Survey Says: Where Electricians Work (Excluding Industrial and Power Sectors)

April 26, 2024 The City of Winnipeg’s Planning, Property & Development Department will implement zoning bylaw updates in phases, starting with development permit exemptions. Recent bylaw amendments, approved on March 21, 2024, grant the PP&D Director authority to determine the need for a development permit. These exemptions aim to streamline the permit process for projects…
January 23, 2024 This article is a summary from the Technical Q&A as part of ESA’s Annual General Meeting, held on November 22, 2023. The Technical Q&A is hosted by ESA Technical Advisor Keith Bartlett working with Technical Advisors, Diana Madill, Trevor Tremblay, Robert Mitchell, and Darrin Smith to answer questions pre-submitted by LECs. The…
Contractors dominate the electrical product purchasing market with 48%, over twice the next closest market, Industrial, OEM and Automation which makes up 23% of Full-Line electrical customers.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
February 6, 2023 By: Blake Marchand There are several factors that have led to uncertainty when it comes to material availability and product prices fluctuation in the electrical market. Primarily, those factors stem from global events that influence the broader market – the value and demand of raw materials, the cost of shipping, the cost…
A little over a decade ago, the introduction of LED lighting seemed to transform commercial lighting overnight. Now we’re seeing it happen again. This time, connectivity and big data are driving the change, creating a profound shift in how new commercial lighting is evaluated, specified and approved.
April 26, 2024 The City of Winnipeg’s Planning, Property & Development Department will implement zoning bylaw updates in phases, starting with development permit exemptions. Recent bylaw amendments, approved on March 21, 2024, grant the PP&D Director authority to determine the need for a development permit. These exemptions aim to streamline the permit process for projects…
January 23, 2024 This article is a summary from the Technical Q&A as part of ESA’s Annual General Meeting, held on November 22, 2023. The Technical Q&A is hosted by ESA Technical Advisor Keith Bartlett working with Technical Advisors, Diana Madill, Trevor Tremblay, Robert Mitchell, and Darrin Smith to answer questions pre-submitted by LECs. The…
Contractors dominate the electrical product purchasing market with 48%, over twice the next closest market, Industrial, OEM and Automation which makes up 23% of Full-Line electrical customers.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
February 6, 2023 By: Blake Marchand There are several factors that have led to uncertainty when it comes to material availability and product prices fluctuation in the electrical market. Primarily, those factors stem from global events that influence the broader market – the value and demand of raw materials, the cost of shipping, the cost…
A little over a decade ago, the introduction of LED lighting seemed to transform commercial lighting overnight. Now we’re seeing it happen again. This time, connectivity and big data are driving the change, creating a profound shift in how new commercial lighting is evaluated, specified and approved.
April 26, 2024 The City of Winnipeg’s Planning, Property & Development Department will implement zoning bylaw updates in phases, starting with development permit exemptions. Recent bylaw amendments, approved on March 21, 2024, grant the PP&D Director authority to determine the need for a development permit. These exemptions aim to streamline the permit process for projects…
January 23, 2024 This article is a summary from the Technical Q&A as part of ESA’s Annual General Meeting, held on November 22, 2023. The Technical Q&A is hosted by ESA Technical Advisor Keith Bartlett working with Technical Advisors, Diana Madill, Trevor Tremblay, Robert Mitchell, and Darrin Smith to answer questions pre-submitted by LECs. The…
Contractors dominate the electrical product purchasing market with 48%, over twice the next closest market, Industrial, OEM and Automation which makes up 23% of Full-Line electrical customers.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
February 6, 2023 By: Blake Marchand There are several factors that have led to uncertainty when it comes to material availability and product prices fluctuation in the electrical market. Primarily, those factors stem from global events that influence the broader market – the value and demand of raw materials, the cost of shipping, the cost…
A little over a decade ago, the introduction of LED lighting seemed to transform commercial lighting overnight. Now we’re seeing it happen again. This time, connectivity and big data are driving the change, creating a profound shift in how new commercial lighting is evaluated, specified and approved.
August 14, 2025 In June, the total value of building permits issued in Canada decreased by $1.2 billion (-9.0%) to $12.0 billion. Ontario’s institutional component (-$1.4 billion) led the decline in construction intentions in June, after driving the growth in May. On a constant dollar basis (2023=100), the total value of building permits issued in June decreased 9.5% from the… Read More…
August 6, 2025 The total value of investment in building construction decreased by $491.4 million to $21.8 billion in May. Investment in the residential sector fell 3.0%, while the non-residential sector edged down 0.4%. On a constant dollar basis (2023=100), the total value of investment in building construction in May was down 2.3% from the previous month and was up 3.1%… Read More…
August 28, 2025 This round of the Skills Development Fund (SDF) Training Stream will provide $260 million for innovative projects that support the hiring, training and upskilling of workers in manufacturing, health care, construction, automotive and other skilled trades. Ontario Electrical League will recieve $2,995,000 to help 500 journeypersons, registered apprentices, people residing in remote/rural communities… Read More…
August 28, 2025 By Krystie Johnston ABB recently announced their plan to build a new R&D and manufacturing facility in Canada. It will combine their existing facilities in Iberville and Saint-Jean-sur-Richelieu to increase production capacity and support future growth in key sectors across Canada like utilities, energy, and infrastructure. Michael Shenouda, Canada Region Leader –… Read More…
August 20, 2025 EB Horsman & Son is pleased to announce the promotion of Sean O’Brien to Branch Manager of their Burnaby location, effective August 6, 2025. Sean brings over 15 years of experience in the electrical and lighting industry, with a strong background in sales, technical leadership, project management, and clean energy initiatives. He… Read More…
August 25, 2025 Houle are proud to announce they been selected as the electrical and technology contractor for the new BC Cancer centre at the Royal Inland Hospital campus in Kamloops. Located adjacent to Royal Inland Hospital, this five-storey cancer centre will provide people in BC’s Interior with expanded access to cancer care closer to… Read More…
August 28, 2025 The Ontario government is investing over $23 million through the Skills Development Fund (SDF) Training Stream to help more than 4,200 people across Mississauga and surrounding areas access better training for in-demand sectors such as construction, health care, transportation, manufacturing, aerospace and the skilled trades. Electrical industry recipients: National Electrical Trade Council (NETCO) Ontario Electrical Industry… Read More…
August 25, 2025 Contact Delage are excited to announce the addition of a new trusted partner to their lineup: Solvic, an innovative manufacturer specializing in solar lighting. This new partnership reflects Contact Delage’s ongoing commitment to offering sustainable, high-performance solutions tailored to real-world applications. With Solvic, they’re expanding their range of autonomous solar products—perfect for lighting… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.