Survey Says: What Sectors Electrical Maintenance People and Mechanics Work In
Related Articles
Study Shows Value of Sensor-controlled, Bi-Level Lighting
Considerable energy savings can be achieved with sensor-controlled, bi-level corridor lighting, according to results of a field demonstration led by the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute.
Electrical Inspections with a Thermal Camera
Infrared thermal cameras are a great additional to a preventive maintenance program. They’re easy to use and can help you find where issues are within your electrical system. Thermal cameras often have a point-and-shoot design with the IR image displayed on a screen on the back of the camera.
Stop Reacting to Arc Flash
The arc flash hazard has overwhelmed employers in all industries across Canada and in the United States. In most cases unfortunately, eEmployers have been purely reactive! I call it “bottom up hierarchy of risk controls.”
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 30](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 30
Section 30, as outlined in rule 30-000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, protection, and control of all lighting equipment.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Study Shows Value of Sensor-controlled, Bi-Level Lighting
Considerable energy savings can be achieved with sensor-controlled, bi-level corridor lighting, according to results of a field demonstration led by the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute.
Electrical Inspections with a Thermal Camera
Infrared thermal cameras are a great additional to a preventive maintenance program. They’re easy to use and can help you find where issues are within your electrical system. Thermal cameras often have a point-and-shoot design with the IR image displayed on a screen on the back of the camera.
Stop Reacting to Arc Flash
The arc flash hazard has overwhelmed employers in all industries across Canada and in the United States. In most cases unfortunately, eEmployers have been purely reactive! I call it “bottom up hierarchy of risk controls.”
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 30
Section 30, as outlined in rule 30-000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, protection, and control of all lighting equipment.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Study Shows Value of Sensor-controlled, Bi-Level Lighting
Considerable energy savings can be achieved with sensor-controlled, bi-level corridor lighting, according to results of a field demonstration led by the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute.
Electrical Inspections with a Thermal Camera
Infrared thermal cameras are a great additional to a preventive maintenance program. They’re easy to use and can help you find where issues are within your electrical system. Thermal cameras often have a point-and-shoot design with the IR image displayed on a screen on the back of the camera.
Stop Reacting to Arc Flash
The arc flash hazard has overwhelmed employers in all industries across Canada and in the United States. In most cases unfortunately, eEmployers have been purely reactive! I call it “bottom up hierarchy of risk controls.”
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 30
Section 30, as outlined in rule 30-000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, protection, and control of all lighting equipment.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Latest Articles
-
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 34](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 34
Rule 34-000 Scope, this is a supplementary or amendatory section of the code and applies to incandescent lamps, fluorescent lamps, high-voltage luminous discharge (cold-cathode or neon) tubes, high-intensity discharge lamps and other light-emitting sources such as LEDs. Read More…
-
Hazardous Environment vs. Intrinsically Safe Sensors: Understanding the Differences
May 5, 2025 Sensors designed for industrial applications often face harsh conditions, including extreme temperatures, high humidity, exposure to chemicals, and the presence of combustible gases or dust. Two common classifications for sensors used in such environments are hazardous environment sensors and intrinsically safe sensors. While they share some overlap, they serve different purposes and… Read More…
-
The Wild and Wonderful of Thermal by FLIR – How Thermal Imaging is Augmenting More Than Just Cameras
May 5, 2025 By Krystie Johnston Teledyne FLIR OEM launched their Thermal by FLIR about six years ago, to expand support for original equipment manufacturers (OEMs) who integrate FLIR thermal camera technology into their products. Since then, these collaborations have taken thermal into completely new spaces. Mike Walters, Vice President of Emerging Product Management at FLIR… Read More…
-
Ontario Leads Residential Sector Increase in February Construction Investment
May 5, 2025 Overall, investment in building construction rose 1.5% (+$331.7 million) to $22.4 billion in February, with gains being recorded across all components. The residential sector increased 1.8% to $15.7 billion, while the non-residential sector was up 0.8% to $6.8 billion. Year over year, investment in building construction grew 8.9% in February. On a constant dollar basis (2017=100), investment in building construction… Read More…
Changing Scene
-
Hammond Power Solutions Appoints Linda Nadeau Sanford as Western Regional Sales Manager
May 12, 2025 Hammond Power Solutions (HPS), a leader in dry-type transformers and power quality solutions, is pleased to announce the appointment of Linda Nadeau Sanford as the new Western Regional Sales Manager. Linda will play a key part in driving sales and revenue across the Western Canada region. She will oversee territory management, advance… Read More…
-
Susanna Zagar, Ontario Energy Board CEO, Named EHRC’s 2025 Agent of Change
May 12, 2025 Electricity Human Resources Canada (EHRC) is proud to announce Susanna Zagar (she/her), Chief Executive Officer of the Ontario Energy Board (OEB), as the recipient of the 2025 Agent of Change Award. This recognition celebrates Ms. Zagar’s remarkable leadership and commitment to diversity, equity and inclusion (DEI) in the electricity sector. Since stepping… Read More…
-
AD Reports Huge Jump in Member Sales Through Three Months of 2025
May 12, 2025 AD reports that member sales in the first three months of 2025 increased 23% to a record $24 billion across the group’s 14 divisions and three countries. AD welcomed over 550 new members in the first quarter through both organic growth and the IMARK Electrical merger. AD members also acquired another 10… Read More…
-
Legrand Introduces Wattstopper i3 Building Management Platform
May 12, 2025 Legrand® has announced the launch of the Wattstopper i3 Platform, a next-generation lighting and building intelligence solution powered by KODE Labs, a global leader of advanced smart building technology. The partnership positions Legrand to lead the lighting controls industry into a new era of unified experiences, seamless integrations, and data-driven control, making it easier… Read More…
