Tips on Ball Park Pricing and Charging for Estimates

 

May 31, 2016

Shawn McCadden

Any contractor who has been in business for any length of time has probably had to deal with ball park pricing and charging for estimates. Homeowners always seem to want one but not the other. Rather than risk letting a ball park price make them look bad, savvy contractors can use the request for one to help cause the other to happen. If interested in how to do this, read on.

Let’s start with ball park pricing.

How many times in your career have homeowners asked you for a “ball park” price for their project. And how many times did your ball park price end up being nowhere close to the actual price of the project?

I find the whole idea of ball park pricing comical. I’m not saying it doesn’t have value in some selling scenarios. I am saying, however, that when contractors offer a ball park price more times than not they strike out rather than hit a home run.

So, when a prospect asked me for a ball park number, I would respond by asking them which ball park they preferred; Fenway Park or Yankee Stadium. That usually stopped them right there in their tracks and helped them think about what they just asked for. And, by asking that question, I was able to get them into a much more meaningful conversation about their project. Let’s face it, a “ball park number” really doesn’t have much value unless there are some specifications to help give it any relevance.

Try asking them about which ball park they are looking for. Feel free to substitute the parks you use. I think you will find doing so to be a great conversation starter.

Then there’s the whole idea about charging for estimates.

As contractors we know estimates are not free. Somehow the cost of creating an estimate must be recouped by the contractor.

Some contractors may say they don’t charge for estimating. If that’s true, they are working for free and the cost of estimating is not included in the price quoted to the prospect.

I don’t know about you, but in my opinion if you do estimates for free you are undervaluing your worth and might also be putting your professionalism in doubt. If you are not charging for estimates, and you also are not accumulating enough money to someday retire, working for free might be a good part of why. And, contractors who do so are making things challenging for those who do charge by helping consumers think they should get estimates for free.

On the other hand, many contractors who tell their prospects they do not charge for estimates are actually not charging for the estimate in advance. Instead, they recoup the cost of estimating through their mark-up, but only if they sell the job.

It’s okay if prospects don’t want to pay, but why get offended?

So why do they get offended when you tell them you charge for estimates? Did they expect you to work for free? Do they work for free at their jobs? I doubt it.

When homeowners asked if I would do free estimates I would say yes and give them an estimate right then and there. I would say something like, “I estimate the bathroom project will cost somewhere between $15 and $25,000.” Then I would just wait. When they asked why such a big range, it usually led to meaningful conversations about the fact that an estimate is really just a guess and may not have any relevance to the true cost of what they would actually want to buy. And, as a result, having this conversation helped them discover the need for plans and or specifications so I could give them a fixed price in place of the “estimate.”

After all, that’s what most consumers are really looking for: a fixed price for what they actually want.

One option you can try if the homeowner can’t understand why you charge for estimates: suggest bartering? “If I spend the time to collect all the info about your project, seek pricing from my vendors, meet with my subs to get accurate pricing for their work, and then assemble an accurate cost and proposal, how about we do a trade? Maybe while I’m doing that stuff you could either babysit my kids or cut my lawn? Would that be a fair trade?”

A point of clarification that should already be obvious: if you choose to go down the “Which ball park” or “Let’s barter” path make sure you do it in a respectful manner and your purpose for using this analogy is appreciated by your prospect.

How you say it can make the difference between being the contractor of choice and being shown the door.


Read more in EIN from Shawn McCadden:

3 Ways To Get Fewer Leads But Close More Remodeling Sales
Don’t Underestimate Your Estimating System’s Potential
Tips on Ball Park Pricing and Charging for Estimates
Is A Contractor Really a Salesperson If He or She Hits Send?
3 Ways To Get Fewer Leads But Close More Remodeling Sales
3 Simple Steps to Covering an Employee’s Non-Productive Time
Setting the Example: Getting Employees to Think Like Owners
Comparing Contractor Mark-ups Can Be Pointless and Very Risky
Don’t Put Your Business At Risk By Guessing At What Mark-up
Simple Profit Sharing Plan for Contractors

Check out Shawn’s website http://www.shawnmccadden.com/ and blog www.shawnmccadden.com/Subscribe-to-The-Design-Builders-Blog.

* “Understanding what impacts your construction company’s reputation,”

http://www.pn-projectmanagement.com/construction-management-tips/understanding-what-impacts-your-construction-companys-reputation

 

Related Articles


Latest Articles


Changing Scene

  • Cascadia Sales Representing Eaton in BC

    Cascadia Sales Representing Eaton in BC

    May 21, 2026 Cascadia Sales are thrilled to announce that effective May 11, 2026, they will officially be representing an expanded portfolio of Eaton brands across British Columbia. “Adding Crouse-Hinds, B-Line, Bussmann, and Cooper Power series to our lineup allows us to provide even more comprehensive electrical solutions to our BC partners,” the company said Read More…

  • Nedco Opens New Kelowna Branch

    Nedco Opens New Kelowna Branch

    May 21, 2026 In a recent announcement from Nedco, the company celebrated the Grand Opening of the new Kelowna branch on Friday, May 8, 2026. Nedco invited attendees to explore the new 11,000 sq. ft. facility designed to conveniently serve Okanagan customers. The tour of the new facility took place from 11:00 AM to 2:00 Read More…

  • Leviton Canada Partners with NRG INTENSI‑T Inc. to Strengthen the Presence of Lighting Controls in the Quebec Region

    Leviton Canada Partners with NRG INTENSI‑T Inc. to Strengthen the Presence of Lighting Controls in the Quebec Region

    May 21, 2026 Leviton Canada is proud to announce its partnership with NRG INTENSI-T Inc., who will now represent Leviton’s Lighting Controls product line throughout the Quebec region, effective May 1, 2026. This new partnership reflects Leviton’s commitment to strengthening its lighting controls presence in Quebec through experienced, market-focused representation. With deep regional knowledge, an Read More…

  • Mac’s II Agencies Expands ABB Partnership into UPS Solutions

    Mac’s II Agencies Expands ABB Partnership into UPS Solutions

    May 21, 2026 As demand increases for resilient, always-on power for commercial, industrial, and mission-critical environments, Mac’s II Agencies is strengthening its Power Quality portfolio with ABB systems engineered for diverse conditions. With a broad range of sizes and configurations available, engineers, contractors, and end users can specify power backup and protection solutions with continued confidence, backed Read More…