Canadian Electrical Industry News Week

 

Non Residential ConstructionFollowing three consecutive quarters of growth, investment in non-residential building construction decreased 1.2% to $12.9 billion in the first quarter. This decline was largely the result of lower spending on the construction of commercial buildings (-1.9%).

Chart 1: Investment in non-residential building construction

 

Overall, investment decreased in eight provinces in the first quarter. The largest decline was in Ontario, where investment fell 2.0% to $4.9 billion as a result of lower spending on commercial buildings.

Alberta and British Columbia were the only provinces to register gains. In Alberta, the gain was due to increases in the institutional and industrial components, while in British Columbia, it resulted from higher spending on institutional buildings.

Census metropolitan areas

Investment was down in 20 of the 34 census metropolitan areas in the first quarter. The largest decline occurred in Ottawa, followed by Saskatoon. In Ottawa, the decrease was attributable to commercial spending, while the decline in Saskatoon came largely from lower spending in commercial and institutional buildings.

Conversely, the largest advances were reported in Edmonton and Vancouver. In Edmonton, the increase resulted from higher investment in the construction of institutional and commercial buildings, while in Vancouver investment advanced in all three components, mainly institutional buildings.

Commercial component

Investment in the commercial component declined 1.9% to $7.7 billion. This was the second consecutive quarterly decrease in the component and was mainly the result of lower spending on the construction of retail and wholesale outlets and recreational buildings.

Ontario posted the largest decrease, as investment fell 4.0% to $2.9 billion, the third consecutive quarterly decline. The decrease was mainly attributable to lower spending on the construction of retail and wholesale outlets, recreational buildings and warehouses.

Quebec and Newfoundland and Labrador posted increases, as a result of higher spending spread among several commercial building categories.

Chart 2: Commercial, institutional and industrial components

 

 


 Salex Expands to Southwestern Ontario                                                                   

LDS Salex 12 175

Salex continues to support the Southwestern Ontario market with representation of key market leaders in lighting and controls, including its partnership with Axis Lighting, Beghelli Canada and OSRAM.

Axis Lighting is an innovative, forward-thinking manufacturer delivering high-performance LED luminaires for general, ambient and task lighting in office, commercial and institutional spaces. One of their leading-edge developments includes Stencil. Stencil brings together lighting segments and connectors called Hubs, the building blocks for creating forms and patterns of all sizes. 

 Read More


 

Changing Scene

  • Prev
The Ontario Society of Professional Engineers (OSPE), the voice of Ontario’s engineering community, ...
Schneider Electric announced today the promotion of Adrian Thomas to country ...
Mark your calendars for Nov. 24-25 and get ready for a virtual trade show and amazing technical ...
Join Schneider Electric live on November 10th for their virtual event as industry leaders ...
The Alberta Electrical Alliance have partnered with Mansfield Technical Services to provide ...
InfraCanada / InfraQuebec is an annual series of user group meetings across Canada for FLIR and ITC ...
ESA’s response team has been working diligently to address the emerging issues. We are moving into ...


The Jaibot executes its tasks based on building information modeling (BIM) data. The robot is a completely cordless and easy-to-use system that doesn’t require expert skills. It locates itself accurately indoors, drills the holes dust-controlled and finally marks them according to the trade. 

Read More

 


LDS IESO retrofit 400Two pioneering greenhouse growers are testing energy-efficiency technologies in the Windsor-Essex region in an effort to support local economic growth. As significant expansion of Ontario’s greenhouse sector increases the need for electricity, the Independent Electricity System Operator (IESO) has been working with communities on solutions to ensure continued electricity reliability and cost-effectiveness.

Supported by the IESO’s Grid Innovation Fund, the pilot projects are a response to consultations with communities, the greenhouse sector, local utilities and other sector partners, to integrate innovative thinking and explore new solutions beyond conventional electricity infrastructure.

Read More

EIN AEA virtual 400Mark your calendars for Nov. 24-25 and get ready for a virtual trade show and amazing technical presentations. AEA, the exhibitors and presenters are so excited to present this event to the entire province of Alberta.

Attendees will have easy access to virtual booths with an opportunity to have their questions answered by qualified people, and win some prizes throughout the days at both the trade show Virtual Floor and by attending the seminars.

 

Go HERE to register and for the full event details

 

 


 



Lighting ControlsBy Jeremy Day

Building a control system for a modern lighting installation can seem like an impossibly complex task. To simplify it, a systematic approach to understanding the needs of the design, facility, and user can be employed. In this white paper, we aim to define the questions one must answer to construct an appropriate control system.

First, and perhaps counterintuitively, one must start with the control narrative. A lighting programming and control narrative is a document that is essential to coordinate the design/construction process with a fully realized final architectural product. 

Read More


 

Terry BeckerBy Terry Becker

Changes in the CSA Z462 Workplace electrical safety standard are slowing down. Good news! The 2021 edition will see significant reorganization of content in Clause 4.1, changes to existing annexes, some new annexes and a significant change to the arc flash PPE category method of determining “additional protective measures” for a work task’s arc flash risk assessment are included in the 2021 edition.

CSA Z462 2021 edition will not be 100% technically harmonized with the 2021 edition of NFPA 70E...


Read More


 

Product News

  • Prev
The AutomationDirect lineup of tools and test equipment now includes digital multimeters, clamp-on ...
The NX Room Controller is the central component of the NX room control solution. Used individually ...
The COHEN single pendants add a modern industrial aesthetic to your indoors that is meant to last ...
Shat-R-Shield's Correctional Cell Fixture is designed to withstand extreme abuse by using materials ...
Universal Lighting Technologies, Inc., a member of the Panasonic family of companies, recently ...
The wall sconce design was inspired by the Infinity Modern Pendant.  This version is wall ...
High Output LED PAR Replacement Lamps directly replace high-wattage incandescent PAR lamps at a ...
Easily create continuous rows of light with the Contractor Select™ RLNK by Lithonia Lighting® by ...
Pow-R-Command PRC750E controller is suitable for lighting control and plug load control. It offers ...
Intermatic's Smart Guard® Whole House Surge Protective Device provides coverage of your ...


 

Shat-R-Shield Ironclad VR ProShat-R-Shield's Correctional Cell Fixture is designed to withstand extreme abuse by using materials that are virtually indestructible. Built with 1/2" thick 304 Stainless Steel and a cast .400" thick diffused lens, this light fixture is built to withstand hard/repetitive impacts and its tight design offers no point of entry.

The Ironclad® Vandal-Resistant (VR Pro) fixture uses an LED high efficiency light engine with a cool light that simulates daylight. The incorporated count light LED module can be turned on and off. Tested to Canadian and US standards by Underwriters' Laboratories, this fixture carries a cULus rating.

Read More


 

M12™ Heated TOUGHSHELL™ Jacket KitOur heated TOUGHSHELL™ jacket is powered by our powerful M12™ REDLITHIUM™ batteries. Each heated jacket uses carbon fiber heating elements to create and distribute heat to your chest, back and front hand pockets. A one-touch LED controller heats up the battery heated jacket to three heat settings, creating a comfortable heat for any environment or weather.

This MILWAUKEE® heated jacket has a new Quick-Heat function that allows you to feel heat three times faster than our previous jackets and market competitors. 

Read More

 


 

Peers & Profiles

  • Prev
For more than a century, ABB has been investing in Canadian technologies and products to support ...
Mackenzie Gillan, a bright young lady from Baysville, Ontario, tells us about how she learned ...
Energy Efficient Lighting is a LED lighting manufacturer with nearly 30 years of industry ...
Dee Durant is an industrial electrician apprentice attending Conestoga College and an Ambassador ...
ECAO recently launched a new program called Future Leaders Advisory Council (FLAC). Their inaugural ...
At 14, Tom Miguel was sitting in the counselor’s office of Silverthorn Collegiate Institute in ...
Meredith Halfpenny is a Wind Site Technician with Boralex where she inspects, maintains, and ...
Rutul Bhavsar is a final year Electrical Engineering student at Mohawk College. He recently ...
Shannon Tymosko is a first-year apprentice with IBEW (International Brotherhood of Electrical ...
ELG Electric is an electrical contractor based out of Goderich, Ontario serving the area’s ...


Kenzie GillanBy Sarah Pickard

Mackenzie Gillan, a bright young lady from Baysville, Ontario, tells us about how she learned to love the electrical trade in high school, and how that path has carried her forward to unexpected places and new heights—literally. Gillan is set to begin a Powerline Technician Apprenticeship with Hydro One, and as she explains below, she had some interesting experiences during two college co-op placements.

While her career has just begun, Gillian is already active in the broader industry as an advocate for women, working as an ambassador for KickAss Careers, Women of Powerline Technicians, and Women in Renewable Energy (WiRE).

Read More


 



Rutul Bhavsar 1 400By Blake Marchand

Rutul Bhavsar is a final year Electrical Engineering student at Mohawk College. He recently co-authored a whitepaper on Mohawk College’s Joyce Centre for Partnership & Innovation discussing the technologies utilized in the state-of-the-art zero-carbon/carbon-neutral facility. Rutul was the lead author on the project, supported by Dr. Mariano Arriaga, General Manager of Mohawk’s Energy and Power Innovation Centre (EPIC) and Dr. Tony Cupido Research Chair,

Sustainability at Mohawk College. Rutul’s interests lie in the more progressive areas of the industry, automation, control, and energy efficient technologies. It is no doubt a positive sign for the industry to have talented individuals such as Rutul who are passionate about contributing to a more sustainable future. 

Read More


 

ABBFor more than a century, ABB has been investing in Canadian technologies and products to support the development of local businesses.

Canada has been known around the world for its delicious maple syrup and warm winter coats. But it is also a place for innovation, certainly for technology leader ABB, which has partnered with several Canadian customers to foster industrial transformation and manufacture products that suit their specific needs for over a century. Across Canada, ABB experts build the most trusted products in North America.

 

Read More


 

Copper $US Dollar price per pound

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil