Where Electrical Technologists and Technicians Work
April 4 2016
Among nine categories, manufacturing employs one in 3, twice as much as the next highest category.
Source: Service Canada: www.servicecanada.gc.ca.
Related Articles
Unlicensed Electrician Causes Fire in Hamilton Home, Fined $7,500 for Unsafe Work
August 2, 2023 On June 15, 2023, Jason Tabunot pleaded guilty and was convicted in Hamilton for operating an electrical contracting business without an electrical contractor’s licence. Tabunot was ordered to pay a $7,500 fine, plus a victim surcharge of $1,875, for work he conducted at a Hamilton residential property. The defendant was hired by the homeowner…
A Short History of Safety Norms For LEDs
What came first: the chicken or the egg? In technical files the answer is simple: first comes the product, then the standard. In 1993, when Nichia introduced the blue LED (based on GaN), the issue of photo biological safety was taken into consideration. The International Electrotechnical Commission (IEC) decided to include LEDs in the laser product category and related norms (IEC 60825). This decision was based on the use of infrared LED in the fibre communication system due to its very narrow band.
Wire to Wire: Tom Kennedy | Teacher Turned Champion
July 18, 2023 What if your electrical teacher was the nation’s top electrician? You saw him take home the trophy at the 2022 IDEAL National Championship, now hear his story. Tom Kennedy has been an electrician for 31 years, and he’s been teaching apprentices since 1997. Watch this episode of Wire-to-Wire to get to know this…
Guide to the Canadian Electrical Code, Part I — Instalment 50
Annex J18 is optionally permitted for use in additions, modifications, renovations or operation and maintenance of existing facilities employing the Division system of classification. The rules of Annex J18 are normative (mandatory) where used and amend or supplement other requirements of the Code.
Unlicensed Electrician Causes Fire in Hamilton Home, Fined $7,500 for Unsafe Work
August 2, 2023 On June 15, 2023, Jason Tabunot pleaded guilty and was convicted in Hamilton for operating an electrical contracting business without an electrical contractor’s licence. Tabunot was ordered to pay a $7,500 fine, plus a victim surcharge of $1,875, for work he conducted at a Hamilton residential property. The defendant was hired by the homeowner…
A Short History of Safety Norms For LEDs
What came first: the chicken or the egg? In technical files the answer is simple: first comes the product, then the standard. In 1993, when Nichia introduced the blue LED (based on GaN), the issue of photo biological safety was taken into consideration. The International Electrotechnical Commission (IEC) decided to include LEDs in the laser product category and related norms (IEC 60825). This decision was based on the use of infrared LED in the fibre communication system due to its very narrow band.
Wire to Wire: Tom Kennedy | Teacher Turned Champion
July 18, 2023 What if your electrical teacher was the nation’s top electrician? You saw him take home the trophy at the 2022 IDEAL National Championship, now hear his story. Tom Kennedy has been an electrician for 31 years, and he’s been teaching apprentices since 1997. Watch this episode of Wire-to-Wire to get to know this…
Guide to the Canadian Electrical Code, Part I — Instalment 50
Annex J18 is optionally permitted for use in additions, modifications, renovations or operation and maintenance of existing facilities employing the Division system of classification. The rules of Annex J18 are normative (mandatory) where used and amend or supplement other requirements of the Code.
Unlicensed Electrician Causes Fire in Hamilton Home, Fined $7,500 for Unsafe Work
August 2, 2023 On June 15, 2023, Jason Tabunot pleaded guilty and was convicted in Hamilton for operating an electrical contracting business without an electrical contractor’s licence. Tabunot was ordered to pay a $7,500 fine, plus a victim surcharge of $1,875, for work he conducted at a Hamilton residential property. The defendant was hired by the homeowner…
A Short History of Safety Norms For LEDs
What came first: the chicken or the egg? In technical files the answer is simple: first comes the product, then the standard. In 1993, when Nichia introduced the blue LED (based on GaN), the issue of photo biological safety was taken into consideration. The International Electrotechnical Commission (IEC) decided to include LEDs in the laser product category and related norms (IEC 60825). This decision was based on the use of infrared LED in the fibre communication system due to its very narrow band.
Wire to Wire: Tom Kennedy | Teacher Turned Champion
July 18, 2023 What if your electrical teacher was the nation’s top electrician? You saw him take home the trophy at the 2022 IDEAL National Championship, now hear his story. Tom Kennedy has been an electrician for 31 years, and he’s been teaching apprentices since 1997. Watch this episode of Wire-to-Wire to get to know this…
Guide to the Canadian Electrical Code, Part I — Instalment 50
Annex J18 is optionally permitted for use in additions, modifications, renovations or operation and maintenance of existing facilities employing the Division system of classification. The rules of Annex J18 are normative (mandatory) where used and amend or supplement other requirements of the Code.
Latest Articles
-
Driivz: 2025 State of EV Charging Network Operators Report
May 19, 2025 As the EV charging industry is poised for profitability, network operators still face many challenges. But what are their biggest challenges, are they ready to scale up to support their business growth, and how will they provide drivers with a better charging experience in 2025. This report answers these questions and more,… Read More…
-
Electri International: Understanding, Identifying, and Measuring Rework
May 19, 2025 ELECTRI has sponsored a research project to create a playbook for electrical contractors that will help you: Unpaid rework refers to activities in the field (including prefabrication) that have to be done more than once, or activities that remove work previously installed as part of the project, where no change order has… Read More…
-
Intermatic Acquired by MPE Partners
May 19, 2025 By David Gordon, Channel Marketing Group, President The Intermatic deal is done. It has been rumored for months that Intermatic was being sold. Strategic buyers and private equity firms were mentioned as expressing interest and reviewing “the book” throughout the fall (and some mentioned even last summer.) According to sources, it was a “challenge” for… Read More…
-
6 Things Contractors Need To Know About the Security Kit for Wire Mesh Tray
May 19, 2025 The rapid expansion of data centers has brought about significant challenges in maintaining data security standards. According to Statistics Canada, recovery costs from cyber security incidents in 2023 were $2.1 billion, up from $600 million in 2021. This critical situation requires a more robust cable management design to protect data from being… Read More…
Changing Scene
-
Schneider Electric Canada Named One of Canada’s Greenest Employers for 2025
May 19, 2025 Schneider Electric Canada has been recognized as one of Canada’s Greenest Employers for 2025 by Mediacorp Canada Inc. as part of the Canada’s Top 100 Employers project, a prestigious honour celebrating organizations that lead the country in creating a culture of environmental sustainability. This recognition highlights Schneider Electric’s long-standing commitment to advancing climate action, driving… Read More…
-
NEW ECAO Website is LIVE
May 19, 2025 ECAO are excited to officially launch the new and improved ECAO website, redesigned with you in mind. Whether you are registering for training, accessing member resources, or staying up to date on key industry developments, ECAO’s new platform makes it faster, easier, and smarter. ECAO have rebuilt the site to deliver the ultimate… Read More…
-
Catalyst Sales and Marketing Announces New Partnership with MGM Transformers
May 19, 2025 Catalyst Sales and Marketing is proud to announce a new line partnership with MGM Transformer Company, a recognized provider of dry-type and liquid-filled transformers for commercial, industrial, and infrastructure applications. With over 50 years of expertise, MGM delivers custom-engineered, reliable, and energy-efficient solutions designed to meet the demands of data centers, renewable… Read More…
-
Intermatic Acquired by MPE Partners
May 19, 2025 By David Gordon, Channel Marketing Group, President The Intermatic deal is done. It has been rumored for months that Intermatic was being sold. Strategic buyers and private equity firms were mentioned as expressing interest and reviewing “the book” throughout the fall (and some mentioned even last summer.) According to sources, it was a “challenge” for… Read More…
