Acuity Brands Filtered Far-UVC Module Receives UL Certification

EIN Acuity farUVC 400

August 13, 2021

Acuity Brands has announced its Care222® filtered far-UVC module with patent-pending dosing electronics is the first germicidal UV (GUV) source in the wavelength range 200-230 nm (i.e., “far-UVC”)  to be UL LLC Certified to meet U.S. and Canadian standards for germicidal equipment for use in occupied spaces.

When properly installed and administered, the module is in the Exempt risk group for photobiological hazards, as described in the IEC 62471:2006, Photobiological safety of lamps and lamp systems.

“This tremendous technical achievement has come at a time when the worldwide awareness of the need to control pathogens has never been greater. Substantive pathogen control in spaces while people are present can support vital activities where we work, live and play,” said Ron Schimmelpfenning, Vice President-Technology Solutions, Acuity Brands Lighting.

The UL Recognized Component certification paves the way for incorporating the module into a variety of Acuity Brands LED lighting products to deliver a measured 222nm far-UVC dosage in occupied spaces. These lighting products provide a 222nm far-UVC dosage that can effectively target pathogens1 throughout the day in indoor applications such as schools, hospitals, manufacturing, hospitality and retail, while maintaining a natural-looking light emittance.

“The certification of the Care222 module for use in lighting products in occupied spaces is the result of rigorous testing and evaluation performed by UL scientists working together with research and development teams from Acuity Brands and Ushio America, Inc. in what has become a breakthrough category in GUV product development. The certification process followed by UL included an assessment to IEC 62471 for the GUV module when installed and used according to instructions,” said Schimmelpfenning.

An important part of the Care222 far-UVC module development involved the creation of patent-pending dosing electronics by Acuity Brands. These electronics allow for highly precise administration of UVC doses to target pathogens1 in occupied or unoccupied spaces. The completed module is an outgrowth of the 2020 strategic alliance agreement between Acuity Brands and Ushio America which granted Acuity Brands exclusive rights in North America to incorporate Ushio’s Care222 far-UVC disinfection* technology into Acuity Brands luminaires.

 

{youtube}Kxl3zbXA-98{/youtube}

 

Ushio’s disinfection technology uses filtered excimer lamps to generate 222nm far-UVC light.  The mercury-free Care222 excimer lamps feature a specially designed short pass filter, based on groundbreaking research and technology developed by Columbia University, which filters out from the lamp the longer UV wavelengths that are potentially harmful to humans. The result is a narrow band 222nm wavelength of UV light that can inactivate viruses and bacteria, effectively preventing them from replicating. Without this filter, excimer lamps would need to deliver much lower doses of UV to work within established exposure guidelines and would not work as quickly.  

Results from laboratory testing and clinical studies suggest that the filtered UV light emitted from the Care222 lamp can reduce known viruses and other pathogens, including SARS-CoV-22, on surfaces and in air.  When used within appropriate parameters, the 222nm wavelength emitted from the Care222 lamp inactivates viruses and bacteria at energy levels that do not penetrate living tissue in skin or beyond the tear layer in eyes, allowing spaces in which the lamps are used to remain occupied during use. In contrast, possible acute and chronic damage to eyes and skin may result from the more generally employed 254nm UV wavelength used in many germicidal lamps unless this UV wavelength is used under conditions that sharply limit human exposure.

“Using luminaires as a delivery system allows facilities to take advantage of locations where power is already distributed,” said Schimmelpfenning. “This enables the Care222 far-UVC disinfection technology to be added as a layer of functionality to necessary illumination using the intelligent control capabilities built into the luminaire.”

Acuity Brands is in the process of seamlessly incorporating the Care222 far-UVC disinfection modules in familiar luminaires and stand-alone products from its multiple lighting brands, creating a broad lineup of UL Certified far-UVC-enabled luminaires. Orders are being accepted now for the HDM™ luminaire from Healthcare Lighting® and HLDM™ luminaire from Holophane®.  Coming soon are far-UVC-enabled luminaires from Gotham®, Lithonia Lighting® and Mark Architectural Lighting™.  For more information about the properties of 222nm far-UVC light, Care222 excimer lamps, and products using these disinfection technologies please visit our website.

Refer to product specification sheets at acuitybrands.com/UV-Products for efficacy claims and claim substantiation regarding specific products and pathogens.

2 In a 2020 study, Hiroshima University confirmed that under laboratory conditions, a dose of 3 mJ/cm2 of 222nmUVC irradiation, with an exposure time of 30 seconds inactivated 99.7% of SARS-CoV-2 on a surface. Ushio’s Care222 UV-C disinfection module was placed 24 cm above the surface of the plates in which the viral samples were placed. Read the study: Effectiveness of 222-nm ultraviolet light on disinfecting SARS-CoV-2 surface contamination

*All references to “disinfection” are referring generally to bioburden reduction and are not intended to refer to any specific definition of the term as may be used for other purposes by the U.S. Food and Drug Administration or the U.S. Environmental Protection Agency. Bioburden reduction is a function of fixture run time, distance to the UV light source, airflow, room size and/or other factors, and the level of reduction will vary within a specific space. Neither the disinfection technology as incorporated in Acuity Brands products nor the products themselves are intended for use as a medical device or for the disinfection of medical devices.

Source

Related Articles


Latest Articles

  • ESA has Identified Increasing Safety Concern Surrounding Meter Base Installations

    ESA has Identified Increasing Safety Concern Surrounding Meter Base Installations

    April 18, 2025 ESA and EFC are raising awareness on an increasing safety concern the ESA has identified surrounding meter base installations. ESA identified an increase of installed meter bases where the neutral block is isolated from the enclosure. According to OESC Rule 10-210 a bonding conductor must be installed between the meter base and… Read More…

  • Non-residential Construction Investment Continues to Reach Record Highs in January 2025

    Non-residential Construction Investment Continues to Reach Record Highs in January 2025

    April 18, 2025 Overall, investment in building construction rose 1.8% (+$393.7 million) to $22.1 billion in January. The residential sector increased 2.3% to $15.4 billion, while the non-residential sector was up 0.8% to $6.7 billion. Year over year, investment in building construction grew 5.7% in January. On a constant dollar basis (2017=100), investment in building construction increased 1.5% from the previous month to $13.2 billion… Read More…

  • BC Non-Residential Drives Growth, Multi-Family Component Drives Residential Decline in February Building Permits

    BC Non-Residential Drives Growth, Multi-Family Component Drives Residential Decline in February Building Permits

    April 18, 2025 In February, the total value of building permits issued in Canada increased by $371.3 million (+2.9%) to $13.1 billion. Gains in construction intentions were led by British Columbia’s non-residential sector. On a constant dollar basis (2017=100), the total value of building permits issued in February grew 3.2% from the previous month and was up 5.6% on… Read More…

  • Navigating Tariffs: Practical Strategies for ECABC Members

    Navigating Tariffs: Practical Strategies for ECABC Members

    April 18, 2025 Canadian businesses are facing uncertain and unprecedented risks created by tariffs on Canadian goods from the United States. The combination of the economic impact to BC’s economy from these tariffs, and the potential increase in the cost of construction materials and equipment as Canada is forced to respond with retaliatory tariffs, has… Read More…


Changing Scene

  • Ontario Introduces Legistlation to Unlock Trade and Labour Mobility Within Canada

    Ontario Introduces Legistlation to Unlock Trade and Labour Mobility Within Canada

    April 18, 2025 As a next step in its plan to protect Ontario by unleashing the province’s economy, the Ontario government is introducing the Protect Ontario through Free Trade within Canada Act to unlock free trade and labour mobility within Canada. This legislation will, if passed, create new opportunities for job creation and investment attraction, supporting economic… Read More…

  • Ontario, P.E.I. Join Nova Scotia With Legislation to Remove Internal Trade Barriers

    Ontario, P.E.I. Join Nova Scotia With Legislation to Remove Internal Trade Barriers

    April 18, 2025 Prince Edward Island and Ontario have joined the Nova Scotia by introducing reciprocal legislation that will help foster an environment of mutual recognition of goods, services and labour mobility between these provinces. “Leaders across the country are expressing interest in removing trade barriers, and I’m very pleased that P.E.I. and Ontario have… Read More…

  • New Brunswick Signs MOU with Ontario to Reduce Trade and Labour Mobility Barriers

    New Brunswick Signs MOU with Ontario to Reduce Trade and Labour Mobility Barriers

    April 18, 2025 The governments of New Brunswick and Ontario have signed a memorandum of understanding on free trade and labour mobility. “Ontario is New Brunswick’s second-biggest trading partner, and we are excited to be building on the positive momentum to reduce internal trade barriers across Canada,” said Premier Susan Holt. “Today’s signing of this… Read More…

  • EFC Welcomes New Manufacturer Member: MegaResistors Corp.

    EFC Welcomes New Manufacturer Member: MegaResistors Corp.

    April 18, 2025 Founded in 2008, MegaResistors is a proudly Canadian company specializing in the design and production of high-quality power resistors, including grounding resistors, braking resistors and resistive load banks, tailored for demanding industry and mission critical applications. Their extensive line of products helps them meet the needs of the industry, from crane control… Read More…