Types of Projects Consulting Engineers Work On
Related Articles
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 22](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 22
Rule 22-000 outlinesthe Scope of Section 22 and that it amends or supplements the general requirements of the code. It provides specific rules for locations classified as Category 1 (moisture) or Category 2 (corrosive) environments that are significant enough to interfere with normal operation of electrical equipment.
Building a New Power Line Gave BC crews a Chance to Shine
Foreman Bill Dalling can’t imagine doing anything else but working in the line trade. His crews worked on slopes of up to 30% grade capable of snapping chains or towing straps securing heavy loads. And then there was the spring thaw, where snow turned to mud “thick like gumbo.”But to hear Dalling describe it, building a new transmission line is about as good as it gets, at least for someone who’s made a career out of building power lines.
Growing your Business and Dealing with the Growing Pains, Part 1: HR Policies
By Michelle Branigan
Business is good, the orders are rolling in, and you’ve hired enough staff to keep up with demand. When business is going well it can be an invigorating and exciting time for all employees — those who have been around for quite a few years and those who are just kicking off their careers, perhaps are even in their first job.
Littelfuse Paper Examines Electrical Shock Hazards and Prevention Through Design with GFCIs
Littelfuse, Inc., has released the technical paper “Prevention Through Design with Special-Purpose Ground-Fault Circuit Interrupters (GFCIs)” describing the hazards of electrical shock and the best prevention methods and products that help keep workers safe from serious injuries and death caused by electrical shock.
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 22
Rule 22-000 outlinesthe Scope of Section 22 and that it amends or supplements the general requirements of the code. It provides specific rules for locations classified as Category 1 (moisture) or Category 2 (corrosive) environments that are significant enough to interfere with normal operation of electrical equipment.
Building a New Power Line Gave BC crews a Chance to Shine
Foreman Bill Dalling can’t imagine doing anything else but working in the line trade. His crews worked on slopes of up to 30% grade capable of snapping chains or towing straps securing heavy loads. And then there was the spring thaw, where snow turned to mud “thick like gumbo.”But to hear Dalling describe it, building a new transmission line is about as good as it gets, at least for someone who’s made a career out of building power lines.
Growing your Business and Dealing with the Growing Pains, Part 1: HR Policies
By Michelle Branigan
Business is good, the orders are rolling in, and you’ve hired enough staff to keep up with demand. When business is going well it can be an invigorating and exciting time for all employees — those who have been around for quite a few years and those who are just kicking off their careers, perhaps are even in their first job.
Littelfuse Paper Examines Electrical Shock Hazards and Prevention Through Design with GFCIs
Littelfuse, Inc., has released the technical paper “Prevention Through Design with Special-Purpose Ground-Fault Circuit Interrupters (GFCIs)” describing the hazards of electrical shock and the best prevention methods and products that help keep workers safe from serious injuries and death caused by electrical shock.
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 22
Rule 22-000 outlinesthe Scope of Section 22 and that it amends or supplements the general requirements of the code. It provides specific rules for locations classified as Category 1 (moisture) or Category 2 (corrosive) environments that are significant enough to interfere with normal operation of electrical equipment.
Building a New Power Line Gave BC crews a Chance to Shine
Foreman Bill Dalling can’t imagine doing anything else but working in the line trade. His crews worked on slopes of up to 30% grade capable of snapping chains or towing straps securing heavy loads. And then there was the spring thaw, where snow turned to mud “thick like gumbo.”But to hear Dalling describe it, building a new transmission line is about as good as it gets, at least for someone who’s made a career out of building power lines.
Growing your Business and Dealing with the Growing Pains, Part 1: HR Policies
By Michelle Branigan
Business is good, the orders are rolling in, and you’ve hired enough staff to keep up with demand. When business is going well it can be an invigorating and exciting time for all employees — those who have been around for quite a few years and those who are just kicking off their careers, perhaps are even in their first job.
Littelfuse Paper Examines Electrical Shock Hazards and Prevention Through Design with GFCIs
Littelfuse, Inc., has released the technical paper “Prevention Through Design with Special-Purpose Ground-Fault Circuit Interrupters (GFCIs)” describing the hazards of electrical shock and the best prevention methods and products that help keep workers safe from serious injuries and death caused by electrical shock.
Latest Articles
-
Video: ABB Installation Products Proudly Powering Canada
April 7, 2024 From coast to coast, ABB Installation Products is built by Canadians, for Canadians—delivering high-quality solutions that power industries and support communities across the country. Read More…
-
Code Quiz: Section 26 – Installation of Electrical Equipment
April 7, 2025 By Bill Burr Section 26 – Installation of Electrical Equipment Receptacles Question: Rule 26-706 specifies that all receptacles of CSA configuration 5-15R and 5-20R installed in: …must have a particular feature, what is this feature? Source: CSA C22.1:24, Canadian Electrical Code, Part 1 – Safety Standard for Electrical Installations. © 2021 Canadian… Read More…
-
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 32](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 32
Section 32, as outlined in rule 32 -000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, and protection, of fire alarm systems… Read More…
-
Alberta Municipalities EV Charging Installation Rebate
April 4, 2025 Alberta Municipalities are proud to provide financial rebates for applicants to purchase and install electric vehicle charging stations in Alberta as part of the Electric Vehicle Charging Program (EVCP), funded by Natural Resources Canada (NRCan) & Alberta Municipalities. The funding will cover up to 46% of your total project cost, which can… Read More…
Changing Scene
-
Hubbell Announces Promotion of Frank Magisano to VP & GM of Hubbell Canada
April 7, 2025 Hubbell has announced the promotion of Frank Magisano to the position of Vice President & General Manager of Hubbell Canada. “I am truly honored and humbled to accept the role of Vice President and General Manager of Hubbell Canada. With the greatest of respect and admiration, Kevin Mallory has left a legacy of… Read More…
-
NSAA Fee Change Effective April 1, 2025
As of April 1, 2025, the Nova Scotia Apprenticeship Agency’s fees have changed due to the 1% reduction in HST in Nova Scotia. NSAA noted on their website that due to the number of references across various pages, you may still come across old fee amounts as they work through updating their website. Here is… Read More…
-
Nominations Open for 2024 NETCO Leadership Excellence Award
Established in 2016, the NETCO Leadership Excellence award honours an industry training professional for his/her role for the success and their outstanding contributions to apprenticeship training and continuing electrical training. Read More…
-
Munded Partners with Kane Test Equipment in Atlantic Canada
April 4, 2025 Munden Enterprises has announced a partnership with Kane Test Equipment to bring their test and measurement solutions to Atlantic Canada. “We are now excited to announce a new and promising partnership with Kane Test Equipment. Kane Test Equipment brings innovative solutions that align with our dedication to providing the best tools for… Read More…
