Square D Surgebreaker Plus Whole Home Surge Protective Device
Giving the home maximum surge suppression which includes HEPD80 for lasting protection, and up to 80 kA and offers 120/240V AC voltage protection…
-
-
Eaton System Combination-type AFCI
Eaton’s Arc Fault Circuit Interrupters (AFCIs) use advanced electronic technology to reduce fire hazards in electrical circuits, including connected cords. They meet the requirements of Standard for Safety, CEC 2015 for devices that reduce the effects of persistent arcing faults that may pose a risk of fire under certain conditions.
-
Phenolic Fiberglass Conduit Provides Safety Solution for Emergency Circuits and Hot Environments
Atkore’s FRE Composites® BreathSaver® XW fiberglass conduit system uses a non-metallic, phenolic resin-based matrix to protect electrical cable in extreme temperatures and flames, while also offering superior corrosive resistance to water and most chemicals.
-
Atkore Fiberglass Alternatives Help Customers Overcome Current Conduit Market Challenges
Atkore’s FRE Composites® fiberglass conduit recently experienced increased demand in above- and below-ground applications due to an overall surge in the conduit market.
-
Ortech DC Motor Bathroom Fan
4 speed Supreme Series fan with an optional speed controller DMD-LED-3.
-
Introducing the BradyPrinter i5300 Industrial Label Printer
Set up, switch out and print faster than you ever imagined with the BradyPrinter i5300 Industrial Label Printer.
-
Siemens BoltShield QSPD Residential Surge Protection Devices
Siemens whole-house protection devices defend the sensitive electronics that are susceptible to surge related activity. The new BoltShieldTM QSPD series and Circuit Breaker & Surge Protective Device offer economical and easy-to-install solution for home safety.
-
Littelfuse LSP05GI Series Thermally Protected Surge Protective Device
LSP05GI Series LED Lighting Surge Protection Modules are designed for use in outdoor and commercial LED lighting fixtures for transient overvoltage protection. Their 10kV/5kA surge handling capability will enhance the LED lighting fixture’s surge immunity and extend its operating lifetime.
-
Milwaukee® Expands Lighting Solutions with New Hands-Free Underbody Light
Milwaukee Tool expands their Lighting Solutions once again with the introduction of the M12™ Underbody Light.
-
Milwaukee M12 Cable Stripper
M12™ Cable Stripper Kit for Cu THHN / XHHW aims to improve the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper’s compact, right-angle design allows you to maneuver it more easily in tight spaces with less strain on the wrist.
-
Arlington Expanded SL24 SliderBar Line
Here’s the easy, NEAT way to mount single or two-gang boxes between wood or metal studs with non-standard spacing. Arlington’s steel SliderBar™ looks great and saves about 20 minutes per box over cutting, nailing and placing extra 2x4s.
-
SYLVANIA UltraLED™ Ultrasonic Stairwell Fixture
LEDVANCE, the makers of SYLVANIA general lighting in the United States and Canada, has released the new SYLVANIA UltraLED™ Ultrasonic Stairwell fixture that features both CCT and Lumen selectability.
-
Siemens Basic Residential VersiCharge, 3rd Generation
The VersiCharge AC series, in its 3rd generation, is the result of continuous development and improvement of EV chargers for nearly ten years.
-
DCC-12 Electric Vehicle Energy Management System
DCC-12, manufactured by Thermolec, is an Electric Vehicle Energy Management System (EVEMS) designed to allow the connection of a charger to the main feeder of the panel without affecting the load calculation.
-
EarthTronics Expands Energy-Saving Linear LED Line for Commercial Retrofit Applications
EarthTronics now offers a complete line of T5, T8 slamp solutions for use directly with existing fluorescent ballast systems and Type B direct wire or ballast by-pass LED tubes. Available in stock, the new products provide an energy-saving solution for commercial, municipal, school and university building retrofit applications.
-
Eaton’s Wiring Devices Introduces a Humidity Sensor and Fan Control
Eaton’s humidity sensor and fan control device is a single pole humidity sensor for controlling the humidity level in a room. This sensor controls the humidity level by detecting excess humidity in damp areas, such as bathrooms, laundry rooms or spas, then activating the ventilation fan when humidity is present and turning the fan off when the humidity level has dropped.
