14 Best Practices for Lineman Safety, Part 1

July 14, 2016

Wilson M. Yancey, Jr.

Appearing below is an excerpt of a paper presented by Wilson Yancey Jr. at the 2016 Academy of Electrical Contracting’s annual meeting in June: Cultivating Safety through Community: Training and Best Practices of the Electrical Transmission and Distribution Partnership. The academy was established by the National Electrical Contractors Association (NECA) in 1968 to recognize exceptional and outstanding service to the electrical contracting industry.

It was not so long ago that on-job injury and fatality information was held close to the vest by those of us in the electrical transmission and distribution industry. It was considered proprietary information, the kind of thing you didn’t want your competitors to know about your company.

In 2003, executive leadership from our industry decided it was time to take the unprecedented step of joining together to move aggressively toward reducing or eliminating injuries and fatalities.

The best practices that follow were developed by members of a U.S. industry group, the Electrical Transmission and Distribution (ET&D) Partnership. Over time they have become the standard in the industry. The complete best practices, including helpful FAQs, appear online at http://www.neca-neis.org/docs/default-source/powerline/best_practices_with_faq.pdf?sfvrsn=2.

1. Administrative controls

In order to address injuries due to improper job planning and risk assessment, this best practice requires pre-planning to begin at the pre-bid meeting and preliminary job site analysis to include the gathering of all relevant information needed to make a full risk assessment. This also suggests working on de-energized conductors and equipment whenever possible.

2. Pre-use inspection of rubber protective equipment


To avoid injuries due to worn, damaged or contaminated insulating equipment, all uniform components are to be inspected prior to use and removed from service if any defect is found.

3. Job briefings

Held at the project location at the beginning of each work shift, as work tasks or conditions change, and as additional personnel arrive on the job site, this best practice provides a standard methodology for sharing key information including hazards, protective equipment to be used, emergency response information and more.

4. Qualified observer

Injuries caused by unrecognized hazards and changes in work conditions can be offset or eliminated by the use of a qualified observer. These well-informed crew members ensure clearances are maintained, proper equipment is used, and effective cover-up is installed. This best practice also outlines the criteria of a qualified observer.

5. Insulate and isolate safety performance check

To ensure compliance with Isolate and Insulate procedures, this best practice requires a safety review process that includes assurances that company safety rules and proper cover-up procedures are being followed.

6. Cradle-to-cradle use of insulating rubber gloves and sleeves

Insulated gloves and sleeves are proven methods for reducing electrical contact injuries and fatalities. This best practice details the use of such PPE including when it is to be used and the requirements for the gloves and sleeves utilized while working from an aerial platform.

7. Lock-to-lock use of insulating rubber gloves and sleeves

As with the cradle-to-cradle use of insulated gloves and sleeves, the same equipment used while working on pad mounted equipment from prior to unlocking until relocking has been proven to reduce electrical contact injuries and fatalities. 

*****
By communicating these best practices proactively and consistently, our industry will continue to see a trend of decreasing injuries as safety efforts that once were novel become the norm. Effective, trained, empowered leadership will deepen those efforts, which bringing us to our training programs.

Part 2, featuring the remaining 7 best practices, will appear in the August 16 issue of Electrical Industry News Week.


Wilson Yancey is the Vice President of Safety, Health and Environment for Quanta Services, Inc., and was made a fellow of the Academy of Electrical Contracting in 2015. Read the entire paper here: www.necanet.org/docs/default-source/academy-papers-(by-decade)/yancey—june-2016.pdf.

 

 

Related Articles


Latest Articles


Changing Scene

  • Munden Enterprises Earns Arlington’s Canadian Sales Achievement Award

    Munden Enterprises Earns Arlington’s Canadian Sales Achievement Award

    February 18, 2025 Arlington Industries Inc. is pleased to announce the recipients of its annual representative sales awards – for 2024 sales of Arlington’s MADE IN USA and many patented, innovative and labor-saving products. Presented to firms representing Arlington at the recent 2025 National Electrical Manufacturers Representatives Association (NEMRA) meeting in Orlando, Florida, these awards… Read More…

  • Have your Say on the Proposed Regulations for the NWT Builders’ Lien Act

    Have your Say on the Proposed Regulations for the NWT Builders’ Lien Act

    February 14, 2025 The GNWT is modernizing the legal framework for construction liens. In 2023, the Builders’ Lien Act was enacted to replace the Mechanics Lien Act. The new legislation was put in place to address modern construction practices. It sets out the legal processes, systems, rights, and remedies for parties involved in construction disputes.  The GNWT… Read More…

  • Federal Government Investing in Skilled Trades Training for Atlantic Canada

    Federal Government Investing in Skilled Trades Training for Atlantic Canada

    February 14, 2025 Canada is building more homes, bridges and key infrastructure than at any point in recent history. That requires skilled workers in communities across the country, including in the Atlantic provinces. To encourage more people to join the skilled trades, to build the homes Canadians expect and the resilient economy this moment demands,… Read More…

  • Nova Scotia Power Holding Open Houses to Discuss Modernizing the Electrical Inspections Process

    Nova Scotia Power Holding Open Houses to Discuss Modernizing the Electrical Inspections Process

    February 14, 2025 As Nova Scotia continues to experience unprecedented building growth, it’s the perfect time to review and improve the electrical inspection process—with safety as the top priority. Nova Scotia Power and the Department of Labour, Skills, and Immigration are coming together to explore new opportunities—including risk-based electrical inspections—to ensure the process remains safe,… Read More…