Contractor Salaries By Company Size
Related Articles
A Short History of Safety Norms For LEDs
What came first: the chicken or the egg? In technical files the answer is simple: first comes the product, then the standard. In 1993, when Nichia introduced the blue LED (based on GaN), the issue of photo biological safety was taken into consideration. The International Electrotechnical Commission (IEC) decided to include LEDs in the laser product category and related norms (IEC 60825). This decision was based on the use of infrared LED in the fibre communication system due to its very narrow band.
Survey Says: Electrical Contractor Employment 2009 – 2014
Employment rose, fell and rose again from 2009 to 2011. Since then, it’s been steady.
Convectair Researchers Participate in the Inter-University Franco-Quebec Symposium (CIFQ) on Thermal Systems
Two researchers at the Convectair Center for Expertise and Training presented their plans for the development of the company’s Klimat -37.5° C bi-climatic chamber as well as the results of their research on thermal comfort and the efficiency of various electric heaters.
Guide to the Canadian Electrical Code, Part 1 – A Road Map: Section 42
Rule 42-000 Scope – states that Section 42is a supplementary or amendatory section of the code and applies to the installation ofelectric welders. The CEC Handbook provides additional notes and diagrams to better explain this section.
EFC Wire & Cable Business Task Group Responds to the Environment & Climate Change Canada’s (ECCC) Proposed Prohibition of Certain Toxic Substances Regulation, 2022
The proposed Prohibition of Certain Toxic Substances Regulation, 2022 will prohibit Canadian manufacturers from the use, sale, and import of decabromodiphenyl ethane (DBDPE) and products containing DBDPE. This chemical compound is widely used as a flame retardant.
Industry Legend Bill Smith Retires
April 4, 2025 By Electro-Federation Canada On March 25, Electrozad, a Sonepar Company, hosted a special retirement reception at Caesars Windsor for industry titan Bill Smith who marked an incredible 50-year career with the company. The reception was held in the elegant Caesars Ballroom, which featured an array of food stations and elegant decor. In…
A Short History of Safety Norms For LEDs
What came first: the chicken or the egg? In technical files the answer is simple: first comes the product, then the standard. In 1993, when Nichia introduced the blue LED (based on GaN), the issue of photo biological safety was taken into consideration. The International Electrotechnical Commission (IEC) decided to include LEDs in the laser product category and related norms (IEC 60825). This decision was based on the use of infrared LED in the fibre communication system due to its very narrow band.
Survey Says: Electrical Contractor Employment 2009 – 2014
Employment rose, fell and rose again from 2009 to 2011. Since then, it’s been steady.
Convectair Researchers Participate in the Inter-University Franco-Quebec Symposium (CIFQ) on Thermal Systems
Two researchers at the Convectair Center for Expertise and Training presented their plans for the development of the company’s Klimat -37.5° C bi-climatic chamber as well as the results of their research on thermal comfort and the efficiency of various electric heaters.
Guide to the Canadian Electrical Code, Part 1 – A Road Map: Section 42
Rule 42-000 Scope – states that Section 42is a supplementary or amendatory section of the code and applies to the installation ofelectric welders. The CEC Handbook provides additional notes and diagrams to better explain this section.
EFC Wire & Cable Business Task Group Responds to the Environment & Climate Change Canada’s (ECCC) Proposed Prohibition of Certain Toxic Substances Regulation, 2022
The proposed Prohibition of Certain Toxic Substances Regulation, 2022 will prohibit Canadian manufacturers from the use, sale, and import of decabromodiphenyl ethane (DBDPE) and products containing DBDPE. This chemical compound is widely used as a flame retardant.
Industry Legend Bill Smith Retires
April 4, 2025 By Electro-Federation Canada On March 25, Electrozad, a Sonepar Company, hosted a special retirement reception at Caesars Windsor for industry titan Bill Smith who marked an incredible 50-year career with the company. The reception was held in the elegant Caesars Ballroom, which featured an array of food stations and elegant decor. In…
A Short History of Safety Norms For LEDs
What came first: the chicken or the egg? In technical files the answer is simple: first comes the product, then the standard. In 1993, when Nichia introduced the blue LED (based on GaN), the issue of photo biological safety was taken into consideration. The International Electrotechnical Commission (IEC) decided to include LEDs in the laser product category and related norms (IEC 60825). This decision was based on the use of infrared LED in the fibre communication system due to its very narrow band.
Survey Says: Electrical Contractor Employment 2009 – 2014
Employment rose, fell and rose again from 2009 to 2011. Since then, it’s been steady.
Convectair Researchers Participate in the Inter-University Franco-Quebec Symposium (CIFQ) on Thermal Systems
Two researchers at the Convectair Center for Expertise and Training presented their plans for the development of the company’s Klimat -37.5° C bi-climatic chamber as well as the results of their research on thermal comfort and the efficiency of various electric heaters.
Guide to the Canadian Electrical Code, Part 1 – A Road Map: Section 42
Rule 42-000 Scope – states that Section 42is a supplementary or amendatory section of the code and applies to the installation ofelectric welders. The CEC Handbook provides additional notes and diagrams to better explain this section.
EFC Wire & Cable Business Task Group Responds to the Environment & Climate Change Canada’s (ECCC) Proposed Prohibition of Certain Toxic Substances Regulation, 2022
The proposed Prohibition of Certain Toxic Substances Regulation, 2022 will prohibit Canadian manufacturers from the use, sale, and import of decabromodiphenyl ethane (DBDPE) and products containing DBDPE. This chemical compound is widely used as a flame retardant.
Industry Legend Bill Smith Retires
April 4, 2025 By Electro-Federation Canada On March 25, Electrozad, a Sonepar Company, hosted a special retirement reception at Caesars Windsor for industry titan Bill Smith who marked an incredible 50-year career with the company. The reception was held in the elegant Caesars Ballroom, which featured an array of food stations and elegant decor. In…
Latest Articles
-
Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara
By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
Changing Scene
-
Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity
June 13, 2025 Eaton, and Siemens Energy have announced a fast-track approach to building data centers with integrated onsite power. They will address urgent market needs by offering reliable grid-independent energy supplies and standardized modular systems to facilitate swift data center construction and deployment. The collaboration will enable simultaneous construction of data centers and associated… Read More…
-
Latest Social Media Challenge Puts Students at Risk of Electrical Shock
June 13, 2025 The Electrical Safety Authority (ESA) is warning Ontarians that a shocking new social media trend is putting students at risk of serious electrical injury including shock, burns or even fires. A pair of dangerous social media trends have been gaining interest from students. One has kids “challenging” each other to stick a… Read More…
-
Plan Group Announce New VP of Electrical
June 13, 2025 Plan Group are proud to announce the promotion of Dave Scott as Vice President of Electrical. Dave has been a key part of Plan Group’s success for the last 16 years, leading with drive, accountability, and a deep understanding of what it takes to get the job done right. He will now… Read More…
-
Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26
June 13, 2025 On Monday, May 26, 2025, Electro-Federation Canada (EFC) held its Annual General Meeting, which included an update on key initiatives, the welcoming of a new Chair, and the election of the 2025-2026 Board of Directors. EFC President & CEO Carol McGlogan shared key highlights from the past year and provided a summary of the… Read More…
