Retrofitting Canadian Homes for Energy Savings: Oil to Electric Conversion

EIN Mitsubishi Case Study 400

November 15, 2021

The Challenge

Extreme Canadian temperatures mean we often must rely on heating and air conditioning to keep our homes comfortable throughout the year. But this constant use of energy has a big impact on our utility bills and the environment, particularly in rural areas where oil is often used for heating and less expensive fuel sources may not be available.

This is especially true when it comes to heating in sub-zero weather. Research shows that Canadian households spend more energy for space heating than all other end uses combined [i]. But energy consumption only goes up when households are using older heating systems, and even more so when using oil to heat a home.

The desire for lower energy bills and carbon emissions is familiar for the Boivin’s, who used to spend over $6,000 a year on utility bills and $4,000 alone on oil.

Located in Campbellford, Ontario in a rural community not serviced by natural gas, their 1,800-square-foot bungalow was built in the early 1970s and relied on an oil furnace for heating. It has three bedrooms, one bathroom and a large masonry fireplace in the centre of the living room.

With little insulation and set on top of a hill that makes it vulnerable to heavy winds, the house suffers from air gaps and cold drafts. So, the family decided to invest in a new energy-efficient heating solution that works better for their wallet and the planet. The new heating system needed to perform well even in extreme cold temperatures.

The Solution

As the owners of René’s Total Home Comfort – a company dedicated to providing customers with quality heating and cooling solutions such as stoves, furnaces, air conditioners and custom ductwork – the Boivin family was familiar with their options and knew where to find the best products.

In this case they needed a centrally ducted cold-climate system. They selected the Mitsubishi Electric Zuba heat pump. Designed to be ultra efficient in cold climates, the heat pump is the ideal solution for keeping their space warm in winter while saving money on their energy bills.

In fact, a study conducted by Natural Resources Canada found that homeowners using high performance heat-pump systems can save 59% on heating costs, or $9.57 a day, over oil furnaces, depending on the region and home performance level. [ii]

This is because heat pumps use the same vapour compression technology found in refrigerators and air conditioners to move heat inside. The result is not only lower utility bills, but also reduced greenhouse gas emissions and a heating solution that is better for homeowners and the environment.

The Results Summary

The Mitsubishi Electric Zuba Cold Climate Heat Pump has proven to be extremely energy efficient, leading to significant savings on the household heating bills. The Boivin family has saved over $4,000 on energy costs in the first year, with percentage savings of over 60% — which is in line with the amount forecasted by the Natural Resources Canada study.

Even though they switched systems and technology, the Boivins experienced a seamless transition that allows them to enjoy increased efficiency at a lower cost. In addition to the dollar savings, the new heat pump means less carbon emissions, the convenience of heating and cooling from a single system, and space savings thanks to a much smaller unit. Their home insurance policy premium even decreased.

The system also performs exceptionally well in extreme cold weather, allowing them to remain comfortable in their home all year round.

“No matter what weather we’ve had, the heat pump has run throughout it all,” says Nancy Boivin. “It’s a great asset for our house, that’s for sure.”

Homeowner: Boivin family

HVAC Contractor: René’s Total Home Comfort Ltd.

Location: Campbellford, Ontario

Industry: Residential

Size: 1,800 square feet

Challenges: Find a new energy-efficient heating solution that lowers high utility bills for a family home in rural Ontario.

Selection Criteria:

  • Energy-efficient heat source
  • Excellent cold-climate performance
  • Superior alternative to oil furnace

Design/Engineering Solution: 3-ton Mitsubishi Electric cold climate system with a centrally ducted vertical air-handling unit.

Mitsubishi Electric outdoor unit model: 1 X PUZ-HA36NHA5

Mitsubishi Electric indoor unit model: 1 X PVA-A36AA7

Results:

  • Significant energy savings of over $4,000/year
  • Continuous comfort and warmth during winter

[i] Natural Resources Canada, “National Energy Use Database,” 2016. [ii] Based on a 2014 Study by Natural Resources Canada comparing electric baseboard heating vs. a heat pump. Potential savings may vary depending on type of equipment, personal lifestyle, system settings, equipment maintenance, and installation of equipment.

Source

Related Articles


Latest Articles

  • Stephanie Medeiros on EV Infrastructure in Canada, Innovative Technologies, Well-Planned Charging Networks, & Commercial Fleets

    Stephanie Medeiros on EV Infrastructure in Canada, Innovative Technologies, Well-Planned Charging Networks, & Commercial Fleets

    September 3, 2026 By Blake Marchand In this Q&A with Stephanie Medeiros, the Head of Mobility at Schneider Electric Canada provides insight into her perspective on EV charging infrastructure in Canada, factors that will contribute to growing EV adoption, grid modernization for commercial fleets, the role of Vehicle-to-Grid and other innovative approaches to electrification. The focus of… Read More…

  • LEDVANCE: Understanding Light Beam Angles

    LEDVANCE: Understanding Light Beam Angles

    September 3, 2026 Light Beam Angles: How It Affects Different Types of Lighting, Where It Is Applied & What to Consider When Choosing the Right One Beam angle is important in lighting design. It determines how light spreads within a space and influences both functionality and atmosphere. By understanding beam angles, you can achieve both… Read More…

  • ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    September 2, 2026 By ITC Electrical Components When selecting industrial electrical components, certification is more than a logo on a datasheet. A certification mark indicates that a product or component has been independently evaluated against specified requirements for its intended market. In North America, selecting products with the appropriate certification can affect regulatory acceptance, equipment… Read More…

  • Project Spotlight: Leigh Square Fountain

    Project Spotlight: Leigh Square Fountain

    September 2, 2026 In spring 2025, the City of Port Coquitlam unveiled a transformed Leigh Square, reimagined as a vibrant, accessible, and welcoming gathering place in the heart of downtown. At the heart of the renewed plaza, a Bellagio-style programmable dancing fountain is integrated directly into the paving—three interlocking rings where jets rise, fall, and… Read More…


Changing Scene

  • 2026 Ontario Apprenticeship Awards Call for Nominations

    2026 Ontario Apprenticeship Awards Call for Nominations

    September 3, 2026 Skilled Trades Ontario is proud to open nominations for the 2026 Ontario Apprenticeship Awards, recognizing outstanding apprentices, journeypersons, organizations and skilled trades leaders who are helping strengthen Ontario’s apprenticeship system. Award recipients will be announced at the Ontario Apprenticeship Summit on November 4, 2026, at the Toronto Congress Centre. Nominations must be submitted… Read More…

  • Bartle & Gibson Announces New Partnership with Hubbell Canada

    Bartle & Gibson Announces New Partnership with Hubbell Canada

    September 3, 2026 Bartle & Gibson Co. Ltd., an Alberta-based premier plumbing, heating and electrical distributor and Hubbell Canada have announced a new regional partnership enabling increased access to Hubbell Canada’s end-to-end electrical product portfolio across Western Canada. “With our strong presence in the west through 31 branches and counting located in Alberta, Saskatchewan, British… Read More…

  • Bartle & Gibson Opens Salmon Arm Location

    Bartle & Gibson Opens Salmon Arm Location

    September 3, 2026 Bartle & Gibson opened their new Salmon Arm location on July 20th. The Salmon Arm location features: This site is strategically positioned in the city of Salmon Arm, located near to the busy Picadilly Mall.  Salmon Arm branch is located at: 621- 10 Street SW Salmon ARM, BC V1E 1T1 Photo Source Read More…

  • MacKinnon Magnetics Announces Partnership with Resilient Sales Corporation in Northeastern Ontario

    MacKinnon Magnetics Announces Partnership with Resilient Sales Corporation in Northeastern Ontario

    September 3, 2026 MacKinnon Magnetics is pleased to welcome Resilient Sales Corporation as their newest sales agency partner. Resilient Sales will represent MacKinnon Magnetics across Northeastern Ontario, including the Districts of Muskoka and Parry Sound. Key markets include Sudbury, North Bay, Timmins, Kirkland Lake, Sault Ste. Marie, Huntsville, Bracebridge and Parry Sound. “This partnership expands… Read More…