Survey Says: Who Industrial Electricians Work For
Related Articles
Ontario Construction is Looking Up: Annual OCS Survey sees Positive Outlook from Contractors
March 3, 2023 The annual OCS Survey found that more than eight-in-10 Ontario contractors are feeling good about their business prospects this year. According to the Ontario Construction Secretariat’s annual Contractor Survey, 81 per cent of respondents think their business prospects for 2023 will either stay the same (49 per cent) or improve (32 per…
Paper Mill Migrates to Modern DCS
For most, the answer is, “No time is a good time.” The real question becomes, how long can your aging DCS limp along before an upgrade is unavoidable?
Union Training and Innovation Program Call for Proposals Now Open
The Government of Canada has announced the Call for Proposals for the Union Training and Innovation Program (UTIP) – an initiative under the Canadian Apprenticeship Strategy – is now open from August 31 until October 12.
IoT Enabled Smart Buildings & Data Driven Insights with Enlighted CEO, Stefan Schwab
CEO Stefan Schwab joined Enlighted in 2018 after spending time as Execuative GM for Siemens Building Technologies in Austrailia and New Zealand. In the below Q&A, Stefan provides insight into his perspective on IoT enabled smart buildings…
Guide to the Canadian Electrical Code, Part I
Section 26 is a general section of the code and applies to the installation of all electrical equipment. Appendix B contains important additional helpful notes. This section is divided into a number of parts, with the general rules 26-002 to 26-014 applying to all electrical equipment and additional parts for specific types of equipment.
Ontario Construction is Looking Up: Annual OCS Survey sees Positive Outlook from Contractors
March 3, 2023 The annual OCS Survey found that more than eight-in-10 Ontario contractors are feeling good about their business prospects this year. According to the Ontario Construction Secretariat’s annual Contractor Survey, 81 per cent of respondents think their business prospects for 2023 will either stay the same (49 per cent) or improve (32 per…
Paper Mill Migrates to Modern DCS
For most, the answer is, “No time is a good time.” The real question becomes, how long can your aging DCS limp along before an upgrade is unavoidable?
Union Training and Innovation Program Call for Proposals Now Open
The Government of Canada has announced the Call for Proposals for the Union Training and Innovation Program (UTIP) – an initiative under the Canadian Apprenticeship Strategy – is now open from August 31 until October 12.
IoT Enabled Smart Buildings & Data Driven Insights with Enlighted CEO, Stefan Schwab
CEO Stefan Schwab joined Enlighted in 2018 after spending time as Execuative GM for Siemens Building Technologies in Austrailia and New Zealand. In the below Q&A, Stefan provides insight into his perspective on IoT enabled smart buildings…
Guide to the Canadian Electrical Code, Part I
Section 26 is a general section of the code and applies to the installation of all electrical equipment. Appendix B contains important additional helpful notes. This section is divided into a number of parts, with the general rules 26-002 to 26-014 applying to all electrical equipment and additional parts for specific types of equipment.
Ontario Construction is Looking Up: Annual OCS Survey sees Positive Outlook from Contractors
March 3, 2023 The annual OCS Survey found that more than eight-in-10 Ontario contractors are feeling good about their business prospects this year. According to the Ontario Construction Secretariat’s annual Contractor Survey, 81 per cent of respondents think their business prospects for 2023 will either stay the same (49 per cent) or improve (32 per…
Paper Mill Migrates to Modern DCS
For most, the answer is, “No time is a good time.” The real question becomes, how long can your aging DCS limp along before an upgrade is unavoidable?
Union Training and Innovation Program Call for Proposals Now Open
The Government of Canada has announced the Call for Proposals for the Union Training and Innovation Program (UTIP) – an initiative under the Canadian Apprenticeship Strategy – is now open from August 31 until October 12.
IoT Enabled Smart Buildings & Data Driven Insights with Enlighted CEO, Stefan Schwab
CEO Stefan Schwab joined Enlighted in 2018 after spending time as Execuative GM for Siemens Building Technologies in Austrailia and New Zealand. In the below Q&A, Stefan provides insight into his perspective on IoT enabled smart buildings…
Guide to the Canadian Electrical Code, Part I
Section 26 is a general section of the code and applies to the installation of all electrical equipment. Appendix B contains important additional helpful notes. This section is divided into a number of parts, with the general rules 26-002 to 26-014 applying to all electrical equipment and additional parts for specific types of equipment.
Latest Articles
-
New STANDATA Interpretation & Variance: Use of Neutral Conductors in Consumer’s Service Reporting of Electrical Incidents
October 6, 2025 There are two new STANDATA releases for the province of Alberta: The purpose of these two releases is to clarify requirements for reporting electrical incidents in Alberta and to permit the use of underground service entrance cable (USEB) with a bare neutral conductor in underground installations at service entrance equipment. STANDATA variance… Read More…
-
BizEnergySaver Program Available in Toronto & Ottawa
October 6, 2025 Commercial buildings in Ottawa and Toronto’s Richview South area can receive direct installation and instant discounts on energy-saving equipment upgrades for lasting benefits. The Save on Energy BizEnergySaver program is designed to help industrial, commercial and institutional (ICI), and multi-residential building owners and operators make equipment improvements to reduce their energy consumption…. Read More…
-
Electrical Industry Day of Recognition – October 6, 2025: John’s Story
October 6, 2025 The Electrical Injury Day of Recognition is sponsored by the Electrical Contractors Association of Alberta, the Canadian Electrical Contractors Association, the Electrical Contractors Association of British Columbia, and the National Electrical Trade Council. The Canadian electrical industry is calling on all tradespeople and those who benefit from them, to set aside October 6 as a day… Read More…
-
Research Report: Visible and Invisible Consequences of Electrical Injury
October 6, 2025 This report was produced by the Infrastructure Health & Safety Association (ISHA). You can find the report, as well as sources on their website. This report has been written by Dr. Manuel Gomez, director of the St. John’s Rehab Research Program at Sunnybrook Health Sciences Centre in Toronto. Electricity is an important… Read More…
Changing Scene
-
Ontario Takes Next Step in Bowmanville Hospital Expansion
October 6, 2025 The Ontario government is marking a key milestone in delivering high-quality hospital care for families in Durham Region by issuing a Request for Proposals (RFP) to select the team that will lead the expansion and revitalization of Lakeridge Health’s Bowmanville Hospital. This project will mark one of the largest redevelopments at Lakeridge… Read More…
-
Nova Scotia Takes Further Steps to Unlock Development in Halifax
October 6, 2025 Nova Scotia is taking more action to support housing growth in Halifax Regional Municipality (HRM), issuing new orders and moving policies forward. The measures include Municipal Affairs Minister John Lohr designating HRM as an interim planning area. Under this order, new minimum planning requirements for HRM take effect immediately. The designation also enables… Read More…
-
E.B. Horsman & Son Announces Stephen Murray as New Calgary Branch Manager
October 6, 2025 EB Horsman & Son is pleased to announce the appointment of Stephen Murray as Branch Manager of its Calgary location, effective Tuesday, September 3, 2025. Stephen Murray brings over two decades of experience in the industrial automation sector, where he has built a strong reputation for driving growth, expanding market presence, and… Read More…
-
E.B. Horsman & Son Announces Maxim Laberge as New Process Instrumentation Manager
October 6, 2025 EB Horsman is excited to welcome Maxim Laberge as its new Process Instrumentation Manager. Maxim Laberge brings over 25 years of experience in electrical, instrumentation, and control systems, with a proven record in business development, client engagement, and strategic project leadership. He is known for his consultative approach, combining technical insight with… Read More…
