Mar 3, 2021
Join the Electricity Distributors Association (EDA) on March 23 for a virtual session during which noted experts will deliver actionable insights on current issues, and best practices relevant to one of the most important priorities and performance metrics for LDCs.
Date: Tuesday March 23, 2021
Webinar: Registrants will receive login details after online registration is completed
Cost:
Members $70+ HST
Non-Members $90 + HST
Go HERE to register
Have you ever been called to fix the work of a 'handyman'?
"Was supposedly done by a"certified ' electrician....told the homeowner that he got a $266 permit....no record at TSBC. Can you count the deficiencies?"
"There is a second panel change in the triplex also.......even more deficiencies. Think the guy was a glorified handyman. Ones not obvious: 240 BB heat hooked up 120....drier on 2p20....range on 2p50....water heater fed with 2c14 Bx on 2p15."
Go HERE to join the discussion
It's April, which means it's time for you to ignite your competitive spark with the a new challenge from IDEAL Nationals Canada. This month, IDEAL is asking you to show off your electrical knowledge with the most correct answers.
Five professionals and five apprentice winners will each take home a $100 VISA gift card and forged wire stripper from IDEAL.
By William (Bill) Burr
Section 32 – Fire Alarm Systems, Smoke and Carbon Monoxide Alarms, and Fire Pumps, as outlined in Rule 32-000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, and protection, of
• local fire alarm systems
• permanently connected smoke and carbon monoxide alarms...
By Matthew Payette
A lighting programming and control narrative is a document that is essential to coordinate the design/construction process with a fully realized final architectural product. It defines how lighting will integrate into the space and ultimately how humans will interact with that same space.
Sometimes there is a gap between the initial visions of the designers and the final product. Other times, the final product and operation of the lighting systems is achieved but after much project management distress...
By Keith Sones
I stared at the back of the white office door, the one I would have to pass through again, soon in fact. But I didn’t want to, didn’t feel like I could. Trembling, I desperately wanted to stay right where I was, locked away from the outside world.
I could feel the flush in my face, feeling hotter and sweatier than the cool weather dictated, my hands clammy. When I woke up earlier that morning, a day of excitement, personal satisfaction and adventure had beckoned. Over the course of the past hour my hopes for happiness had diminished to the point where now I felt abject, miserable, and scared. I had no idea what to do next.
• Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind.
• Meets VDE testing standards for protection against arc flash explosion.
• Torque accuracy of +/- 6% for confidence in precise tolerances.
• 33% narrower blade shafts for reaching deep set terminal block fasteners.
• Direct-molded insulation for protection against electrical shock and arc flash explosion.
Plug-and-Play Gimbal System for the DJI Matrice 200 Series and Matrice 300 Offers High-Definition FLIR Thermal Imaging with Zoom Capabilities to Improve Situational Awareness.
The FLIR Vue® TZ20, the first high resolution, dual thermal sensor gimbal purpose-built for the DJI®Matrice 200 Series and Matrice 300 airframes is now available in Canada. Featuring both a narrow-field-of-view and a wide-field-of-view 640x512 resolution FLIR Boson®thermal camera module, the Vue TZ20 offers greater situational awareness with a 20-times digital thermal zoom capability to complete public safety and industrial inspection missions both near and far.
Autodesk, Inc. has announced the worldwide availability of Autodesk Takeoff, a new product that empowers estimators to perform 2D and 3D quantification workflows from a common data environment to increase collaboration, speed and accuracy during the estimation process.
Originally announced at Autodesk University in November 2020, Autodesk Takeoff will join Autodesk Build and Autodesk BIM Collaborate as part of the Autodesk Construction Cloud unified platform. The announcement comes one month after Autodesk Build and Autodesk BIM Collaborate were made available globally for Autodesk Construction Cloud customers.
Like most major events over the last year, the COVID-19 pandemic put serious restrictions on the Ideal National Championships, which annually pits the top electricians from the United States, Canada, Australia, China, and Mexico against each other in skill competitions. Organizers dramatically scaled back this year’s event to comply with health guidelines. But that didn’t stop IBEW members from continuing to dominate.
Elgin, Ill., Local 117 journeyman wireman Greg Anliker, who is sometimes referred to as the Michael Jordan of the competition after winning the individual pro title in three of the previous four years, partnered with San Francisco Local 6 apprentice Noreen Buckley to win the three-team competition...
By Blake Marchand
This past December Jennifer Green was honoured with Canada’s Most Powerful Women Top 100 Award for the Skilled Trades category by WXN (Women’s Executive Network).
“It is truly an honour to be recognized by WXN and to be among this group of amazing women,” said Green of earning the distinction. “Throughout my career, I’ve worked with many great mentors and team members – to them, I say thank you for always inspiring me. I am absolutely thrilled.” Green is an industrial mechanic millwright by trade and works with Skills Ontario as Director of Competitions and Young Women’s Initiatives.
By Owen Hurst
Recently, Electrical Industry Canada has developed a relationship with Women in Renewable Energy (WiRE), a non-for-profit group developing resources and networking potential for women and all working or planning to work within the renewable energy sector. Aside from being the WiRE President & CEO, Joanna Osawe is the Global Business Development Manager of Major Projects for DMC Power Inc.
EIN sat down with Osawe to learn more about WiRE and the substantial benefits it provides. Joanna is very personable and open regarding her career and her ambition, as well as the opportunities she is developing for women nationally and globally.
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/copper-d.gif)
|
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/spot-copper-60d.gif)
|
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/spot-copper-6m.gif)
|
