical Safety Authority (ESA) is warning Ontarians that a shocking new social media trend is putting students at risk of serious electrical injury including shock, burns or even fires. A pair of dangerous social media trends have been gaining interest from students. One has kids “challenging” each other to stick a… Read More…
-
Plan Group Announce New VP of Electrical
June 13, 2025 Plan Group are proud to announce the promotion of Dave Scott as Vice President of Electrical. Dave has been a key part of Plan Group’s success for the last 16 years, leading with drive, accountability, and a deep understanding of what it takes to get the job done right. He will now… Read More…
-
Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26
June 13, 2025 On Monday, May 26, 2025, Electro-Federation Canada (EFC) held its Annual General Meeting, which included an update on key initiatives, the welcoming of a new Chair, and the election of the 2025-2026 Board of Directors. EFC President & CEO Carol McGlogan shared key highlights from the past year and provided a summary of the… Read More…
