Survey Says: Why Industrial Non OEMs Buy
Related Articles
Worthwhile Things Are Hard to Do
I was about 12 years old when I did the most physically demanding thing of my life. As in my whole life, to this day. That was 45 years ago and nothing I’ve done since was more difficult. I’ve run up mountains, competed in triathlons and run ultramarathons, so I consider the bar to be relatively high.
Why Doesn’t the Label Include Information on Colour Shift and Replaceable Parts?
There are no standard test procedures for colour shift and no standard definition on what are replaceable parts for SSL luminaires and lamps. The LED Lighting Facts program strives to provide data that can be substantiated by industry approved testing methods, whenever possible.
Watt’s the Word on the Upcoming IDEAL National Championship
The IDEAL National Championship is a chance for Electricians from all over to go head-to-head to take home major bragging rights and win over $600,000 in cash and prizes.
The Inaugural EFC Award of Excellence Presented to Keith Rodel, Hubbell Canada
November 29, 2022 On November 10, 2022, Keith Rodel, from Hubbell Canada, was presented with the first EFC Award of Excellence. This award is a peer recognition to a retired member of the Electro-Federation of Canada who has made an outstanding contribution to the industry in standards and regulations. Hubbell Canada’s Frank Magisano, Director of…
Energized Electrical Work Permit YES or NO?
All energized electrical work tasks performed require an Energized Electrical Work Permit (EEWP) to be issued, unless exempted as outlined in the CSA Z462 Workplace electrical safety Standard, Clause 4.3 Work Involving Electrical Hazards.
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits
Although Section 16 is a general section of the Code, the Scope applies specifically to remote control, signal circuits, Class 2 power and data communication circuits connecting power sourcing equipment and powered devices, and voltage or energy limited circuits installed in accordance with the requirements of the Code, unless amended or modified by other sections.
Worthwhile Things Are Hard to Do
I was about 12 years old when I did the most physically demanding thing of my life. As in my whole life, to this day. That was 45 years ago and nothing I’ve done since was more difficult. I’ve run up mountains, competed in triathlons and run ultramarathons, so I consider the bar to be relatively high.
Why Doesn’t the Label Include Information on Colour Shift and Replaceable Parts?
There are no standard test procedures for colour shift and no standard definition on what are replaceable parts for SSL luminaires and lamps. The LED Lighting Facts program strives to provide data that can be substantiated by industry approved testing methods, whenever possible.
Watt’s the Word on the Upcoming IDEAL National Championship
The IDEAL National Championship is a chance for Electricians from all over to go head-to-head to take home major bragging rights and win over $600,000 in cash and prizes.
The Inaugural EFC Award of Excellence Presented to Keith Rodel, Hubbell Canada
November 29, 2022 On November 10, 2022, Keith Rodel, from Hubbell Canada, was presented with the first EFC Award of Excellence. This award is a peer recognition to a retired member of the Electro-Federation of Canada who has made an outstanding contribution to the industry in standards and regulations. Hubbell Canada’s Frank Magisano, Director of…
Energized Electrical Work Permit YES or NO?
All energized electrical work tasks performed require an Energized Electrical Work Permit (EEWP) to be issued, unless exempted as outlined in the CSA Z462 Workplace electrical safety Standard, Clause 4.3 Work Involving Electrical Hazards.
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits
Although Section 16 is a general section of the Code, the Scope applies specifically to remote control, signal circuits, Class 2 power and data communication circuits connecting power sourcing equipment and powered devices, and voltage or energy limited circuits installed in accordance with the requirements of the Code, unless amended or modified by other sections.
Worthwhile Things Are Hard to Do
I was about 12 years old when I did the most physically demanding thing of my life. As in my whole life, to this day. That was 45 years ago and nothing I’ve done since was more difficult. I’ve run up mountains, competed in triathlons and run ultramarathons, so I consider the bar to be relatively high.
Why Doesn’t the Label Include Information on Colour Shift and Replaceable Parts?
There are no standard test procedures for colour shift and no standard definition on what are replaceable parts for SSL luminaires and lamps. The LED Lighting Facts program strives to provide data that can be substantiated by industry approved testing methods, whenever possible.
Watt’s the Word on the Upcoming IDEAL National Championship
The IDEAL National Championship is a chance for Electricians from all over to go head-to-head to take home major bragging rights and win over $600,000 in cash and prizes.
The Inaugural EFC Award of Excellence Presented to Keith Rodel, Hubbell Canada
November 29, 2022 On November 10, 2022, Keith Rodel, from Hubbell Canada, was presented with the first EFC Award of Excellence. This award is a peer recognition to a retired member of the Electro-Federation of Canada who has made an outstanding contribution to the industry in standards and regulations. Hubbell Canada’s Frank Magisano, Director of…
Energized Electrical Work Permit YES or NO?
All energized electrical work tasks performed require an Energized Electrical Work Permit (EEWP) to be issued, unless exempted as outlined in the CSA Z462 Workplace electrical safety Standard, Clause 4.3 Work Involving Electrical Hazards.
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 16 Class 1 and Class 2 Circuits
Although Section 16 is a general section of the Code, the Scope applies specifically to remote control, signal circuits, Class 2 power and data communication circuits connecting power sourcing equipment and powered devices, and voltage or energy limited circuits installed in accordance with the requirements of the Code, unless amended or modified by other sections.
Latest Articles
-
Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara
By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
Changing Scene
-
Eaton and Siemens Energy Partner to Provide Power and Technology to Accelerate New Data Center Capacity
June 13, 2025 Eaton, and Siemens Energy have announced a fast-track approach to building data centers with integrated onsite power. They will address urgent market needs by offering reliable grid-independent energy supplies and standardized modular systems to facilitate swift data center construction and deployment. The collaboration will enable simultaneous construction of data centers and associated… Read More…
-
Latest Social Media Challenge Puts Students at Risk of Electrical Shock
June 13, 2025 The Electrical Safety Authority (ESA) is warning Ontarians that a shocking new social media trend is putting students at risk of serious electrical injury including shock, burns or even fires. A pair of dangerous social media trends have been gaining interest from students. One has kids “challenging” each other to stick a… Read More…
-
Plan Group Announce New VP of Electrical
June 13, 2025 Plan Group are proud to announce the promotion of Dave Scott as Vice President of Electrical. Dave has been a key part of Plan Group’s success for the last 16 years, leading with drive, accountability, and a deep understanding of what it takes to get the job done right. He will now… Read More…
-
Electro-Federation Canada Announces New Chair and Board of Directors for 2025-26
June 13, 2025 On Monday, May 26, 2025, Electro-Federation Canada (EFC) held its Annual General Meeting, which included an update on key initiatives, the welcoming of a new Chair, and the election of the 2025-2026 Board of Directors. EFC President & CEO Carol McGlogan shared key highlights from the past year and provided a summary of the… Read More…
