Survey Says: Where Electrical Contractors Work
Related Articles
New Littelfuse Knowledge Center Helps Customers Prevent Ground-Fault Hazards
December 2, 2022 Littelfuse, Inc. introduces a new ground-fault knowledge center (Littelfuse.com/What-is-a-Ground-Fault) for engineers, electricians, maintenance workers, and others to create a safer electrical environment. The resource portal provides educational material including defining ground faults, explaining misconceptions, and offering solutions on how to prevent ground-faults. This information ultimately helps workers minimize the damage to electrical…
Whitepaper: Data Analytics Start with Smart Instruments
Smart instruments are a vital component for process owners to implement IIoT strategies.
A Closer Look at Innovative CleanGen and CleanGrid Solutions from RIC Electronics
Based in Burnaby, B.C., RIC Electronics is a company founded in 1981 around power and backup systems. Since then, the company has expanded from three employees to over 50 and has grown into a 30,000 sq. ft. facility.
What Employers and Employees Need to Know About the Canada Training Benefit
While the time is always right to think about professional development and skills training, the new year marks a symbolic opportunity to make some career resolutions.
Guide to the Canadian Electrical Code, Part 1 , 25th Edition– A Road Map: Section 64
Rule 64-000 notes that this is a supplementary or amendatory section of the Code and applies to the installation of renewable energy systems, energy production systems, and energy storage systems except where the voltage and current are limited to Class 2 circuits as per Rule 16-200 1) a) and b).
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 18 Hazardous Locations](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 18 Hazardous Locations
September 9, 2024 By William (Bill) Burr[ii] The CE Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B,…
New Littelfuse Knowledge Center Helps Customers Prevent Ground-Fault Hazards
December 2, 2022 Littelfuse, Inc. introduces a new ground-fault knowledge center (Littelfuse.com/What-is-a-Ground-Fault) for engineers, electricians, maintenance workers, and others to create a safer electrical environment. The resource portal provides educational material including defining ground faults, explaining misconceptions, and offering solutions on how to prevent ground-faults. This information ultimately helps workers minimize the damage to electrical…
Whitepaper: Data Analytics Start with Smart Instruments
Smart instruments are a vital component for process owners to implement IIoT strategies.
A Closer Look at Innovative CleanGen and CleanGrid Solutions from RIC Electronics
Based in Burnaby, B.C., RIC Electronics is a company founded in 1981 around power and backup systems. Since then, the company has expanded from three employees to over 50 and has grown into a 30,000 sq. ft. facility.
What Employers and Employees Need to Know About the Canada Training Benefit
While the time is always right to think about professional development and skills training, the new year marks a symbolic opportunity to make some career resolutions.
Guide to the Canadian Electrical Code, Part 1 , 25th Edition– A Road Map: Section 64
Rule 64-000 notes that this is a supplementary or amendatory section of the Code and applies to the installation of renewable energy systems, energy production systems, and energy storage systems except where the voltage and current are limited to Class 2 circuits as per Rule 16-200 1) a) and b).
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 18 Hazardous Locations
September 9, 2024 By William (Bill) Burr[ii] The CE Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B,…
New Littelfuse Knowledge Center Helps Customers Prevent Ground-Fault Hazards
December 2, 2022 Littelfuse, Inc. introduces a new ground-fault knowledge center (Littelfuse.com/What-is-a-Ground-Fault) for engineers, electricians, maintenance workers, and others to create a safer electrical environment. The resource portal provides educational material including defining ground faults, explaining misconceptions, and offering solutions on how to prevent ground-faults. This information ultimately helps workers minimize the damage to electrical…
Whitepaper: Data Analytics Start with Smart Instruments
Smart instruments are a vital component for process owners to implement IIoT strategies.
A Closer Look at Innovative CleanGen and CleanGrid Solutions from RIC Electronics
Based in Burnaby, B.C., RIC Electronics is a company founded in 1981 around power and backup systems. Since then, the company has expanded from three employees to over 50 and has grown into a 30,000 sq. ft. facility.
What Employers and Employees Need to Know About the Canada Training Benefit
While the time is always right to think about professional development and skills training, the new year marks a symbolic opportunity to make some career resolutions.
Guide to the Canadian Electrical Code, Part 1 , 25th Edition– A Road Map: Section 64
Rule 64-000 notes that this is a supplementary or amendatory section of the Code and applies to the installation of renewable energy systems, energy production systems, and energy storage systems except where the voltage and current are limited to Class 2 circuits as per Rule 16-200 1) a) and b).
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 18 Hazardous Locations
September 9, 2024 By William (Bill) Burr[ii] The CE Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B,…
Latest Articles
-
Driivz: 2025 State of EV Charging Network Operators Report
May 19, 2025 As the EV charging industry is poised for profitability, network operators still face many challenges. But what are their biggest challenges, are they ready to scale up to support their business growth, and how will they provide drivers with a better charging experience in 2025. This report answers these questions and more,… Read More…
-
Electri International: Understanding, Identifying, and Measuring Rework
May 19, 2025 ELECTRI has sponsored a research project to create a playbook for electrical contractors that will help you: Unpaid rework refers to activities in the field (including prefabrication) that have to be done more than once, or activities that remove work previously installed as part of the project, where no change order has… Read More…
-
Intermatic Acquired by MPE Partners
May 19, 2025 By David Gordon, Channel Marketing Group, President The Intermatic deal is done. It has been rumored for months that Intermatic was being sold. Strategic buyers and private equity firms were mentioned as expressing interest and reviewing “the book” throughout the fall (and some mentioned even last summer.) According to sources, it was a “challenge” for… Read More…
-
6 Things Contractors Need To Know About the Security Kit for Wire Mesh Tray
May 19, 2025 The rapid expansion of data centers has brought about significant challenges in maintaining data security standards. According to Statistics Canada, recovery costs from cyber security incidents in 2023 were $2.1 billion, up from $600 million in 2021. This critical situation requires a more robust cable management design to protect data from being… Read More…
Changing Scene
-
Schneider Electric Canada Named One of Canada’s Greenest Employers for 2025
May 19, 2025 Schneider Electric Canada has been recognized as one of Canada’s Greenest Employers for 2025 by Mediacorp Canada Inc. as part of the Canada’s Top 100 Employers project, a prestigious honour celebrating organizations that lead the country in creating a culture of environmental sustainability. This recognition highlights Schneider Electric’s long-standing commitment to advancing climate action, driving… Read More…
-
NEW ECAO Website is LIVE
May 19, 2025 ECAO are excited to officially launch the new and improved ECAO website, redesigned with you in mind. Whether you are registering for training, accessing member resources, or staying up to date on key industry developments, ECAO’s new platform makes it faster, easier, and smarter. ECAO have rebuilt the site to deliver the ultimate… Read More…
-
Catalyst Sales and Marketing Announces New Partnership with MGM Transformers
May 19, 2025 Catalyst Sales and Marketing is proud to announce a new line partnership with MGM Transformer Company, a recognized provider of dry-type and liquid-filled transformers for commercial, industrial, and infrastructure applications. With over 50 years of expertise, MGM delivers custom-engineered, reliable, and energy-efficient solutions designed to meet the demands of data centers, renewable… Read More…
-
Intermatic Acquired by MPE Partners
May 19, 2025 By David Gordon, Channel Marketing Group, President The Intermatic deal is done. It has been rumored for months that Intermatic was being sold. Strategic buyers and private equity firms were mentioned as expressing interest and reviewing “the book” throughout the fall (and some mentioned even last summer.) According to sources, it was a “challenge” for… Read More…
