Where Electrical Technologists and Technicians Work
April 4 2016
Among nine categories, manufacturing employs one in 3, twice as much as the next highest category.
Source: Service Canada: www.servicecanada.gc.ca.
Related Articles
What is the Right Temperature Set Point for My Electrical Enclosure?
Electrical enclosures serve to protect electrical devices from adverse environmental influences, such as dirt, other particulates, moisture, or chemicals that could damage components.
Common Health Benefits for Electricians
67% of electricans have medical benefits; 30% of electricians have no health benefits at all.
Part One: Re-engineering the Grid
Electricity has been a viable and fundamental power source since Michael Faraday invented the dynamo in 1831.
Solutions to Four Real-World Problems that Installers Face Every Day
From jobsite surprises to installation mistakes, low-voltage installers have their hands full on a daily basis. Anything they can do to reduce costs or save time leads to increased productivity and more revenue.
Why Measure Temperature?
Finding a problem with an infrared camera is sometimes not enough. In fact, an infrared camera image alone without accurate temperature measurements says very little about the condition of an electrical connection or worn mechanical part.
What is the Right Temperature Set Point for My Electrical Enclosure?
Electrical enclosures serve to protect electrical devices from adverse environmental influences, such as dirt, other particulates, moisture, or chemicals that could damage components.
Common Health Benefits for Electricians
67% of electricans have medical benefits; 30% of electricians have no health benefits at all.
Part One: Re-engineering the Grid
Electricity has been a viable and fundamental power source since Michael Faraday invented the dynamo in 1831.
Solutions to Four Real-World Problems that Installers Face Every Day
From jobsite surprises to installation mistakes, low-voltage installers have their hands full on a daily basis. Anything they can do to reduce costs or save time leads to increased productivity and more revenue.
Why Measure Temperature?
Finding a problem with an infrared camera is sometimes not enough. In fact, an infrared camera image alone without accurate temperature measurements says very little about the condition of an electrical connection or worn mechanical part.
What is the Right Temperature Set Point for My Electrical Enclosure?
Electrical enclosures serve to protect electrical devices from adverse environmental influences, such as dirt, other particulates, moisture, or chemicals that could damage components.
Common Health Benefits for Electricians
67% of electricans have medical benefits; 30% of electricians have no health benefits at all.
Part One: Re-engineering the Grid
Electricity has been a viable and fundamental power source since Michael Faraday invented the dynamo in 1831.
Solutions to Four Real-World Problems that Installers Face Every Day
From jobsite surprises to installation mistakes, low-voltage installers have their hands full on a daily basis. Anything they can do to reduce costs or save time leads to increased productivity and more revenue.
Why Measure Temperature?
Finding a problem with an infrared camera is sometimes not enough. In fact, an infrared camera image alone without accurate temperature measurements says very little about the condition of an electrical connection or worn mechanical part.
Latest Articles
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
-
Code Quiz: Canadian Electrical Code, Part 1, 26th Edition Section 28 – Motors and Generators
by William (Bill) Burr Question: Adam is working in his garage cutting wood on his table saw. Suddenly the lights go out and the sump pump and the table saw stop running. There is obviously a power outage. After a short time, the lights and the sump pump come back on, but thetable saw stays off. Adam needs to restart it. Can you explain why the lights and sump pump come back on… Read More…
-
![Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: 26 the Edition, Section 36 – High Voltage Installations](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: 26 the Edition, Section 36 – High Voltage Installations
Although Rule 36-000 has not yet been amended, note that the definition of voltage in Section 0 – Definitions has been revised in the 26th edition… Read More…
-
Ontario Home Renovation Incentives for Solar
June 2, 2025 Adding rooftop solar panels and a battery energy storage system to a home can help generate clean, renewable energy year round.* A home energy assessment is not required. Solar panels Battery energy storage Solar photovoltaic (PV) technology uses solar cells to convert sunlight directly into electricity. This can help you manage energy costs,… Read More…
Changing Scene
-
New BC Home Energy Planner aims to Help Lower Home-Energy Bills
June 9, 2025 The Province is giving people a free digital tool to help make their homes more energy-efficient and reduce heating bills. The BC Home Energy Planner makes it simple for people to save energy and reduce their environmental footprint at the same time. “Many British Columbians, especially those in older homes, may be… Read More…
-
Schneider Electric Canada Inaugurates a New Production Line in Brossard, Quebec
Schneider Electric Canada announces the expansion of its facility in Brossard, Quebec. This strategic development includes the addition of a new production line dedicated to the local manufacturing of Schneider Electric’s advanced electrical equipment… Read More…
-
ABB Acquires Bel Products Inc. to Expand Enclosures Portfolio in North America
June 3, 2025 ABB Electrification Canada Inc. announced it has completed its acquisition of Bel Products Inc., a Canadian manufacturer of commercial, industrial and custom-made enclosures. This acquisition enhances ABB’s market presence in Canada and the U.S., expanding its product portfolio and enabling the company to leverage its manufacturing, warehousing and supply chain capabilities to better meet growing customer demand. The financial terms of the transaction are undisclosed. The enclosures market is experiencing strong growth, fueled… Read More…
-
WAGO Now Available at Vanco Electrical Solutions
June 2 2025 Vanco Electrical Solutions are excited to announce that Vanco Electrical Solutions has partnered with WAGO, making their full line of innovative spring‑pressure connection and automation products available online at vancoelectrical.com. From their groundbreaking Push‑in CAGE CLAMP® technology to flexible I/O systems, WAGO has built a reputation for reliability and ease of use across… Read More…
