Electrical Contractors’ Salaries by Company Size, 2014-2015

Southampton, ON is the home of Kuehl Electric. A licensed electrician in the province of Ontario Kuehl Electric is a fully insured, licensed and authorized Electrical Safety Authority contractor. They install stand-by and portable generators, as well as supply and install electrical material with a focus on exceeding electrical code-compliant work.
An overhead and underground utility contractor has pleaded guilty and has been fined $80,000 after two workers suffered burns while working on electrical equipment that had not been properly shut off. The incident occurred at a Toronto condo building in February 2014. The two workers were from Powerline Plus, which was under contract to Toronto Hydro.
May 3, 2024 Retrofitting Canada’s residential, commercial, and institutional building stock to incorporate sustainable fuel sources, technologies, and materials could require as many as 57,000 additional construction workers and generate more than $81 billion in new construction investments by 2032. A new report prepared by BuildForce Canada, Building a Greener Future: Estimating the impact on construction…
Changes in the CSA Z462 Workplace electrical safety standard are slowing down. Good news! The 2021 edition will see significant reorganization of content in Clause 4.1, changes to existing annexes, some new annexes and a significant change to the arc flash PPE category method of determining “additional protective measures” for a work task’s arc flash risk assessment are included in the 2021 edition.
November 4, 2024 The Canadian Board for Harmonized Construction Codes (CBHCC) is inviting code users, interested parties, and the broader public to take part in the next public review of proposed changes to the 2020 editions of the National Model Codes. The public review runs from October 21 to December 19, 2024. Those interested in…
Southampton, ON is the home of Kuehl Electric. A licensed electrician in the province of Ontario Kuehl Electric is a fully insured, licensed and authorized Electrical Safety Authority contractor. They install stand-by and portable generators, as well as supply and install electrical material with a focus on exceeding electrical code-compliant work.
An overhead and underground utility contractor has pleaded guilty and has been fined $80,000 after two workers suffered burns while working on electrical equipment that had not been properly shut off. The incident occurred at a Toronto condo building in February 2014. The two workers were from Powerline Plus, which was under contract to Toronto Hydro.
May 3, 2024 Retrofitting Canada’s residential, commercial, and institutional building stock to incorporate sustainable fuel sources, technologies, and materials could require as many as 57,000 additional construction workers and generate more than $81 billion in new construction investments by 2032. A new report prepared by BuildForce Canada, Building a Greener Future: Estimating the impact on construction…
Changes in the CSA Z462 Workplace electrical safety standard are slowing down. Good news! The 2021 edition will see significant reorganization of content in Clause 4.1, changes to existing annexes, some new annexes and a significant change to the arc flash PPE category method of determining “additional protective measures” for a work task’s arc flash risk assessment are included in the 2021 edition.
November 4, 2024 The Canadian Board for Harmonized Construction Codes (CBHCC) is inviting code users, interested parties, and the broader public to take part in the next public review of proposed changes to the 2020 editions of the National Model Codes. The public review runs from October 21 to December 19, 2024. Those interested in…
Southampton, ON is the home of Kuehl Electric. A licensed electrician in the province of Ontario Kuehl Electric is a fully insured, licensed and authorized Electrical Safety Authority contractor. They install stand-by and portable generators, as well as supply and install electrical material with a focus on exceeding electrical code-compliant work.
An overhead and underground utility contractor has pleaded guilty and has been fined $80,000 after two workers suffered burns while working on electrical equipment that had not been properly shut off. The incident occurred at a Toronto condo building in February 2014. The two workers were from Powerline Plus, which was under contract to Toronto Hydro.
May 3, 2024 Retrofitting Canada’s residential, commercial, and institutional building stock to incorporate sustainable fuel sources, technologies, and materials could require as many as 57,000 additional construction workers and generate more than $81 billion in new construction investments by 2032. A new report prepared by BuildForce Canada, Building a Greener Future: Estimating the impact on construction…
Changes in the CSA Z462 Workplace electrical safety standard are slowing down. Good news! The 2021 edition will see significant reorganization of content in Clause 4.1, changes to existing annexes, some new annexes and a significant change to the arc flash PPE category method of determining “additional protective measures” for a work task’s arc flash risk assessment are included in the 2021 edition.
November 4, 2024 The Canadian Board for Harmonized Construction Codes (CBHCC) is inviting code users, interested parties, and the broader public to take part in the next public review of proposed changes to the 2020 editions of the National Model Codes. The public review runs from October 21 to December 19, 2024. Those interested in…
May 14, 2025 With over 40 years of field experience, electrical contractor Guy St-Amour developed an innovative product that led to the founding of Boîtiers STA. In 2011, a special request for a safe outlet for an 800-amp mobile load bank resulted in the prototype for a line of custom-made boxes designed for quick and… Read More…
Rule 34-000 Scope, this is a supplementary or amendatory section of the code and applies to incandescent lamps, fluorescent lamps, high-voltage luminous discharge (cold-cathode or neon) tubes, high-intensity discharge lamps and other light-emitting sources such as LEDs. Read More…
May 5, 2025 Sensors designed for industrial applications often face harsh conditions, including extreme temperatures, high humidity, exposure to chemicals, and the presence of combustible gases or dust. Two common classifications for sensors used in such environments are hazardous environment sensors and intrinsically safe sensors. While they share some overlap, they serve different purposes and… Read More…
May 5, 2025 By Krystie Johnston Teledyne FLIR OEM launched their Thermal by FLIR about six years ago, to expand support for original equipment manufacturers (OEMs) who integrate FLIR thermal camera technology into their products. Since then, these collaborations have taken thermal into completely new spaces. Mike Walters, Vice President of Emerging Product Management at FLIR… Read More…
May 12, 2025 Hammond Power Solutions (HPS), a leader in dry-type transformers and power quality solutions, is pleased to announce the appointment of Linda Nadeau Sanford as the new Western Regional Sales Manager. Linda will play a key part in driving sales and revenue across the Western Canada region. She will oversee territory management, advance… Read More…
May 12, 2025 Electricity Human Resources Canada (EHRC) is proud to announce Susanna Zagar (she/her), Chief Executive Officer of the Ontario Energy Board (OEB), as the recipient of the 2025 Agent of Change Award. This recognition celebrates Ms. Zagar’s remarkable leadership and commitment to diversity, equity and inclusion (DEI) in the electricity sector. Since stepping… Read More…
May 12, 2025 AD reports that member sales in the first three months of 2025 increased 23% to a record $24 billion across the group’s 14 divisions and three countries. AD welcomed over 550 new members in the first quarter through both organic growth and the IMARK Electrical merger. AD members also acquired another 10… Read More…
May 12, 2025 Legrand® has announced the launch of the Wattstopper i3 Platform, a next-generation lighting and building intelligence solution powered by KODE Labs, a global leader of advanced smart building technology. The partnership positions Legrand to lead the lighting controls industry into a new era of unified experiences, seamless integrations, and data-driven control, making it easier… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.