Survey Says: Where Electrical Contractors Work
Related Articles
CCA Bulletin: Managing Tariff Risks in Construction Projects
April 13, 2025 This bulletin was prepared by select members of the Canadian Construction Association’s (CCA) General Contractors National Advisory Council. Its purpose is to assess the potential impacts of tariffs and counter-tariffs on general contractors in Canada focusing specifically on: In both areas, the bulletin explores both upstream and downstream impacts – examining how…
IDEAL Industries Hosts Support Ontario Youth’s Tools In The Trades Boot Camps
In Ajax, Ontario, Ideal Industries (Canada) Ltd. conducted an Electrical boot camp for Support Ontario Youth on September 17th.
Bonded-Pair Cabling Prepares Networks for the Internet of Things
When it comes to the IoT — the Internet of Things — we consider every signal transmitted as mission-critical…
Guide to the Canadian Electrical Code, Part 1 , 25th Edition – A Road Map: Section 80
Rule 80-000 notes that this is a supplementary or amendatory section of the code and applies only to the installation of impressed current cathodic protection systems. Appendix B and the CEC Handbook have additional information and descriptions of Cathodic Protection. This Section considers that the wiring methods used in installing such systems are sometimes inconsistent with the requirements of other Sections of the Code.
Alert: Electrical Lockout Using Manual Motor Controllers
Workers in industrial workplaces such as office buildings, factories, arenas, shops or offices who are required to work on manual motor controllers…
CCA Bulletin: Managing Tariff Risks in Construction Projects
April 13, 2025 This bulletin was prepared by select members of the Canadian Construction Association’s (CCA) General Contractors National Advisory Council. Its purpose is to assess the potential impacts of tariffs and counter-tariffs on general contractors in Canada focusing specifically on: In both areas, the bulletin explores both upstream and downstream impacts – examining how…
IDEAL Industries Hosts Support Ontario Youth’s Tools In The Trades Boot Camps
In Ajax, Ontario, Ideal Industries (Canada) Ltd. conducted an Electrical boot camp for Support Ontario Youth on September 17th.
Bonded-Pair Cabling Prepares Networks for the Internet of Things
When it comes to the IoT — the Internet of Things — we consider every signal transmitted as mission-critical…
Guide to the Canadian Electrical Code, Part 1 , 25th Edition – A Road Map: Section 80
Rule 80-000 notes that this is a supplementary or amendatory section of the code and applies only to the installation of impressed current cathodic protection systems. Appendix B and the CEC Handbook have additional information and descriptions of Cathodic Protection. This Section considers that the wiring methods used in installing such systems are sometimes inconsistent with the requirements of other Sections of the Code.
Alert: Electrical Lockout Using Manual Motor Controllers
Workers in industrial workplaces such as office buildings, factories, arenas, shops or offices who are required to work on manual motor controllers…
CCA Bulletin: Managing Tariff Risks in Construction Projects
April 13, 2025 This bulletin was prepared by select members of the Canadian Construction Association’s (CCA) General Contractors National Advisory Council. Its purpose is to assess the potential impacts of tariffs and counter-tariffs on general contractors in Canada focusing specifically on: In both areas, the bulletin explores both upstream and downstream impacts – examining how…
IDEAL Industries Hosts Support Ontario Youth’s Tools In The Trades Boot Camps
In Ajax, Ontario, Ideal Industries (Canada) Ltd. conducted an Electrical boot camp for Support Ontario Youth on September 17th.
Bonded-Pair Cabling Prepares Networks for the Internet of Things
When it comes to the IoT — the Internet of Things — we consider every signal transmitted as mission-critical…
Guide to the Canadian Electrical Code, Part 1 , 25th Edition – A Road Map: Section 80
Rule 80-000 notes that this is a supplementary or amendatory section of the code and applies only to the installation of impressed current cathodic protection systems. Appendix B and the CEC Handbook have additional information and descriptions of Cathodic Protection. This Section considers that the wiring methods used in installing such systems are sometimes inconsistent with the requirements of other Sections of the Code.
Alert: Electrical Lockout Using Manual Motor Controllers
Workers in industrial workplaces such as office buildings, factories, arenas, shops or offices who are required to work on manual motor controllers…
Latest Articles
-
Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara
By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
Changing Scene
-
IPEX Celebrates Grand Opening of New Distribution Centre in Woodstock, Ontario
June 16, 2025 IPEX recently celebrated the grand opening of its new 150,000 sq. ft. distribution centre (DC), representing a more than $27 million investment in the company’s supply chain network. Located in Woodstock, Ont., the facility includes traditional warehousing operations as well as a cross-docking function, enabling faster, and more efficient movement of goods… Read More…
-
Canada Infrastructure Bank Commits $100M Towards Building Retrofits with Scotiabank
June 16, 2025 The Canada Infrastructure Bank (CIB) is expanding its Building Retrofit Initiative (BRI) by forming a $100 million partnership with Scotiabank to finance deep energy retrofits across their commercial real estate clients in Canada. The loans to building owners will support the modernization of their assets and reduce their environmental impacts. Through this… Read More…
-
Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity
June 13, 2025 Eaton, and Siemens Energy have announced a fast-track approach to building data centers with integrated onsite power. They will address urgent market needs by offering reliable grid-independent energy supplies and standardized modular systems to facilitate swift data center construction and deployment. The collaboration will enable simultaneous construction of data centers and associated… Read More…
-
Latest Social Media Challenge Puts Students at Risk of Electrical Shock
June 13, 2025 The Electrical Safety Authority (ESA) is warning Ontarians that a shocking new social media trend is putting students at risk of serious electrical injury including shock, burns or even fires. A pair of dangerous social media trends have been gaining interest from students. One has kids “challenging” each other to stick a… Read More…
