Median Salaries By Province
Related Articles
Building a New Power Line Gave BC crews a Chance to Shine
Foreman Bill Dalling can’t imagine doing anything else but working in the line trade. His crews worked on slopes of up to 30% grade capable of snapping chains or towing straps securing heavy loads. And then there was the spring thaw, where snow turned to mud “thick like gumbo.”But to hear Dalling describe it, building a new transmission line is about as good as it gets, at least for someone who’s made a career out of building power lines.
Remote Work: To Monitor or Not to Monitor, That is the Question.
By Michelle Branigan, CEO Electricity Human Resources Canada As more and more workers utilize remote work, some employers are looking to track how they spend their time when they’re out of sight. Concerns about productivity has resulted in HR managers researching employee monitoring software (also referred to as proof of work software). Employee monitoring software…
Maximizing Excel: Practical Use Cases for Preconstruction
November 8, 2024 By Melvin Newman Excel is a powerful and flexible tool that can enhance efficiency in electrical construction estimating. Spreadsheets, like those in Excel, consist of a grid of “cells” where each cell can hold various types of data. Originating from mainframe computers in the 1960s and later developed for Apple computers in…
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 24 — Health Care Areas](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 24 — Health Care Areas
December 6, 2024 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B, or…
To Label or Not to Label: Circuit Labeling of Modular, Manufactured Wiring Systems
From time to time a request is made, typically by an installing electrical contractor, to label some or all the components of a modular wiring system with the circuit ID before shipping to the job site.
Guide to the Canadian Electrical Code, Part 1 – A Road Map: Section 40
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document.
Building a New Power Line Gave BC crews a Chance to Shine
Foreman Bill Dalling can’t imagine doing anything else but working in the line trade. His crews worked on slopes of up to 30% grade capable of snapping chains or towing straps securing heavy loads. And then there was the spring thaw, where snow turned to mud “thick like gumbo.”But to hear Dalling describe it, building a new transmission line is about as good as it gets, at least for someone who’s made a career out of building power lines.
Remote Work: To Monitor or Not to Monitor, That is the Question.
By Michelle Branigan, CEO Electricity Human Resources Canada As more and more workers utilize remote work, some employers are looking to track how they spend their time when they’re out of sight. Concerns about productivity has resulted in HR managers researching employee monitoring software (also referred to as proof of work software). Employee monitoring software…
Maximizing Excel: Practical Use Cases for Preconstruction
November 8, 2024 By Melvin Newman Excel is a powerful and flexible tool that can enhance efficiency in electrical construction estimating. Spreadsheets, like those in Excel, consist of a grid of “cells” where each cell can hold various types of data. Originating from mainframe computers in the 1960s and later developed for Apple computers in…
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 24 — Health Care Areas
December 6, 2024 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B, or…
To Label or Not to Label: Circuit Labeling of Modular, Manufactured Wiring Systems
From time to time a request is made, typically by an installing electrical contractor, to label some or all the components of a modular wiring system with the circuit ID before shipping to the job site.
Guide to the Canadian Electrical Code, Part 1 – A Road Map: Section 40
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document.
Building a New Power Line Gave BC crews a Chance to Shine
Foreman Bill Dalling can’t imagine doing anything else but working in the line trade. His crews worked on slopes of up to 30% grade capable of snapping chains or towing straps securing heavy loads. And then there was the spring thaw, where snow turned to mud “thick like gumbo.”But to hear Dalling describe it, building a new transmission line is about as good as it gets, at least for someone who’s made a career out of building power lines.
Remote Work: To Monitor or Not to Monitor, That is the Question.
By Michelle Branigan, CEO Electricity Human Resources Canada As more and more workers utilize remote work, some employers are looking to track how they spend their time when they’re out of sight. Concerns about productivity has resulted in HR managers researching employee monitoring software (also referred to as proof of work software). Employee monitoring software…
Maximizing Excel: Practical Use Cases for Preconstruction
November 8, 2024 By Melvin Newman Excel is a powerful and flexible tool that can enhance efficiency in electrical construction estimating. Spreadsheets, like those in Excel, consist of a grid of “cells” where each cell can hold various types of data. Originating from mainframe computers in the 1960s and later developed for Apple computers in…
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 24 — Health Care Areas
December 6, 2024 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B, or…
To Label or Not to Label: Circuit Labeling of Modular, Manufactured Wiring Systems
From time to time a request is made, typically by an installing electrical contractor, to label some or all the components of a modular wiring system with the circuit ID before shipping to the job site.
Guide to the Canadian Electrical Code, Part 1 – A Road Map: Section 40
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document.
Latest Articles
-
Code Quiz: Canadian Electrical Code, Part 1, 26th Edition Section 28 – Motors and Generators
by William (Bill) Burr Question: Adam is working in his garage cutting wood on his table saw. Suddenly the lights go out and the sump pump and the table saw stop running. There is obviously a power outage. After a short time, the lights and the sump pump come back on, but thetable saw stays off. Adam needs to restart it. Can you explain why the lights and sump pump come back on… Read More…
-
![Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: 26 the Edition, Section 36 – High Voltage Installations](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: 26 the Edition, Section 36 – High Voltage Installations
Although Rule 36-000 has not yet been amended, note that the definition of voltage in Section 0 – Definitions has been revised in the 26th edition… Read More…
-
Ontario Home Renovation Incentives for Solar
June 2, 2025 Adding rooftop solar panels and a battery energy storage system to a home can help generate clean, renewable energy year round.* A home energy assessment is not required. Solar panels Battery energy storage Solar photovoltaic (PV) technology uses solar cells to convert sunlight directly into electricity. This can help you manage energy costs,… Read More…
-
Quebec’s Chauffez Vert Financial Assistance Program for Electric Heating
June 2, 2025 The government’s Chauffez vert program offers financial assistance to homeowners who wish to replace their oil or propane central heating system with a system that runs on renewable energy (electricity, etc.). Water heater conversion work is also eligible under certain conditions. Summary of eligible work To be eligible for financial assistance, the fuel heating… Read More…
Changing Scene
-
ABB Acquires Bel Products Inc. to Expand Enclosures Portfolio in North America
June 3, 2025 ABB Electrification Canada Inc. announced it has completed its acquisition of Bel Products Inc., a Canadian manufacturer of commercial, industrial and custom-made enclosures. This acquisition enhances ABB’s market presence in Canada and the U.S., expanding its product portfolio and enabling the company to leverage its manufacturing, warehousing and supply chain capabilities to better meet growing customer demand. The financial terms of the transaction are undisclosed. The enclosures market is experiencing strong growth, fueled… Read More…
-
WAGO Now Available at Vanco Electrical Solutions
June 2 2025 Vanco Electrical Solutions are excited to announce that Vanco Electrical Solutions has partnered with WAGO, making their full line of innovative spring‑pressure connection and automation products available online at vancoelectrical.com. From their groundbreaking Push‑in CAGE CLAMP® technology to flexible I/O systems, WAGO has built a reputation for reliability and ease of use across… Read More…
-
Sonepar Announces the Appointment of Rob Thibeault to President of Robertson Electric
June 2, 2025 Sonepar is pleased to announce the promotion of Rob Thibeault to President Robertson Electric effective June 2, 2025. Rob joined Robertson in 2017, bringing with him extensive experience in retail and marketing. Rob’s skill and dedication quickly saw him taking on additional responsibilities in operations, pricing, and analytics. Demonstrating a keen understanding… Read More…
-
Hammond Power Solutions Appoints Phill Picassinos as New Regional Sales Manager for Eastern GTA
June 2, 2025 Hammond Power Solutions is pleased to announce the appointment of Phill Picassinos as the Regional Sales Manager for Eastern GTA, Ontario. Phill will lead HPS’ sales efforts in the Eastern GTA, focusing on strengthening customer relationships and implementing regional strategies that align with national sales objectives. “Phill brings a wealth of experience… Read More…
