Where Electrical Technologists and Technicians Work

April 4 2016
Among nine categories, manufacturing employs one in 3, twice as much as the next highest category.
Source: Service Canada: www.servicecanada.gc.ca.
April 4 2016
Among nine categories, manufacturing employs one in 3, twice as much as the next highest category.
Source: Service Canada: www.servicecanada.gc.ca.
The war for talent is fierce across all sectors of our economy, and it’s no secret that things are heating up as the next big wave in technology — AI — is displacing jobs and creating new ones.
DX3 is an Alberta-based, Canadian-owned manufacturer of commercial electrical equipment. Specializing in outdoor solar light, DX3 provides “light anywhere, anytime.” All of the firm’s products can be installed without any utility grid connections, and it provides solutions for commercial and municipal users where existing lighting poles and infrastructure are not in place.
Compared to many other industries, the construction industry has traditionally been slow at technological development.* This is changing rapidly, and more than digitization and emerging technologies, sustainability is going to become one of the dominant disruptive forces to transform the construction industry…
November 30, 2022 With businesses around the world facing unprecedented pressure from the cost of energy and the urgency of climate change, a new report from the Energy Efficiency Movement shows that improving industrial energy efficiency is the fastest and most effective way for a business to cut energy costs and greenhouse gas emissions. The…
February 23, 2024 LIGHTPOINT Studio & Showroom, the brand-new corporate classroom training facility, located at their national customer service and sales center (NCSSC) in Westfield, IN. Go HERE for more information
EHRC is looking for success stories from electricity sector organizations that have provided meaningful and equitable employment for persons with (both visible and invisible) disabilities.
The war for talent is fierce across all sectors of our economy, and it’s no secret that things are heating up as the next big wave in technology — AI — is displacing jobs and creating new ones.
DX3 is an Alberta-based, Canadian-owned manufacturer of commercial electrical equipment. Specializing in outdoor solar light, DX3 provides “light anywhere, anytime.” All of the firm’s products can be installed without any utility grid connections, and it provides solutions for commercial and municipal users where existing lighting poles and infrastructure are not in place.
Compared to many other industries, the construction industry has traditionally been slow at technological development.* This is changing rapidly, and more than digitization and emerging technologies, sustainability is going to become one of the dominant disruptive forces to transform the construction industry…
November 30, 2022 With businesses around the world facing unprecedented pressure from the cost of energy and the urgency of climate change, a new report from the Energy Efficiency Movement shows that improving industrial energy efficiency is the fastest and most effective way for a business to cut energy costs and greenhouse gas emissions. The…
February 23, 2024 LIGHTPOINT Studio & Showroom, the brand-new corporate classroom training facility, located at their national customer service and sales center (NCSSC) in Westfield, IN. Go HERE for more information
EHRC is looking for success stories from electricity sector organizations that have provided meaningful and equitable employment for persons with (both visible and invisible) disabilities.
The war for talent is fierce across all sectors of our economy, and it’s no secret that things are heating up as the next big wave in technology — AI — is displacing jobs and creating new ones.
DX3 is an Alberta-based, Canadian-owned manufacturer of commercial electrical equipment. Specializing in outdoor solar light, DX3 provides “light anywhere, anytime.” All of the firm’s products can be installed without any utility grid connections, and it provides solutions for commercial and municipal users where existing lighting poles and infrastructure are not in place.
Compared to many other industries, the construction industry has traditionally been slow at technological development.* This is changing rapidly, and more than digitization and emerging technologies, sustainability is going to become one of the dominant disruptive forces to transform the construction industry…
November 30, 2022 With businesses around the world facing unprecedented pressure from the cost of energy and the urgency of climate change, a new report from the Energy Efficiency Movement shows that improving industrial energy efficiency is the fastest and most effective way for a business to cut energy costs and greenhouse gas emissions. The…
February 23, 2024 LIGHTPOINT Studio & Showroom, the brand-new corporate classroom training facility, located at their national customer service and sales center (NCSSC) in Westfield, IN. Go HERE for more information
EHRC is looking for success stories from electricity sector organizations that have provided meaningful and equitable employment for persons with (both visible and invisible) disabilities.
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
by William (Bill) Burr Question: Adam is working in his garage cutting wood on his table saw. Suddenly the lights go out and the sump pump and the table saw stop running. There is obviously a power outage. After a short time, the lights and the sump pump come back on, but thetable saw stays off. Adam needs to restart it. Can you explain why the lights and sump pump come back on… Read More…
June 9, 2025 MERSEN CANADA TORONTO INC. is pleased to announce effective June 2nd, 2025, Andrey Goreev has joined Mersen Electrical Power as Regional Sales Manager for the Western Canada Region. He will report to Tom Arbanas, Vice President of Distribution Sales and Customer Care, Canada. Andrey has over 18 years of experience in industrial… Read More…
June 9, 2025 In an industry dominated by global giants, a startup from Canada’s East Coast is quickly becoming one of the most compelling cleantech success stories in the country. Electric Avenue, a Nova Scotia–based EV charging manufacturer, is making waves in the North American market with the official launch of its Watti Pro Echo… Read More…
June 9, 2025 The Manitoba government will sign a new memorandum of understanding with British Columbia to advance free trade between the two provinces and cabinet will pass regulations by July 1 to ensure mutual recognition of other provinces by Canada Day, Premier Wab Kinew announced today at the MBiz Breakfast Series hosted by the… Read More…
June 9, 2025 Trade barriers between Nova Scotia, several provinces and the federal government will soon be removed. Nova Scotia, along with Alberta, British Columbia, Manitoba, Ontario and Prince Edward Island have taken action to remove barriers and red tape that will open up new trade and investment opportunities. It is also anticipated that the… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.