November 24, 2021
The 250-MB is used to connect a properly deburred length of EMT raceway to a box device, panelboard, or similar electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from the conduit end.
Go HERE for more information
July 24, 2023 The Moon Puck offers a smooth wall wash effect, with a low profile for recessed or surface mount applications. This fixture is perfect for undercabinet areas such as in a kitchen or millwork applications like a bookshelf to illuminate items on the shelf. Link multiple fixtures together for a faster installation. Plus,…
A continuous band of flawless light output with no pixelated hot spots – even without a lens. 3-Step MacAdam LED binning for uniformity in both color and intensity.
October 4, 2024 Carlo Gavazzi is pleased to announce our new and innovative DCM1 Energy Meter with Ethernet which is aimed at the emerging and growing DC metering requirements in Fast Chargers for Electric Vehicles. EV charging applications today are mainly based on fast, ultra-fast, and hyper-fast chargers, and Carlo Gavazzi continues to develop innovative and flexible solutions to meet the needs…
Inadequate flare purge rates present a serious safety hazard and could lead to flashback. Too high of a purge rate is a waste of valuable fuel gas and is environmentally irresponsible.
KYORITSU 3551/3552/3552BT1000V Digital Insulation / Continuity Tester with Memory & Bluetooth Communication Function available at Duncan Instruments.
Duct Heaters are used in a variety of air and gas heating applications. These are intended to be installed in existing ducting and can be mounted in any direction. The heater is comprised of our high quality Incoloy 800 elements mounted in a 3/8″ thick flange using bulkhead fittings.
November 18, 2024 Technical Advisor Diana Madill shares her inspiring career journey from electrician to inspector and how she overcame challenges as a woman in the trade. If you’ve ever wondered about becoming an Electrical Safety Authority (ESA) inspector, Diana Madill has a path she encourages you to follow. From her humble beginnings inspired by… Read More…
November 18, 2024 On November 7th, the YPN Quebec Region hosted its last 2024 event, the YPN Panel discussion. The panel discussion was moderated by Marcos Simard of Wesco, President of the Quebec YPN Committee. Three leaders from the electrical industry, Gilles Motard, VP operation, Lumen, Corinne Galarneau, company VP, Agence Ricard, Stéphanie Santini, VP… Read More…
The Electrical Safety Authority would like to advise that, following robust consultation, the Minister of Public and Business Service Delivery and Procurement has approved the regulatory amendment to adopt the 2024 Ontario Electrical Safety Code (OESC), which comes into effect on May 1, 2025. Read More…
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 22](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Rule 22-000 outlinesthe Scope of Section 22 and that it amends or supplements the general requirements of the code. It provides specific rules for locations classified as Category 1 (moisture) or Category 2 (corrosive) environments that are significant enough to interfere with normal operation of electrical equipment. Read More…
November 18, 2024 The federal government is providing nearly $364 million to help build 989 new homes in Montreal. The announcement took place at 5200 rue de la Savane, in Montreal, which received $100 million dollars through the Apartment Loan Construction Program (ACLP) to build 303 homes and will be operated by Olymbec. This rental building, named Lynk, is designed to… Read More…
November 18, 2024 ABB completed the previously announced 50/50 joint venture with Niedax Group. The Abnex Inc. joint venture (JV) will broaden solutions and advance opportunities in the rapidly growing North American cable management market. Integrating engineering and manufacturing capabilities of ABB’s Installation Products Division with Niedax Group will enable the newly formed company to deliver a… Read More…
November 18, 2024 The Ontario government is building over 1,300 new electric vehicle (EV) charging ports in small and medium-sized communities, marking a major milestone in the province’s plan to increase access to EV chargers outside of large urban centres and support the electrification of transportation across the province. As the province continues to see… Read More…
November 18, 2024 The Ontario government is launching the second round of its Skills Development Fund (SDF) Capital Stream starting November 29, with over $74 million in available funding to build, expand and retrofit training facilities for workers in the trades, including construction, manufacturing technology and health care. The government is also investing nearly $5 million from the first… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
