North American Standards for EV Charging Stations

EIN EV Charger 400

June 27, 2021
New CSA standards help pave the way for certification of electric vehicle charging stations in North America.

The rise of electric vehicles

With the environment a pressing concern, some governments have been taking steps to reduce their dependency upon fossil fuels. For example, the British government plans to ban the sale of new gasoline- and diesel-powered cars by 2035, while California is aiming to end its sale in the state by 2035. In Canada, the government has set targets for zero-emission vehicles reaching 10% of light-duty vehicle sales by 2025 and 100% by 2040 [1].

Electric vehicles — which use a rechargeable battery to power an electric motor — are the most popular option for replacing fossil fuel-powered cars, which include hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs) and all-electric vehicles (EVs). Another option is hydrogen fuel cell-powered vehicles (sometimes called fuel cell vehicles, or FCVs), which use pressurized hydrogen to produce electricity in a fuel cell that powers the motor.

According to Natural Resources Canada, there are currently almost 13,000 electric charging outlets at more than 5,000 stations across Canada (and growing) [2]. Petro-Canada is continuing to expand its Electric Highway, which is a nationwide EV fast-charging network from Halifax to Victoria, while Tesla has activated charging stations along the Trans-Canada Highway, with some at Canadian Tire locations [3].

Lack of standards creates bottleneck

The demand for EV charging stations in Canada has grown at a compound average rate of 46% annually for the past five years [4]. But as more charging stations were becoming available across the country, there was no North American standard that covered all the components that make up these systems.

While there were standards that applied to some components, they didn’t apply to the entire system. Some components were built exclusively for charging stations, so there were no standards for those components, such as for the connector to the vehicle, the electric vehicle cable and the charging circuit interrupting device, or CCID.

That meant manufacturers had to inspect every new set of charging station systems deployed, creating a bottleneck for the development of EV infrastructure in North America.

New standards lead to certification program

To deal with this issue, CSA Group electrical systems experts analyzed the different components of EV charging stations used in the North American market, including the charging station, quick charger, electric vehicle cable, electric vehicle connector and CCID.

This process included research on global safety-related standards that apply under the EV umbrella, such as power transfer to the grid, battery swapping, commercial vehicle charging and mining electrification. This research took into consideration the different existing designs as well as the potential evolution of the technology.

The output of this work was then included in the following harmonized standards:

• CSA C22.2 No.280: Electrical Vehicle Supply Equipment
• CSA C22.2 No. 281.1: Personnel Protection Systems for EV Supply Circuits
• CSA C22.2 No. 281.2: PPE Usage for Charging Systems
• CSA C22.2 No.282: Plugs, Receptacles and Couplers for Electric Vehicles

A Technical Information Letter (TIL) was also created by CSA Group electrical systems experts to encourage the development of safety-related requirements for the cables used to connect charging stations to the vehicles. The types of cables identified in this TIL were added by Canadian Standards Association’s technical committee experts to the Canadian Electrical Code Part I. Further to that, this TIL resulted in an update to the standard CSA C22.2 No. 49 Flexible Cords and Cables, and will be part of a new standard for electric vehicle cables (CSA Standard C22.2 No. 332) that is about to be published.

These standards have allowed for the creation of certification programs for complete charging station system models in North America. For more details about this case, or to discuss challenges you’re facing with bringing EV charging stations to market, please contact us at certinfo@csagroup.org.

This article was first published online by CSA Group; www.csagroup.org/article/north-american-standards-for-ev-charging-stations/

Photo by Sophie Jonas on Unsplash

References

1. National Resources Canada. “Zero Emission Vehicle Infrastructure Program.” 

2. National Resources Canada. “Electric Charging and Alternative Fuelling Stations Locator.” 

3. L. Sarabia. “Canada’s EV charging networks are growing at pace, but more is needed.” Electronic Autonomy; https://electricautonomy.ca/2020/03/02/canadas-ev-charging-networks-2020/

4. IEA,“GlobalEVOutlook2020,”2020.[Online]; www.connaissancedesenergies.org/sites/default/files/pdf-actualites/Global_EV_Outlook_2020.pdf

Related Articles


Latest Articles

  • Shore-Side Electricity and Data Monitoring Take Hold in the Cruise Industry

    Shore-Side Electricity and Data Monitoring Take Hold in the Cruise Industry

    April 15, 2024 On July 7, 2023, the United Nations International Maritime Organization (IMO) and its participating maritime countries set their Greenhouse Gas (GHG) emissions strategy to achieve net zero “by or around” 2050. As a result, the shipping industry, including cruise lines, is adopting various strategies to achieve this ambitious goal, including new fuels,… Read More…

  • Project Spotlight: Sainte-Thérèse High School Lighting Upgrade

    Project Spotlight: Sainte-Thérèse High School Lighting Upgrade

    Built in 1980, the building that houses Sainte-Thérèse high school, in Quebec Canada, was looking a little worse for the wear. Renovation work began with two major projects: introducing a multidisciplinary sports centre, as well as redesigning the parking lots.  The employee and visitor parking lots were completely reconfigured during phase 1 of the renovation… Read More…

  • Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 10 – Grounding and Bonding

    Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 10 – Grounding and Bonding

    April 8, 2024 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes, it can seem daunting to quickly find the information you need.  This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B, or the… Read More…

  • Investment in the Residential Sector Declines in January 2024

    Investment in the Residential Sector Declines in January 2024

    April 8, 2024 Investment in building construction declined 0.9% to $19.7 billion in January. The residential sector declined 1.4% to $13.6 billion, while investment in the non-residential sector edged up 0.2% to $6.1 billion. On a constant dollar basis (2017=100), investment in building construction fell 0.9% to $12.1 billion in January. Investment in the residential sector declines Investment in residential building construction declined… Read More…


Changing Scene