Canadian Electrical Industry News Week

August 30, 2021

CEW 9 Carolina Gallo 400By Line Goyette

Among the recipients of the 2021 Clean50 Awards announced last month is Carolina Gallo, Vice President Government and Institutional Relations Canada, for Hitachi ABB Power Grids Canada. We reached out to Gallo, about the experience. But first, a little about the Clean50 Awards.

These annual awards recognize Canadian leaders in sustainability for their contributions over the prior two years. Created by Delta Management, Canada’s leading sustainability, ESG and clean tech focused search firm, the awards recognize remarkable and inspiring leaders and try to connect these leaders in order to bridge those gaps, and build connections that might not otherwise occur.

“We felt that the challenges facing Canada could not be resolved by anything less than a collaborative, all-out assault on every element of the problem,” the company says. “We had noticed that organizations and industries tended to operate in their own individual silos, and often failed to connect to others from different silos where there might be transferable solutions, skills and knowledge.”

In Carolina Gallo’s day job and other positions at organizations throughout Canada, she drives campaigns to advance sustainability. She has been involved in teams building diversity and inclusion policies for the Maritime Link, promoting electrical infrastructure to decarbonize cities as Chair of the Canadian Urban Transportation Research Innovation Consortium, and working with First Nations to establish microgrids, such as the Fort Chipewyan microgrid/battery storage/solar project with ATCO and 3NE. Carolina ensured industry support for the Pan Canadian Electric Bus Demonstration and Integration Trial promoted by CUTRIC, the first project in the world to design, develop, and integrate battery electric buses with charging systems that can operate interactively with different industry OEMs.

We asked Carolina to tell us what this award meant to her:

“At the core, I am hyper grateful for the nomination and winning the award in 2021, which according to Delta was a record year for submissions… the number I heard was over 9,000 files were proposed and this was a first for Gavin Pitchford and Delta Management Clean50.

“Humility and gratitude remain the order of the day since it is thanks to women leaders in the industry like Dr. Josipa Petrunic, the CEO of CUTRIC and to mention a previous boss, Nathalie Pilon. I would also like to underline the contribution of an esteemed colleague at Hitachi ABB Power Grids, Elizabeth Kollross, who supported the coordination with our customer for the submission of their microgrid project in Alberta, the utility ATCO, and the First Nations communities represented by 3NE.

“It is thanks to Elizabeth, with her outreach to our customer and community partners, who agreed to share that this great story of sustainability and our technology collaboration was submitted alongside my individual nomination as Honoree 2021. I was very lucky to have such generous colleagues who collaborated like that.”

What’s the take-away from this nomination process?

“Strong women who are authentic leaders encourage other women around them to reach further heights,” says Carolina.

“The sustainability challenge of the energy transition makes behaviours of collaboration and trust imperative, and this is what the Canada Clean50 does.”

Find out more about the awards

Clean50 individual award winners are selected from 16 categories that transcend industries, academia, government, thought leaders and advocates, and are based on accomplishments delivered over the prior two years. Learn more here.

Line Goyette is Managing Editor of Kerrwil Publications’ Electrical Group.

 

Changing Scene

  • Prev
Last week's disastrous floods have left many B.C. residents homeless, stranded or in desperate need ...
The Canadian Apprenticeship Forum (CAF-FCA) will launch a new program to empower skilled trades ...
Sean Dunnigan, President of Techspan Industries Inc., is pleased to announce the appointment of ...
The Electrical Safety Authority (ESA) would like to advise that the Minister of Government and ...
LabTest Certification Inc. is proud to announce its most recent recognition by OSHA as a Nationally ...
On November 13th, the Universal Women’s Network virtually hosted the 2021 Women of ...
Soussanna Karas, Director of Licensing at ESA, breaks down the risks of the underground economy ...
BCEA U40 group invites you to their Professional Development virtual series...     ...
Three accomplished women with diverse backgrounds are the newest members of Ontario Power ...


 

EIN ABB logo 400ABB is an international company with a large global presence, but did you know that a significant percentage of the products sold in Canada are also designed and manufactured locally?

ABB’s Installation Products division, formerly known as Thomas & Betts, operates seven manufacturing facilities in Canada, six of them in Quebec and one in Alberta.

Many of their most well-known brands, including IBERVILLE®️️, Marrette®️️, Microlectric®️️, and Star Teck®️️, are products that started in Canada and are still manufactured locally to meet Canadian standards.

 

 


 

Canadian Electrical Contractor Discussion Group: Can You Count the Deficiencies?

EIN CECD 400Have you ever been called to fix the work of a 'handyman'?

"Was supposedly done by a"certified ' electrician....told the homeowner that he got a $266 permit....no record at TSBC. Can you count the deficiencies?"

"There is a second panel change in the triplex also.......even more deficiencies. Think the guy was a glorified handyman. Ones not obvious: 240 BB heat hooked up 120....drier on 2p20....range on 2p50....water heater fed with 2c14 Bx on 2p15."

Go HERE to join the discussion

 


 

Latest Articles

  • Prev
As I come to the end of my second year of apprenticeship, I find myself reflecting on the last ...
Ever since I’ve been a kid, I thought I was unique.  My skills, personality, likes and ...
On November 10, 2021, Schneider Electric held its virtual Innovation Summit North America, which ...
All energized electrical work tasks performed require an Energized Electrical Work Permit (EEWP) to ...
Siemens' Cloud Apps portfolio includes a collection of Apps that use the Cloud to connect to ...
The employment income of those who certify in the trades, otherwise known as journeypersons, ...
Heat pumps use air to heat refrigerant to produce heat inside the home. They are an alternative ...
Rule 46-000 Scope – states that Section 46 is a supplementary or amendatory section of the code and ...
In Canada, approximately one in three households use electric baseboards, with Quebec, BC, ...
 In Ajax, Ontario, Ideal Industries (Canada) Ltd. conducted an Electrical boot camp for ...


 

 Siemens Built In Isolation Products 400By Alyssa Kerslake

Life safety today is top of mind for nearly everyone. There is a certain level of trust that fire alarm systems continue to work within a fire incident. With system survivability being a key concern to regulators, building managers, and the public, Siemens has developed systems that are designed to meet and exceed regulations that protect people, property, and assets. 

One of the most significant concerns, particularly in a large multi-story building, is implementing a secure and fully functional fire alarm system. Today, it is not uncommon to have power and data for hundreds of fire alarm devices connected over a single pair of wires. The concern is, if a fault occurs somewhere between the devices, the zone and location of the device may no longer be known, or the operation of that circuit reduced or possibly impaired. These scenarios could allow an undetected catastrophic event to develop within the space due to inoperable life safety devices. 

 

Read More


 

 

David Gordon

By Terry Becker, P.Eng., CESCP, IEEE Senior Member

The CSA Z462 Workplace electrical safety Standard published its 2021 Edition in January.  A mandatory requirement for an employer is developing, implementing, and auditing an Electrical Safety Program.  If you have an Electrical Safety Program, is it up to date in its policies, practices and procedural requirements, is it performing as expected?  Workers do not necessarily do what you expect, they do what you inspect!  Management of change is required.

I have been involved in supporting industry with respect to shock and arc flash hazards in the workplace and in understanding what needs to be done to ensure worker safety, that effective defendable due diligence is established, and evidence of compliance is available related to occupational health & safety regulations both Provincial, Territorially or Federally.  I am in Ontario this week completing a detailed Electrical Safety Audit at multiple enterprise facilities.


Read More


 

 

AMI

By Jerome Leroy - VP, North America, Buildings & Territories

In just 18 months, our industry has seen businesses locked down and borders closed. Lead times have grown from weeks to months and orders have been cancelled. Copper prices have nearly doubled and continue to increase. We’ve seen an increasing number of extreme weather events, for instance Texas shut down by cold weather and British Columbia hit by record heat. And, of course, the pandemic has affected every economy in the world.

Make no mistake: these events characterize a new normal where, we believe, we’re seeing the emergence – and acceleration – of two widescale trends. The first is supply chain disruption. The second is the rise of Corporate Social Responsibility (CSR).

Read More


 

Product News

  • Prev
On the hottest days of the summer and the coldest of the winter, the Napoleon NS18 heat pump and ...
Lumenwerx is pleased to launch Aera, an innovative lighting family that marks a new era in recessed ...
Eaton’s humidity sensor and fan control (HDFS3P1) device is a single pole humidity sensor for ...
With an EC motor and smart control, ORA-EC40 series air curtains are ideal for commercial and ...
Klein Tools expands its line of insulated screwdrivers with new lengths and tips, as well as a new ...
EarthTronics LED High Lumen Wattage & Color Selectable Series to provide flexibility and full ...
Eaton’s astronomic programmable timer (AT18HM) device reduces energy consumption by automating ...
The HomeGuard LED family of residential security lights, with rugged die cast aluminum ...
This preassembled constant wattage heating cable from Ouellet is specialized for roof and gutter ...


 

Milwaukee M12 Cable Stripper

Connect plug-in lamps, holiday lighting, and small appliances to the top “Controlled” outlet, while the bottom “Powered” outlet remains always on. The DW15R features tamper resistant receptacles with built-in shutters to prevent the insertion of unintended foreign objects. As well, the integrated button with vanishing feedback LED provides manual push-button on/off control and clear indiciation at any time.

Simplify control of the residence - schedule lamps and connected loads to turn on/off at specific times or based on sunrise/sunset, easily group smart devices into rooms, and create scenes to activate multiple loads at once. Utilize the auto-shutoff feature as a countdown timer in closets, hallways and bathrooms.

Read More


 

 

Incoplas Hybrid

Now available for Siemens Class 52 Actuators and Indicator Lights are the new Class 1, Div. 2 contact blocks. Suitable for use in Hazardous Location, Class 1, Div. 2 applications when used in a suitable enclosure. No matter which style actuator you use, the common base provided attaches to the hazardous location contact blocks easily.

Hazardous Location (HL) Series Contact Blocks are good for Hazardous Location CL1, DIV2 Applications using a Standard Enclosure NEMA 1, 12, 13, 4, 4X.

HL Series Contact Blocks are rated for switching high inrush loads like Tungsten Lamps.

 

Read More


 

 

EarthTronics 25-Watt Emergency Driver for Linear Highbay

The 20A Outlet and 15A Outlet have the ability to allow function specific Inserts to be installed/removed/swapped making this platform an optimal choice for renovations and new construction. The Swidget Outlet is installed using the same wiring as a standard wall receptacle and when paired with a Swidget Insert turns into a powerful and flexible Smart Home device. The swapability of the Inserts ensures that this will work with Smart Home wireless systems now and in the future.

The Swidget product line targets the Home Automation and Smart Home markets with a unique future-proof solution. Swidget currently offers eight smart Inserts with different functionalities including Wi-Fi control, indoor air quality sensor, temperature, humidity, and motion sensors, as well as a USB charger guide light, and emergency lighting. They can all be controlled from anywhere with the Swidget App for iOS/Android or Alexa and Google Home.

Read More


 



EngWorksBy Blake Marchand

EngWorks was formed in 2004 as an electrical engineering and consulting firm by Allan Bozek, “After a short time we realized there was a niche in hazardous locations, in particular in hazardous area classification design requirements for various facilities. And also helping people understand just how the Canadian Electrical Code applies to hazardous locations.”

Given the complexity of hazardous locations, Bozek saw a need for education while working in the field and began developing training courses designed.

Read More


 

Éric DeschênesBy Line Goyette

As the head of ABB Canada's electrification business unit, Éric Deschênes is no newcomer to the electrical industry. He has a long track record and a passion for finding practical solutions to optimize technology adoption. Deschênes took on his current role with ABB January of 2020, he joined ABB in 2017 as Executive VP of the Electrification business after 15 years with Schneider Electric.

We met with him recently to discuss his new role at the helm of ABB Canada and his plans moving forward. He began by pointing out that the recent change to ABB Canada's structure, as elsewhere in the world, was made to make customer relations more straightforward. 

Read More


 

Copper $US Dollar price per pound

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil